Menu
EUR

Valtra 6750 tractor parts & technical data

Steering, front axle, electrics and lighting: more than 110 parts for the Valtra 6750 from the Hitech series are listed here. Some know it as the Valmet 6750.

116 parts found for Valtra-Valmet 6750
Show:
Feed pump 5 hole, hole spacing 25/37 and 45 mm, flange 52 mm
Version: 5 holes, Vertical hole spacing: 25/37 mm, Horizontal hole spacing: 45 mm, Flange to lever end: 52 mm. Menke no.: 209000. More
Version: 5 holes, Vertical hole spacing: 25/37 mm, Horizontal hole spa...
€42,99 €35,53 €40,80 €33,72
You save 5%
Piston ring set 3 rings Ø 108 mm, 3 mm trapezoidal ring / 3 mm / 4 mm
Dimensions: 3 rings, Ø 108 mm, 3 mm (trapezoidal ring) / 3 mm / 4 mm. More
Dimensions: 3 rings, Ø 108 mm, 3 mm (trapezoidal ring) / 3 mm / 4 mm.
€46,69 €38,59 €44,35 €36,65
You save 5%
Door lock, right Massey Ferguson, Case IH, Steyr
€47,50 €39,26 €45,10 €37,27
You save 5%
GRANIT Oil pressure switch engine and transmission M10 x 1, 0,15 - 0,45 bar
GRANIT
Version: Thread: M10 x 1 cylindrical, Switching pressure: 0.15 - 0.45 bar, Blade terminal 6.3 mm, AF: 24 mm, Colour: white. Connection: Blade terminal... More
Version: Thread: M10 x 1 cylindrical, Switching pressure: 0.15 - 0.45 ...
€26,20 €21,65
Scharmüller Support plate Piton Fix manual, 445 x 220 x 40 mm, 3 ton, AGCO gray
Scharmüller
D-value (kN): 71,9 | Category: Support plates | Lock: Piton Fix manual | Version: Standard | Colour: AGCO grey | Load capacity (t): 3 | Length (mm): 4... More
D-value (kN): 71,9 | Category: Support plates | Lock: Piton Fix manual...
€950,65 €785,66
Scharmüller Drawbar frame 10 kN, rail width 200 mm, nose weight 350 kg
Scharmüller
Version: Standard | Category: Bearing supports | Guide width (mm): 25 | Rail width (mm): 200 | D-value (kN): 10 | Colour: Black | Detent pin Ø (mm): ... More
Version: Standard | Category: Bearing supports | Guide width (mm): 25 ...
€643,75 €532,02
Wiper motor Massey Ferguson, Valtra-Valmet
€213,99 €176,85 €203,25 €167,98
You save 5%
CARLISLE External plate Hi-Lo 1,5 mm, inner 98,9 mm, outer 142,5 mm, 6 teeth
CARLISLE
Version: thickness = 1,5 mm inner = 98,9 mm outer = 142,5 mm 6 teeth More
Version: thickness = 1,5 mm inner = 98,9 mm outer = 142,5 mm 6 teeth
€13,18 €10,89 €12,50 €10,33
You save 5%
DANA Spicer O-ring differential front axle 755, 1 g
DANA Spicer Plug front axle 745
€19,40 €16,03
Ball joint 210 mm, M22 x 1,5 mm, M24 x 1,5 mm
A: 210 mm. C: M22 x 1,5 mm. D: M24 x 1,5 mm. More
A: 210 mm. C: M22 x 1,5 mm. D: M24 x 1,5 mm.
€59,73 €49,36 €56,70 €46,86
You save 5%
GRANIT Universal joint 30,2 x 82 mm, maintenance-free
GRANIT
A: 30,2 mm. B: 82 mm. Universal joint size: . Lubrication system: Maintenance-free. More
A: 30,2 mm. B: 82 mm. Universal joint size: . Lubrication system: Main...
€162,50 €134,30 €154,35 €127,56
You save 5%
Wheel brake cylinder Ø 34,92 mm, DOT 4, with piston rod Steyr 667, 680
Medium: DOT4. Hole Ø: 34.92 mm. Additional information: With piston rod. More
Medium: DOT4. Hole Ø: 34.92 mm. Additional information: With piston r...
€171,88 €142,05 €163,25 €134,92
You save 5%
GRANIT Brake disc Ø 224 mm, 27 teeth, 4,8 mm thick, organic Valtra-Valmet
GRANIT
Dimensions: Ø 224, 4.8 thick, 27 splines mm. More
Dimensions: Ø 224, 4.8 thick, 27 splines mm.
€72,12 €59,60 €68,50 €56,61
You save 5%
Scharmüller Adapter plate rail width 335 mm, hole pattern 140 x 80 mm, M20
Scharmüller
Load capacity: 3000 kg. D-value: 89,3 kN. Rail width: 335 mm. Hole pattern: 140 x 80 mm. Guide width: 30 mm. Plate height: 150 mm. Thread: M20. Colour... More
Load capacity: 3000 kg. D-value: 89,3 kN. Rail width: 335 mm. Hole pat...
€664,77 €549,40 €587,90 €485,87
You save 12%
Connecting rod bolt TX star 58 mm Valtra-Valmet engine Sisu 320-634
Injection nozzle engine 620DSL, 612DS Valtra, Massey Ferguson
€215,37 €177,99 €204,60 €169,09
You save 5%
Showing 49 - 72 of 116

Valtra 6750 parts, also sold as the Valmet 6750

Plenty of these tractors still wear the Valmet badge, and the Valmet 6750 and Valtra 6750 are one and the same machine. Given the hours these tractors have clocked, an engine overhaul is often next on the list, and that is where this page earns its place. More than 110 parts fit the 6750, from makers such as GRANIT, Scharmüller, DANA Spicer, MAHLE and Cobo.

Rebuilding the engine

For the bottom end and top end there are piston ring sets, connecting rod bolts, a crankshaft seal and a valve cover gasket, along with seal kits, O-rings and individual seals such as the one between the exhaust manifold and turbocharger.

Always fit new connecting rod bolts during a rebuild. They stretch slightly when torqued and will not hold the same clamping force a second time. Oil the threads and tighten in stages to the engine figures. Press the new crankshaft seal in square, and never drag its lip over a sharp edge or keyway, or it will weep before the tractor has done a day of work.

Electrics, cab and steering

  • An alternator, plus a flasher unit with holder and warning light connection.
  • Work lamps and combined indicator and position lights.
  • Door locks for left and right cab doors.
  • Ball joints for worn steering linkage.
  • A ball type drawbar and separate hitch balls.

If the indicators suddenly flash at double speed, a bulb has usually blown or a holder has a poor contact. Only once every bulb and earth connection checks out is the flasher unit itself the likely fault. The unit for this tractor comes with a holder and a connection for the warning lamp, so photograph the plug before pulling it off and every wire goes back where it belongs.

To check a ball joint, have someone rock the steering wheel while you watch the joint. Visible movement between ball and housing means it is worn. Count the turns as you unscrew the old one and wind the new joint in by the same amount, which keeps the toe setting close until it can be checked properly.

Getting the right fit

The data plate confirms the model. For engine parts and seals, the number cast or printed on the old component is the safest reference to check against the details given with each product.

Within the Hitech range the 6750 has plenty of company. If you also run another tractor from that range, it has its own page:

The Valtra 8950 is part of the same range. For that one and every other model, go to the overview of Valtra parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart