Menu
EUR

Valtra 6750 tractor parts & technical data

Steering, front axle, electrics and lighting: more than 110 parts for the Valtra 6750 from the Hitech series are listed here. Some know it as the Valmet 6750.

116 parts found for Valtra-Valmet 6750
Show:
MAHLE Gear reduction starter 3,2 kW, 11 teeth clockwise, 204,3 mm, Ø 89 mm
38%
MAHLE
Gear reduction starter 3,2 kW, 11 teeth clockwise, 204,3 mm, Ø 89 mm
€525,60 €434,38 €328,45 €271,45
 
Cobo Flasher unit 12 V, 2+1+1 / 8 x 21 W, 6 connections, with holder
5%
Cobo
Flasher unit 12 V, 2+1+1 / 8 x 21 W, 6 connections, with holder
Version: 12 V / 2 + 1 + 1 x 21 / 8 x 21 W, With bracket, With hazard warning lig...
€55,70 €46,03 €52,90 €43,72
 
LED headlight dipped beam / main beam 12 / 24 V, 167 x 107 x 78 mm
10%
LED headlight dipped beam / main beam 12 / 24 V, 167 x 107 x 78 mm
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs included:...
€124,89 €103,21 €112,95 €93,35
 
Scharmüller Drawbar frame prepared for drawbar 71,9 kN, 2000 kg, rail 335 mm
Scharmüller
Drawbar frame prepared for drawbar 71,9 kN, 2000 kg, rail 335 mm
Version: Prepared for drawbar | Detent pin Ø (mm): 22 | Load capacity (kg): 2000...
€1.228,70 €1.015,45
 
Cobo Contact switch mechanical brake light, clutch, PTO shaft, 12 / 24 V
Cobo
Contact switch mechanical brake light, clutch, PTO shaft, 12 / 24 V
Version: For brake light, clutch, four-wheel drive, PTO, 12/24 V, power rating: ...
€39,10 €32,31
 
GRANIT LED work lights spotlight 3600 lm, 36 W, 148 x 95 x 58 mm
10%
GRANIT
LED work lights spotlight 3600 lm, 36 W, 148 x 95 x 58 mm
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs included:...
€78,15 €64,59 €70,70 €58,43
 
Axial joint 205 mm, M22 x 1,5, M22 x 1,5, Ø 56 mm, Ø 40 mm
5%
Axial joint 205 mm, M22 x 1,5, M22 x 1,5, Ø 56 mm, Ø 40 mm
A: 205 mm. C: M22 x 1,5 mm. D: M22 x 1,5 mm. Ø B: 56 mm. Ø E: 40 mm.
€78,20 €64,63 €74,25 €61,36
 
Collet set Valtra-Valmet 255-865
Collet set Valtra-Valmet 255-865
€5,45 €4,50
 
Scharmüller Drawbar K50 Cramer, rail 335 mm, pin Ø 22 mm, 31 kN
12%
Scharmüller
Drawbar K50 Cramer, rail 335 mm, pin Ø 22 mm, 31 kN
Rail width: 335 mm. Guide width: 30 mm. Detent pin Ø: 22 mm. Load capacity: 250 ...
€907,50 €750,00 €802,55 €663,26
 
Wabco Trailer control valve 8 bar, M22 x 1,5, NW 10 mm
5%
Wabco
Trailer control valve 8 bar, M22 x 1,5, NW 10 mm
Working pressure (bar): 8 | Connection: M22 x 1.5 | Nominal width (mm): 10
€586,12 €484,40 €556,80 €460,17
 
HELLA Headlight left / right 12 / 24 V, H4, glass 164 x 103 mm, built-in Fendt
HELLA
Headlight left / right 12 / 24 V, H4, glass 164 x 103 mm, built-in Fendt
Bulb: 12V60/55W / H4, 12V4WK / T4W, 24V75/70W / H4, 24V4WK / T4W. Fixing: 3-poin...
€103,20 €85,29
 
Ball joint 205 mm, M20 x 1,5, M22 x 1,5, taper 23,5 - 26,2 mm
5%
Ball joint 205 mm, M20 x 1,5, M22 x 1,5, taper 23,5 - 26,2 mm
A: 205 mm. C: M20 x 1,5 mm. D: M22 x 1,5 mm. E: 23,5 mm. F: 26,2 mm. Taper: 23,5...
€70,41 €58,19 €66,85 €55,25
 
Glow plug 12 V, 15,5 A, thread 7/8 inch - 14 UNF
Glow plug 12 V, 15,5 A, thread 7/8 inch - 14 UNF
Version: 12 V, 15.5 A, thread 7/8" - 14 UNF.
€32,40 €26,78
 
Inlet valve engine Sisu 320-620
5%
Inlet valve engine Sisu 320-620
€36,60 €30,25 €34,75 €28,72
 
GRANIT Oil drain valve M18 x 1,5
5%
GRANIT
Oil drain valve M18 x 1,5
Thread: M18 x 1.5.
€65,32 €53,98 €62,00 €51,24
 
Door lock, left Massey Ferguson, Case IH, Steyr
5%
Door lock, left Massey Ferguson, Case IH, Steyr
€47,50 €39,26 €45,10 €37,27
 
MAHLE Starter motor 12 V, 3,0 kW, 10 teeth, Ø 89 mm, 254 mm, clockwise
38%
MAHLE
Starter motor 12 V, 3,0 kW, 10 teeth, Ø 89 mm, 254 mm, clockwise
€489,63 €404,65 €306,00 €252,89
 
Scharmüller Drawbar ball 50 rail 335 mm, pin Ø 22 mm, 250 kg, AGCO gray
16%
Scharmüller
Drawbar ball 50 rail 335 mm, pin Ø 22 mm, 250 kg, AGCO gray
Rail width: 335 mm. Guide width: 30 mm. Detent pin Ø: 22 mm. Load capacity: 250 ...
€889,04 €734,74 €748,81 €618,85
 
LUK Torsion damper Valtra-Valmet C90 - C150, M120 - M150, N82 - N142
5%
LUK
Torsion damper Valtra-Valmet C90 - C150, M120 - M150, N82 - N142
€767,99 €634,70 €729,55 €602,93
 
GRANIT Master brake cylinder K1, DOT 4, Valtra-Valmet, Case IH
5%
GRANIT
Master brake cylinder K1, DOT 4, Valtra-Valmet, Case IH
Description: K1.
€132,08 €109,16 €125,45 €103,68
 
Scharmüller Drawbar ball 50, rail 200 mm, pin Ø 16 mm, 150 kg
Scharmüller
Drawbar ball 50, rail 200 mm, pin Ø 16 mm, 150 kg
Rail width: 200 mm. Guide width: 25 mm. Detent pin Ø: 16 mm. Load capacity: 150 ...
€561,80 €464,30
 
SANDEN Aircon compressor SD7H15 12 V, pulley Ø 132 mm, 2 grooves Valtra-Valmet
5%
SANDEN
Aircon compressor SD7H15 12 V, pulley Ø 132 mm, 2 grooves Valtra-Valmet
Oil quantity (ccm): 135 | Suitable oil: SP - 10 | Refrigerant: R 134a | Connecti...
€562,03 €464,49 €533,90 €441,24
 
HELLA Alternator 14 V, 120 A Fendt, Valtra-Valmet
20%
HELLA
Alternator 14 V, 120 A Fendt, Valtra-Valmet
Nominal values (V / A): 14 / 120 | Charging current (A): 120 | Nominal voltage (...
€531,65 €439,38 €427,40 €353,22
 
Showing 1 - 24 of 116

Valtra 6750 parts, also sold as the Valmet 6750

Plenty of these tractors still wear the Valmet badge, and the Valmet 6750 and Valtra 6750 are one and the same machine. Given the hours these tractors have clocked, an engine overhaul is often next on the list, and that is where this page earns its place. More than 110 parts fit the 6750, from makers such as GRANIT, Scharmüller, DANA Spicer, MAHLE and Cobo.

Rebuilding the engine

For the bottom end and top end there are piston ring sets, connecting rod bolts, a crankshaft seal and a valve cover gasket, along with seal kits, O-rings and individual seals such as the one between the exhaust manifold and turbocharger.

Always fit new connecting rod bolts during a rebuild. They stretch slightly when torqued and will not hold the same clamping force a second time. Oil the threads and tighten in stages to the engine figures. Press the new crankshaft seal in square, and never drag its lip over a sharp edge or keyway, or it will weep before the tractor has done a day of work.

Electrics, cab and steering

  • An alternator, plus a flasher unit with holder and warning light connection.
  • Work lamps and combined indicator and position lights.
  • Door locks for left and right cab doors.
  • Ball joints for worn steering linkage.
  • A ball type drawbar and separate hitch balls.

If the indicators suddenly flash at double speed, a bulb has usually blown or a holder has a poor contact. Only once every bulb and earth connection checks out is the flasher unit itself the likely fault. The unit for this tractor comes with a holder and a connection for the warning lamp, so photograph the plug before pulling it off and every wire goes back where it belongs.

To check a ball joint, have someone rock the steering wheel while you watch the joint. Visible movement between ball and housing means it is worn. Count the turns as you unscrew the old one and wind the new joint in by the same amount, which keeps the toe setting close until it can be checked properly.

Getting the right fit

The data plate confirms the model. For engine parts and seals, the number cast or printed on the old component is the safest reference to check against the details given with each product.

Within the Hitech range the 6750 has plenty of company. If you also run another tractor from that range, it has its own page:

The Valtra 8950 is part of the same range. For that one and every other model, go to the overview of Valtra parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart