Menu
EUR

Valtra 8150 tractor parts & technical data

The Valtra 8150, also known as the Valmet 8150, is covered here by more than 170 matching parts, from steering and front axle to electrics and trailer hitches.

172 parts found for Valtra-Valmet 8150
Show:
Water pump without gasket Valtra-Valmet, Massey Ferguson
€255,91 €211,50 €235,44 €194,58
You save 8%
Thermostat Ø 54 mm, 79 °C
Ø: 54 mm. Temperature: 79 °C. More
Ø: 54 mm. Temperature: 79 °C.
€19,81 €16,37
Thermostat Ø 67 mm, 83 °C
Ø: 67 mm. Temperature: 83 °C. More
Ø: 67 mm. Temperature: 83 °C.
€39,55 €32,69 €36,39 €30,07
You save 8%
Optibelt V-belt Massey Ferguson 3120, 5425-5460, 6180, 6445, 6455
€36,11 €29,84 €33,22 €27,46
You save 8%
Feed pump 5 hole, hole spacing 25/37 and 45 mm, flange 52 mm
Version: 5 holes, Vertical hole spacing: 25/37 mm, Horizontal hole spacing: 45 mm, Flange to lever end: 52 mm. Menke no.: 209000. More
Version: 5 holes, Vertical hole spacing: 25/37 mm, Horizontal hole spa...
€44,86 €37,07 €41,27 €34,11
You save 8%
O-clamp set 115 x 3,5 mm Steyr, Massey Ferguson - 3 pieces
Dimensions: All rings 115 x 3.5 mm. More
Dimensions: All rings 115 x 3.5 mm.
€35,00 €28,93 €32,20 €26,61
You save 8%
Door lock, right Fendt Farmer 240 S (Typ 294), GT 395
€56,69 €46,85 €52,15 €43,10
You save 8%
Lift rod Valtra Mezzo 6000-6900, Mega 8000-8550
€273,87 €226,34 €251,96 €208,23
You save 8%
Scharmüller Ball 80® ball inserts gray cast iron, rail width 335 mm, 4000 kg
Scharmüller
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000 kg. D-value: 89,3 kN. Plate height: 160 mm. Colour: AGCO grey. Overh... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.116,48 €922,71
Seal kit Valtra-Valmet C 90 - 150, M 120-150, T 120-190
€90,76 €75,01 €83,50 €69,01
You save 8%
Indicator/position light yellow, white, 170 x 63,5 x 60,3 mm, left / right
Bulb: 12V21WK / P21W, 12V5WK / R5W. Colour: Yellow, white. Width: 170 mm. Form: Rectangular. Height: 53,5 mm. Dimensions W x H x D: 170 x 63,5 x 60,3 ... More
Bulb: 12V21WK / P21W, 12V5WK / R5W. Colour: Yellow, white. Width: 170 ...
€34,72 €28,69 €31,94 €26,40
You save 8%
HELLA Headlight left / right 12 / 24 V, H4, glass 164 x 103 mm, built-in Fendt
HELLA
Bulb: 12V60/55W / H4, 12V4WK / T4W, 24V75/70W / H4, 24V4WK / T4W. Fixing: 3-point mounting. Installation location: Left/right. Nominal voltage: 12 / 2... More
Bulb: 12V60/55W / H4, 12V4WK / T4W, 24V75/70W / H4, 24V4WK / T4W. Fixi...
€107,20 €88,60 €103,23 €85,32
You save 4%
Seal kit hydraulic steering
€353,13 €291,84 €324,88 €268,50
You save 8%
Ball joint 205 mm, M20 x 1,5, M22 x 1,5, taper 23,5 - 26,2 mm
A: 205 mm. C: M20 x 1,5 mm. D: M22 x 1,5 mm. E: 23,5 mm. F: 26,2 mm. Taper: 23,5 - 26,2 mm. More
A: 205 mm. C: M20 x 1,5 mm. D: M22 x 1,5 mm. E: 23,5 mm. F: 26,2 mm. T...
€73,47 €60,72 €67,59 €55,86
You save 8%
Axial joint 205 mm, M22 x 1,5, M22 x 1,5, Ø 56 mm, Ø 40 mm
A: 205 mm. C: M22 x 1,5 mm. D: M22 x 1,5 mm. Ø B: 56 mm. Ø E: 40 mm. More
A: 205 mm. C: M22 x 1,5 mm. D: M22 x 1,5 mm. Ø B: 56 mm. Ø E: 40 mm.
€81,60 €67,44 €75,07 €62,04
You save 8%
Ball joint 220 mm, M22 x 1,5, M22 x 1,5, taper 23,5 - 26,4 mm
A: 220 mm. C: M22 x 1,5 mm. D: M22 x 1,5 mm. E: 23,5 mm. F: 26,4 mm. Taper: 23,5 - 26,4 mm. More
A: 220 mm. C: M22 x 1,5 mm. D: M22 x 1,5 mm. E: 23,5 mm. F: 26,4 mm. T...
€82,92 €68,53 €76,29 €63,05
You save 8%
Universal joint 30,2 x 82 mm, maintenance-free
A: 30,2 mm. B: 82 mm. Universal joint size: . Lubrication system: Maintenance-free. More
A: 30,2 mm. B: 82 mm. Universal joint size: . Lubrication system: Main...
€169,57 €140,14 €156,00 €128,93
You save 8%
Wheel brake cylinder Ø 34,92 mm, DOT 4, with piston rod Steyr 667, 680
Medium: DOT4. Hole Ø: 34.92 mm. Additional information: With piston rod. More
Medium: DOT4. Hole Ø: 34.92 mm. Additional information: With piston r...
€179,36 €148,23 €165,01 €136,37
You save 8%
Hand brake cable 937 mm Valtra-Valmet Mezzo, Mega, HiTech, C
€198,99 €164,45 €183,07 €151,30
You save 8%
Wheel brake cylinder K1, DOT 4 Valtra-Valmet Mezzo 6000-6900
€183,75 €151,86 €169,05 €139,71
You save 8%
Brake disc Ø 224 mm, 27 teeth, thickness 5 mm, 50 km/h, for ceramic
Notes: Please check the rear axle version and take this into account when ordering.. More
Notes: Please check the rear axle version and take this into account w...
€40,13 €33,16
Engine preheater, complete connection Ø 40 mm, press
Connection: Ø 40 mm press fitting. More
Connection: Ø 40 mm press fitting.
€446,33 €368,87 €410,62 €339,36
You save 8%
Piston set complete 3 rings, Ø 108 mm, piston pin Ø 40 x 88,70 mm
Dimensions: 3 rings, Ø 108 mm, Gudgeon pin Ø 40 x 88.70 mm, Combustion chamber Ø 64.50 mm, Combustion chamber depth 19 mm. More
Dimensions: 3 rings, Ø 108 mm, Gudgeon pin Ø 40 x 88.70 mm, Combusti...
€216,10 €178,60 €198,81 €164,31
You save 8%
Radiator filler cap Ø 51 mm, height 25 mm
Neck Ø: 51 mm. Height: 25 mm. More
Neck Ø: 51 mm. Height: 25 mm.
€14,61 €12,08
Optibelt Powerband multi-rib belt 8 ribs Massey Ferguson, New Holland
€69,70 €57,60 €64,12 €53,00
You save 8%
Crankshaft seal for Ø 58 x 80 x 12 mm Massey Ferguson
Outer Ø: 80 mm. Width: 12 mm. Inner Ø: 58 mm. More
Outer Ø: 80 mm. Width: 12 mm. Inner Ø: 58 mm.
€15,49 €12,80
Stop cable 2250 / 2015 mm Valtra-Valmet 205-8600
A: 2250 mm. B: 2015 mm. More
A: 2250 mm. B: 2015 mm.
€34,18 €28,24
Cylinder head gasket engine Sisu
€82,88 €68,50 €76,25 €63,02
You save 8%
Scharmüller Drawbar K50 Cramer, rail 335 mm, pin Ø 22 mm, 31 kN
Scharmüller
Rail width: 335 mm. Guide width: 30 mm. Detent pin Ø: 22 mm. Load capacity: 250 kg. D-value: 31 kN. Overhang: 148 mm. Plate height: 150 mm. Hole: M20... More
Rail width: 335 mm. Guide width: 30 mm. Detent pin Ø: 22 mm. Load cap...
€899,63 €743,50 €871,22 €720,02
You save 3%
Walterscheid Piton Fix rail width 330 mm, locking pin Ø 25 mm, 3000 kg, 89,3 kN
Walterscheid
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000 kg. D-value: 89.3 kN. Colour: Black. Description: This product is a ... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.748,75 €1.445,25 €1.382,58 €1.142,63
You save 21%
Scharmüller Drawbar ball 50 rail 335 mm, pin Ø 22 mm, 250 kg, AGCO gray
Scharmüller
Rail width: 335 mm. Guide width: 30 mm. Detent pin Ø: 22 mm. Load capacity: 250 kg. D-value: 31 kN. Overhang: 168 mm. Plate height: 150 mm. Hole: M20... More
Rail width: 335 mm. Guide width: 30 mm. Detent pin Ø: 22 mm. Load cap...
€839,65 €693,93 €812,85 €671,77
You save 3%
Seal kit Valtra-Valmet C 90 - 150, M 120-150
€92,56 €76,50 €85,16 €70,38
You save 8%
Work lamp flood beam H3, 55 W, 12 V, 150 x 98 x 89 mm
Bulb: H3. Form: Rectangular. Material: Housing: plastic, lens: glass. Dimensions W x H x D: 150 x 98 x 89 mm. Installation location: Left/right. Nomin... More
Bulb: H3. Form: Rectangular. Material: Housing: plastic, lens: glass. ...
€55,15 €45,58 €50,74 €41,93
You save 8%
Carraro Bronze bearing Ø 53 x 48 x 40 mm Massey Ferguson, Case IH, New Holland
Carraro
Outer Ø: 53 mm. Inner Ø: 48 mm. Length: 40 mm. More
Outer Ø: 53 mm. Inner Ø: 48 mm. Length: 40 mm.
€15,23 €12,58
Brake disc Ø 224 mm, 27 teeth, 4,8 mm thick, organic Valtra-Valmet
Dimensions: Ø 224, 4.8 thick, 27 splines mm. More
Dimensions: Ø 224, 4.8 thick, 27 splines mm.
€75,25 €62,19 €69,23 €57,21
You save 8%
Showing 97 - 144 of 172

Valtra 8150 parts, also sold as the Valmet 8150

Plenty of farmers still call it the Valmet 8150, while later paperwork says Valtra. Either way it is the same tractor from the Mega line, and the Valtra 8150 parts on this page apply to both badges. There are more than 170 of them, from GRANIT, DANA Spicer, Scharmüller, GRAMMER and Walterscheid.

Wear items that show up with age

Hours on the clock mean play in the steering and the odd leak. Ball joints in the steering linkage wear and make the tractor wander on the road. Seal kits, individual seals, gaskets and O-rings keep oil and coolant where they belong, for example around the valve cover. The thermostat decides how quickly the engine warms up, and clutch plates and repair kits are here for when the driveline needs work.

Worn ball joints are easiest to find with a helper. Have someone rock the steering wheel back and forth with the engine running while you hold the joint. Play in the steering or a rattle when you turn the wheel usually means the rod end has worn out and needs replacing. Always secure a new joint with a fresh locknut or split pin.

Seat, cab and electrics

For long days on the 8150 there are air suspended GRAMMER tractor seats. An air seat has its own small compressor and needs a power feed, so check that the cable is present in the cab before you order. You will also find door locks, an alternator, a flasher unit and the stop cable that shuts the engine down. At the rear, ball type drawbars fit, and bolt sets for mounting them are listed too.

A thermostat stuck open shows up as an engine that barely warms up in winter and a cab heater that stays lukewarm. Stuck shut, it sends the temperature gauge climbing instead. If in doubt, test the old one in a pan of water on the stove and watch whether it opens. Always fit a new thermostat with a new gasket and mind which way round it goes, with the small bleed hole at the top.

Making sure it fits

The type plate tells you whether your tractor was sold under the Valmet or the Valtra name and exactly which model it is. Once the old part is off, look for the reference number on it and match it against the product description. With a seal kit or thermostat that simple check saves a second order.

The Mega line also includes the Valtra 8050, Valtra 8550 and Valtra 8400. Each has a page of its own with the parts known to fit, which helps when there is more than one Valtra in the yard. Running another Valtra-Valmet as well? Take a look at Valtra parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart