Menu
EUR

Valtra 800 tractor parts & technical data

Known as the Valmet 800 too, the Valtra 800 has more than 90 parts listed here, with trailer couplings, electrics and lighting among the groups.

94 parts found for Valtra-Valmet 800
Show:
GRANIT Ball joint 160 mm, C M20 x 1,5, D M22 x 1,5, taper 23,5 - 26,5 mm
5%
GRANIT
Ball joint 160 mm, C M20 x 1,5, D M22 x 1,5, taper 23,5 - 26,5 mm
A: 160 mm. C: M20 x 1,5 mm. D: M22 x 1,5 mm. E: 23,5 mm. F: 26,5 mm. Taper: 23,5...
€97,24 €80,36 €92,35 €76,32
 
Cobo Flasher unit 12 V, 2+1+1 / 8 x 21 W, 6 connections, with holder
5%
Cobo
Flasher unit 12 V, 2+1+1 / 8 x 21 W, 6 connections, with holder
Version: 12 V / 2 + 1 + 1 x 21 / 8 x 21 W, With bracket, With hazard warning lig...
€55,70 €46,03 €52,90 €43,72
 
Collet set Valtra-Valmet 255-865
Collet set Valtra-Valmet 255-865
€5,45 €4,50
 
Walterscheid Ball hitch K80 330 / 25 / 32 mm, 2800 kg, 97,1 kN
21%
Walterscheid
Ball hitch K80 330 / 25 / 32 mm, 2800 kg, 97,1 kN
Quick height adjustment with rotation lock, load capacity up to 40 km/h 2800 kg,...
€2.124,41 €1.755,71 €1.669,15 €1.379,46
 
Cobo Contact switch mechanical brake light, clutch, PTO shaft, 12 / 24 V
Cobo
Contact switch mechanical brake light, clutch, PTO shaft, 12 / 24 V
Version: For brake light, clutch, four-wheel drive, PTO, 12/24 V, power rating: ...
€39,10 €32,31
 
GRANIT LED work lights spotlight 3600 lm, 36 W, 148 x 95 x 58 mm
10%
GRANIT
LED work lights spotlight 3600 lm, 36 W, 148 x 95 x 58 mm
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs included:...
€78,15 €64,59 €70,70 €58,43
 
DANA Spicer Wheel bolt M18 x 1,5, 60 mm final drive front axle 730
DANA Spicer
Wheel bolt M18 x 1,5, 60 mm final drive front axle 730
Length (mm): 60 | Thread: M18 X 1,5
€15,55 €12,85
 
Axial joint 205 mm, M22 x 1,5, M22 x 1,5, Ø 56 mm, Ø 40 mm
5%
Axial joint 205 mm, M22 x 1,5, M22 x 1,5, Ø 56 mm, Ø 40 mm
A: 205 mm. C: M22 x 1,5 mm. D: M22 x 1,5 mm. Ø B: 56 mm. Ø E: 40 mm.
€78,20 €64,63 €74,25 €61,36
 
Wabco Trailer control valve 8 bar, M22 x 1,5, NW 10 mm
5%
Wabco
Trailer control valve 8 bar, M22 x 1,5, NW 10 mm
Working pressure (bar): 8 | Connection: M22 x 1.5 | Nominal width (mm): 10
€586,12 €484,40 €556,80 €460,17
 
Walterscheid Drawbar ball 80 rail 330 mm, pin Ø 25 mm, 4000 kg, black
21%
Walterscheid
Drawbar ball 80 rail 330 mm, pin Ø 25 mm, 4000 kg, black
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000...
€2.166,20 €1.790,25 €1.702,00 €1.406,61
 
Glow plug 12 V, 15,5 A, thread 7/8 inch - 14 UNF
Glow plug 12 V, 15,5 A, thread 7/8 inch - 14 UNF
Version: 12 V, 15.5 A, thread 7/8" - 14 UNF.
€32,40 €26,78
 
Inlet valve engine Sisu 320-620
5%
Inlet valve engine Sisu 320-620
€36,60 €30,25 €34,75 €28,72
 
GRANIT Oil drain valve M18 x 1,5
5%
GRANIT
Oil drain valve M18 x 1,5
Thread: M18 x 1.5.
€65,32 €53,98 €62,00 €51,24
 
Door lock, left Massey Ferguson, Case IH, Steyr
5%
Door lock, left Massey Ferguson, Case IH, Steyr
€47,50 €39,26 €45,10 €37,27
 
Walterscheid Adapter plate rail width 330 mm, hole pattern 160 x 100 mm, M21
21%
Walterscheid
Adapter plate rail width 330 mm, hole pattern 160 x 100 mm, M21
Guide width (mm): 32 | Description: The coupling plate is a height-adjustable sl...
€1.214,60 €1.003,80 €954,30 €788,68
 
MAHLE Starter motor 12 V, 3,0 kW, 10 teeth, Ø 89 mm, 254 mm, clockwise
38%
MAHLE
Starter motor 12 V, 3,0 kW, 10 teeth, Ø 89 mm, 254 mm, clockwise
€489,63 €404,65 €306,00 €252,89
 
GRANIT Bolt set 1ste steering valve 3x M8 x 90
GRANIT
Bolt set 1ste steering valve 3x M8 x 90
Technical data: 3x M8 x 90.
€17,60 €14,55
 
GRANIT Bolt set 2de steering valve 3x M8 x 130
GRANIT
Bolt set 2de steering valve 3x M8 x 130
Technical data: 3x M8 x 130. Description: For 1st Control unit.
€14,95 €12,36
 
Walterscheid Piton Fix rail width 330 mm, locking pin Ø 25 mm, 3000 kg, 89,3 kN
18%
Walterscheid
Piton Fix rail width 330 mm, locking pin Ø 25 mm, 3000 kg, 89,3 kN
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000...
€1.675,85 €1.385,00 €1.382,55 €1.142,60
 
FLEETGUARD Hydraulic oil filter HF35322
10%
FLEETGUARD
Hydraulic oil filter HF35322
€99,05 €81,86 €89,60 €74,05
 
SANDEN Aircon compressor SD7H15 12 V, pulley Ø 132 mm, 2 grooves Valtra-Valmet
5%
SANDEN
Aircon compressor SD7H15 12 V, pulley Ø 132 mm, 2 grooves Valtra-Valmet
Oil quantity (ccm): 135 | Suitable oil: SP - 10 | Refrigerant: R 134a | Connecti...
€562,03 €464,49 €533,90 €441,24
 
Thermostat Ø 67 mm, 83 °C Massey Ferguson, Case IH, Steyr
5%
Thermostat Ø 67 mm, 83 °C Massey Ferguson, Case IH, Steyr
Ø: 67 mm. Temperature: 83 °C.
€36,87 €30,47 €35,00 €28,93
 
Crankshaft seal for Ø 58 x 80 x 12 mm Massey Ferguson
Crankshaft seal for Ø 58 x 80 x 12 mm Massey Ferguson
Outer Ø: 80 mm. Width: 12 mm. Inner Ø: 58 mm.
€14,80 €12,23
 
Bolt set 2de steering valve 3x M8 x 180
Bolt set 2de steering valve 3x M8 x 180
Technical data: 3x M8 x 180. Menke no.: 51682. Description: For 3rd Control unit...
€27,90 €23,06
 
Showing 1 - 24 of 94

Valtra 800 parts, also sold as the Valmet 800

The Valtra 800 is also known as the Valmet 800, so whichever badge your tractor wears, the parts on this page apply. There are more than 90 of them, from GRANIT and from makers such as DANA Spicer, Walterscheid, MAHLE and Cobo.

Turbo and engine

Valtra 800 parts for the engine include remanufactured turbochargers, exhaust manifold seals at the turbo, valve cover gaskets and seal sets, crankshaft seals and connecting rod bolts. O-rings for the feed pump take care of the fuel side.

A replacement turbo will fail just as quickly if the cause of the first failure is still there. Replace oil feed and return lines that are dirty or dented, change the oil and filter, and prime the turbo with clean oil before the first start. Let the engine idle for a while before putting it under load.

Steering, cab, lights

  • Ball joints for the track rods, in left and right versions
  • Bolt sets for the steering valve
  • Door locks for the cab
  • Aircon compressors
  • Work lamps, indicator and position lights and flasher units
  • Drawbars with ball for hitching

If the indicators suddenly flash twice as fast, a bulb has usually blown. Check every lamp before you blame the flasher unit.

Steering play and the cab door

Play in the steering shows on the road as a tractor that wanders. Have someone rock the steering wheel while you watch the front wheels. If a ball joint moves in its housing before the wheel follows, it is worn. Reset the toe-in after fitting a new joint, or the front tyre will wear on one edge. When fitting the steering valve bolt set, tighten the bolts evenly in a cross pattern so the valve seats squarely.

A stiff cab door lock often needs cleaning and a dry lubricant first. Only when the latch no longer catches is a new lock the answer.

Making sure it fits

The type plate gives the model designation even if the tractor has always been called a Valmet on the farm. For ball joints, check left or right and the taper. For door locks, check which side of the cab the door is on. For engine parts, look for the reference number on the part you are removing and compare it with the details given here.

Neighbouring models

Two closely related tractors have their own page: the Valtra 700 and the Valtra 900. Each lists the parts for that model. For the rest of the range, go to Valtra parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart