Menu
EUR

Valtra 8150 tractor parts & technical data

The Valtra 8150, also known as the Valmet 8150, is covered here by more than 170 matching parts, from steering and front axle to electrics and trailer hitches.

172 parts found for Valtra-Valmet 8150
Show:
Master brake cylinder K1, DOT 4, Valtra-Valmet, Case IH
€137,83 €113,91 €126,80 €104,80
You save 8%
LUK Clutch plate TDCA sintered 41 x 45 mm, 22 splines Valtra-Valmet
LUK
Dimensions (mm): 41 x 45 22 grooves | Material specifications: Sintered clutch lining More
Dimensions (mm): 41 x 45 22 grooves | Material specifications: Sintere...
€520,71 €430,34 €479,05 €395,91
You save 8%
Ball head with female thread 23,5 - 26,5 mm, M22 x 1,5, 290 mm Valmet
E (mm): 23,5 | F (mm): 26,5 | A (mm): 290 | Taper (mm): 23,5 - 26,5 | D (mm): M22 x 1,5 | C (mm): M20 x 1,5 More
E (mm): 23,5 | F (mm): 26,5 | A (mm): 290 | Taper (mm): 23,5 - 26,5 | ...
€107,98 €89,24 €99,34 €82,10
You save 8%
Scharmüller Drawbar frame 10 kN, rail width 200 mm, nose weight 350 kg
Scharmüller
Version: Standard | Category: Bearing supports | Guide width (mm): 25 | Rail width (mm): 200 | D-value (kN): 10 | Colour: Black | Detent pin Ø (mm): ... More
Version: Standard | Category: Bearing supports | Guide width (mm): 25 ...
€668,46 €552,45 €614,98 €508,25
You save 8%
PTO shaft end piece 1 3/8 inch, 6 splines Valtra-Valmet
Version: 1 3/8"", 6 grooves More
Version: 1 3/8"", 6 grooves
€206,82 €170,93 €190,27 €157,25
You save 8%
CARLISLE External plate Hi-Lo 1,5 mm, inner 98,9 mm, outer 142,5 mm, 6 teeth
CARLISLE
Version: thickness = 1,5 mm inner = 98,9 mm outer = 142,5 mm 6 teeth More
Version: thickness = 1,5 mm inner = 98,9 mm outer = 142,5 mm 6 teeth
€17,19 €14,20
Clutch master cylinder Valtra-Valmet 6000 - 8750, N91, T120 - T171
€197,43 €163,17 €181,64 €150,11
You save 8%
Alternator 14 V / 95 A, flange 56 mm Valtra-Valmet
Belt tension hole Ø / R (mm): 8,2 / 86,0 | Nominal voltage (V): 14 | Mounting L / d / R (mm): 56,0 / 8,2 / 86,0 | Charging current (A): 95 | Nominal ... More
Belt tension hole Ø / R (mm): 8,2 / 86,0 | Nominal voltage (V): 14 | ...
€263,03 €217,38 €241,99 €199,99
You save 8%
DANA Spicer O-ring as front axle 745, 4 g
€17,60 €14,55
DANA Spicer Spacer as front axle 745, outer-Ø 150 mm, inner-Ø 120 mm, 1 mm
DANA Spicer
Thickness (mm): 1 | Outer Ø (mm): 150 | Inner Ø (mm): 120 More
Thickness (mm): 1 | Outer Ø (mm): 150 | Inner Ø (mm): 120
€46,81 €38,69 €43,07 €35,59
You save 8%
DANA Spicer Intermediate bush as front axle 745, 120 x 127 x 40 mm
DANA Spicer
Dimensions (mm): 120 x 127 x 40 | Inner Ø (mm): 120 | Height (mm): 40 | Outer Ø (mm): 127 More
Dimensions (mm): 120 x 127 x 40 | Inner Ø (mm): 120 | Height (mm): 40...
€140,42 €116,05 €129,19 €106,77
You save 8%
HELLA Alternator 14 V, 120 A Fendt, Valtra-Valmet
HELLA
Nominal values (V / A): 14 / 120 | Charging current (A): 120 | Nominal voltage (V): 14 More
Nominal values (V / A): 14 / 120 | Charging current (A): 120 | Nominal...
€554,78 €458,50 €427,45 €353,26
You save 23%
MAHLE Starter motor 12 V, 3,0 kW, 10 teeth, Ø 89 mm, 254 mm, clockwise
€510,93 €422,26 €306,01 €252,90
You save 40%
Connection cable MS with LED light, 2,5 m
Length: 2.5 m. Version: The connection cable with LED light makes it much easier to connect the cable to the vehicle in the dark. The LED lights up wh... More
Length: 2.5 m. Version: The connection cable with LED light makes it m...
€100,09 €82,72 €92,08 €76,10
You save 8%
Bolt set 1ste steering valve 3x M8 x 90
Technical data: 3x M8 x 90. More
Technical data: 3x M8 x 90.
€18,40 €15,21
Walterscheid Drawbar ball 80 rail 330 mm, pin Ø 25 mm, 4000 kg, black
Walterscheid
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 102 kN. Colour: Black. Description: This product is a b... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€2.152,79 €1.779,17 €1.702,02 €1.406,63
You save 21%
LED work lights spotlight 3600 lm, 36 W, 148 x 95 x 58 mm
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs included: Yes. Light function: Far-reaching illumination. Dimensions W x H x D:... More
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs...
€77,66 €64,18 €71,45 €59,05
You save 8%
Flasher unit 12 V, 2+1+1 x 21 W, with holder and indicator instruments
To fit as: Case IH 238, 248, 258, 268, 278, 288, 323, 354, 374, 384, 444, 474, 475, 484, 584, 674, 684, 784, 884 385, 485, 485XL, 585, 585XL, 685, 685... More
To fit as: Case IH 238, 248, 258, 268, 278, 288, 323, 354, 374, 384, 4...
€48,67 €40,22 €44,78 €37,01
You save 8%
Aircon compressor 12 V, pulley Ø 132 mm, 2 grooves, 135 ccm oil
Reference no.: QP7H15-8024 | Suitable oil: PAG 46 | For compressor: 7H15 | Nominal voltage (V): 12 | Pulley Ø (mm): 132 | Fixing: EM | Oil quantity (... More
Reference no.: QP7H15-8024 | Suitable oil: PAG 46 | For compressor: 7H...
€357,93 €295,81 €329,30 €272,15
You save 8%
LUK Single clutch 360TGFR Eicher 3024 - 3145, Valtra-Valmet 8050 - 8550
€476,14 €393,50 €438,05 €362,02
You save 8%
DANA Spicer Sealing ring final drive front axle 755, 40 x 65 x 18 mm
DANA Spicer
Dimensions (mm): 40 x 65 x 18 More
Dimensions (mm): 40 x 65 x 18
€33,83 €27,96 €31,12 €25,72
You save 8%
Ball joint 260 mm, taper 24 - 26 mm, M20 x 1,5 / M24 x 1,5
A: 260 mm. C: M20 x 1,5 mm. D: M24 x 1,5 mm. E: 24 mm. F: 26 mm. Taper: 24 - 26 mm. More
A: 260 mm. C: M20 x 1,5 mm. D: M24 x 1,5 mm. E: 24 mm. F: 26 mm. Taper...
€82,15 €67,89 €75,58 €62,46
You save 8%
Ball joint 295 mm, M24 x 1,5, M22 x 1,5, taper 29 - 32,2 mm
A: 295 mm. C: M24 x 1,5 mm. D: M22 x 1,5 mm. E: 29 mm. F: 32,2 mm. Taper: 29 - 32,2 mm. More
A: 295 mm. C: M24 x 1,5 mm. D: M22 x 1,5 mm. E: 29 mm. F: 32,2 mm. Tap...
€103,69 €85,69 €95,39 €78,84
You save 8%
Repair set water pump Valtra-Valmet Mezzo 6900, Mega 8000-8400
€150,77 €124,60 €138,71 €114,64
You save 8%
Injection nozzle Case IH CS 100-150, Steyr 9105-9145, Valtra-Valmet
Type formula: ADB145M34447. More
Type formula: ADB145M34447.
€40,71 €33,64 €37,45 €30,95
You save 8%
Glow plug 12 V, 15,5 A, thread 7/8 inch - 14 UNF
Version: 12 V, 15.5 A, thread 7/8" - 14 UNF. More
Version: 12 V, 15.5 A, thread 7/8" - 14 UNF.
€33,85 €27,98
Gasket set top and bottom engine Sisu 620, 634 Valtra T 120-190
€544,68 €450,15 €501,11 €414,14
You save 8%
Reman turbocharger Case IH, Steyr, Valtra-Valmet, Massey Ferguson
€2.163,70 €1.788,18 €2.073,50 €1.713,64
You save 4%
Bolt set 2de steering valve 3x M8 x 130
Technical data: 3x M8 x 130. Description: For 1st Control unit. More
Technical data: 3x M8 x 130. Description: For 1st Control unit.
€15,63 €12,91
Door lock, left Massey Ferguson, Case IH, Steyr
€49,57 €40,97 €45,60 €37,69
You save 8%
Scharmüller Drawbar K80 manual, rail 335 mm, pin Ø 22 mm, 3000 kg, AGCO gray
Scharmüller
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 3000 kg. D-value: 89,3 kN. Plate height: 150 mm. Colour: AGCO grey. Overh... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.349,76 €1.115,50 €1.183,18 €977,84
You save 12%
Stop cable 2015 / 2250 mm Valtra-Valmet 205-905, 6000-8750
To fit as: Valtra - Valmet 205, 305, 365, 405, 465, 505, 600, 605, 665, 700, 705, 805, 865, 900, 905, 6000, 6100, 6300, 6400, 6600, 6800, 8000, 8100, ... More
To fit as: Valtra - Valmet 205, 305, 365, 405, 465, 505, 600, 605, 665...
€34,18 €28,24
Internal plate PTO clutch Ø 133,4 x 93 mm, 1,8 mm, 45 teeth
Version: Thickness: 1.8 mm, inner: 93 mm, outer: 133.4 mm, 45 splines More
Version: Thickness: 1.8 mm, inner: 93 mm, outer: 133.4 mm, 45 splines
€23,45 €19,38
Ball joint 210 mm, M22 x 1,5 mm, M24 x 1,5 mm
A: 210 mm. C: M22 x 1,5 mm. D: M24 x 1,5 mm. More
A: 210 mm. C: M22 x 1,5 mm. D: M24 x 1,5 mm.
€62,32 €51,50 €57,33 €47,38
You save 8%
Connection cable 2,5 m
Length: 2.5 m. Reference no.: 1762625. More
Length: 2.5 m. Reference no.: 1762625.
€83,20 €68,76 €76,54 €63,26
You save 8%
Thermostat Ø 67 mm, 83 °C Massey Ferguson, Case IH, Steyr
Ø: 67 mm. Temperature: 83 °C. More
Ø: 67 mm. Temperature: 83 °C.
€38,47 €31,79 €35,39 €29,25
You save 8%
Injection nozzle engine 620DSL, 612DS Valtra, Massey Ferguson
€224,74 €185,74 €206,76 €170,88
You save 8%
Cylinder head bolt 12 x 140 mm Massey Ferguson, Case IH, Steyr
Dimensions: M12 x 140 mm. More
Dimensions: M12 x 140 mm.
€15,23 €12,58
Connecting rod bolt 85 mm Valtra-Valmet, Case IH, Steyr
Dimensions: 85 mm long. More
Dimensions: 85 mm long.
€42,51 €35,13 €39,11 €32,32
You save 8%
Cylinder head gasket set upper Case IH, Steyr, New Holland
€231,31 €191,17 €212,81 €175,87
You save 8%
Door lock, left Fendt Farmer 240 S (Typ 294), GT 395
€59,42 €49,11 €54,67 €45,18
You save 8%
Oil pressure switch engine and transmission M10 x 1, 0,15 - 0,45 bar
Version: Thread: M10 x 1 cylindrical, Switching pressure: 0.15 - 0.45 bar, Blade terminal 6.3 mm, AF: 24 mm, Colour: white. Connection: Blade terminal... More
Version: Thread: M10 x 1 cylindrical, Switching pressure: 0.15 - 0.45 ...
€27,39 €22,63
BOSCH Sensor hydraulic pressure lifting height
BOSCH
Version: Lifting height. More
Version: Lifting height.
€370,79 €306,44 €314,26 €259,72
You save 15%
Seal kit hydraulic steering
€226,79 €187,43 €208,65 €172,44
You save 8%
Repair set brake cylinder Valtra-Valmet, Fendt
€39,37 €32,54 €36,22 €29,93
You save 8%
Showing 49 - 96 of 172

Valtra 8150 parts, also sold as the Valmet 8150

Plenty of farmers still call it the Valmet 8150, while later paperwork says Valtra. Either way it is the same tractor from the Mega line, and the Valtra 8150 parts on this page apply to both badges. There are more than 170 of them, from GRANIT, DANA Spicer, Scharmüller, GRAMMER and Walterscheid.

Wear items that show up with age

Hours on the clock mean play in the steering and the odd leak. Ball joints in the steering linkage wear and make the tractor wander on the road. Seal kits, individual seals, gaskets and O-rings keep oil and coolant where they belong, for example around the valve cover. The thermostat decides how quickly the engine warms up, and clutch plates and repair kits are here for when the driveline needs work.

Worn ball joints are easiest to find with a helper. Have someone rock the steering wheel back and forth with the engine running while you hold the joint. Play in the steering or a rattle when you turn the wheel usually means the rod end has worn out and needs replacing. Always secure a new joint with a fresh locknut or split pin.

Seat, cab and electrics

For long days on the 8150 there are air suspended GRAMMER tractor seats. An air seat has its own small compressor and needs a power feed, so check that the cable is present in the cab before you order. You will also find door locks, an alternator, a flasher unit and the stop cable that shuts the engine down. At the rear, ball type drawbars fit, and bolt sets for mounting them are listed too.

A thermostat stuck open shows up as an engine that barely warms up in winter and a cab heater that stays lukewarm. Stuck shut, it sends the temperature gauge climbing instead. If in doubt, test the old one in a pan of water on the stove and watch whether it opens. Always fit a new thermostat with a new gasket and mind which way round it goes, with the small bleed hole at the top.

Making sure it fits

The type plate tells you whether your tractor was sold under the Valmet or the Valtra name and exactly which model it is. Once the old part is off, look for the reference number on it and match it against the product description. With a seal kit or thermostat that simple check saves a second order.

The Mega line also includes the Valtra 8050, Valtra 8550 and Valtra 8400. Each has a page of its own with the parts known to fit, which helps when there is more than one Valtra in the yard. Running another Valtra-Valmet as well? Take a look at Valtra parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart