Menu
EUR

Valtra A 75 tractor parts & technical data

More than 100 parts for the Valtra A 75 from the A series on one page, from trailer couplings and electrics to steering and front axle components.

101 parts found for Valtra-Valmet A 75
Show:
GRANIT Ball joint 160 mm, C M20 x 1,5, D M22 x 1,5, taper 23,5 - 26,5 mm
5%
GRANIT
Ball joint 160 mm, C M20 x 1,5, D M22 x 1,5, taper 23,5 - 26,5 mm
A: 160 mm. C: M20 x 1,5 mm. D: M22 x 1,5 mm. E: 23,5 mm. F: 26,5 mm. Taper: 23,5...
€97,24 €80,36 €92,35 €76,32
 
GRAMMER Tractor seat air suspended Maximo Professional fabric, seat width 530 mm
GRAMMER
Tractor seat air suspended Maximo Professional fabric, seat width 530 mm
Super comfort seat with low-frequency air suspension and 12V compressor. APS: au...
€1.941,20 €1.604,30
 
Cobo Flasher unit 12 V, 2+1+1 / 8 x 21 W, 6 connections, with holder
5%
Cobo
Flasher unit 12 V, 2+1+1 / 8 x 21 W, 6 connections, with holder
Version: 12 V / 2 + 1 + 1 x 21 / 8 x 21 W, With bracket, With hazard warning lig...
€55,70 €46,03 €52,90 €43,72
 
Cobo Contact switch mechanical brake light, clutch, PTO shaft, 12 / 24 V
Cobo
Contact switch mechanical brake light, clutch, PTO shaft, 12 / 24 V
Version: For brake light, clutch, four-wheel drive, PTO, 12/24 V, power rating: ...
€39,10 €32,31
 
GRANIT LED work lights spotlight 3600 lm, 36 W, 148 x 95 x 58 mm
10%
GRANIT
LED work lights spotlight 3600 lm, 36 W, 148 x 95 x 58 mm
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs included:...
€78,15 €64,59 €70,70 €58,43
 
Walterscheid Ball hitch K80 330 / 25 / 32 mm, 2800 kg, 97,1 kN
21%
Walterscheid
Ball hitch K80 330 / 25 / 32 mm, 2800 kg, 97,1 kN
Quick height adjustment with rotation lock, load capacity up to 40 km/h 2800 kg,...
€2.124,41 €1.755,71 €1.669,15 €1.379,46
 
Heating element
5%
Heating element
€181,69 €150,16 €172,60 €142,64
 
Axial joint 205 mm, M22 x 1,5, M22 x 1,5, Ø 56 mm, Ø 40 mm
5%
Axial joint 205 mm, M22 x 1,5, M22 x 1,5, Ø 56 mm, Ø 40 mm
A: 205 mm. C: M22 x 1,5 mm. D: M22 x 1,5 mm. Ø B: 56 mm. Ø E: 40 mm.
€78,20 €64,63 €74,25 €61,36
 
Collet set Valtra-Valmet 255-865
Collet set Valtra-Valmet 255-865
€5,45 €4,50
 
Scharmüller Drawbar frame standard 97,1 kN, 330 mm, ball 80
Scharmüller
Drawbar frame standard 97,1 kN, 330 mm, ball 80
Colour: Black | Rail width (mm): 330 | Category: Bearing supports | D-value (kN)...
€3.271,95 €2.704,09
 
DANA Spicer Wheel bolt M18 x 1,5, 60 mm final drive front axle 730
DANA Spicer
Wheel bolt M18 x 1,5, 60 mm final drive front axle 730
Length (mm): 60 | Thread: M18 X 1,5
€15,55 €12,85
 
Walterscheid Drawbar ball 80 rail 330 mm, pin Ø 25 mm, 4000 kg, black
21%
Walterscheid
Drawbar ball 80 rail 330 mm, pin Ø 25 mm, 4000 kg, black
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000...
€2.166,20 €1.790,25 €1.702,00 €1.406,61
 
Wabco Trailer control valve 8 bar, M22 x 1,5, NW 10 mm
5%
Wabco
Trailer control valve 8 bar, M22 x 1,5, NW 10 mm
Working pressure (bar): 8 | Connection: M22 x 1.5 | Nominal width (mm): 10
€586,12 €484,40 €556,80 €460,17
 
Glow plug 12 V, 15,5 A, thread 7/8 inch - 14 UNF
Glow plug 12 V, 15,5 A, thread 7/8 inch - 14 UNF
Version: 12 V, 15.5 A, thread 7/8" - 14 UNF.
€32,40 €26,78
 
Inlet valve engine Sisu 320-620
5%
Inlet valve engine Sisu 320-620
€36,60 €30,25 €34,75 €28,72
 
MAHLE Starter motor 12 V, 3,0 kW, 10 teeth, Ø 89 mm, 254 mm, clockwise
38%
MAHLE
Starter motor 12 V, 3,0 kW, 10 teeth, Ø 89 mm, 254 mm, clockwise
€489,63 €404,65 €306,00 €252,89
 
GRANIT Oil drain valve M18 x 1,5
5%
GRANIT
Oil drain valve M18 x 1,5
Thread: M18 x 1.5.
€65,32 €53,98 €62,00 €51,24
 
Door lock, left Massey Ferguson, Case IH, Steyr
5%
Door lock, left Massey Ferguson, Case IH, Steyr
€47,50 €39,26 €45,10 €37,27
 
Walterscheid Piton Fix rail width 330 mm, locking pin Ø 25 mm, 3000 kg, 89,3 kN
18%
Walterscheid
Piton Fix rail width 330 mm, locking pin Ø 25 mm, 3000 kg, 89,3 kN
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000...
€1.675,85 €1.385,00 €1.382,55 €1.142,60
 
Walterscheid Drawbar manual rail width 330 mm, coupling pin 31 mm, 92 kN
18%
Walterscheid
Drawbar manual rail width 330 mm, coupling pin 31 mm, 92 kN
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 31 ...
€1.058,75 €875,00 €873,45 €721,86
 
Walterscheid Adapter plate rail width 330 mm, hole pattern 160 x 100 mm, M21
21%
Walterscheid
Adapter plate rail width 330 mm, hole pattern 160 x 100 mm, M21
Guide width (mm): 32 | Description: The coupling plate is a height-adjustable sl...
€1.214,60 €1.003,80 €954,30 €788,68
 
Scharmüller Drawbar frame rail 330 mm, guide 32 mm, 112 kN, 1000 kg
Scharmüller
Drawbar frame rail 330 mm, guide 32 mm, 112 kN, 1000 kg
Version: Lang | Rail width (mm): 330 | Category: Lagerböcke | Colour: Schwarz | ...
€1.287,16 €1.063,77
 
GRANIT Track rod 280 mm, M20 x 1,5, taper 23,6 - 26,6 mm Valtra A72 - A95
5%
GRANIT
Track rod 280 mm, M20 x 1,5, taper 23,6 - 26,6 mm Valtra A72 - A95
A (mm): 280 | D (mm): M22 x 1,5 | E (mm): 23,6 | F (mm): 26,6 | Taper (mm): 23,6...
€159,64 €131,93 €151,65 €125,33
 
SANDEN Aircon compressor SD7H15 12 V, pulley Ø 132 mm, 2 grooves Valtra-Valmet
5%
SANDEN
Aircon compressor SD7H15 12 V, pulley Ø 132 mm, 2 grooves Valtra-Valmet
Oil quantity (ccm): 135 | Suitable oil: SP - 10 | Refrigerant: R 134a | Connecti...
€562,03 €464,49 €533,90 €441,24
 
Showing 1 - 24 of 101

Valtra A 75 parts

The Valtra A 75 is a tractor most owners still service themselves, and the parts on this page reflect that kind of work. More than 100 of them fit this model, from GRANIT and from manufacturers such as DANA Spicer, Walterscheid, Scharmüller and GRAMMER.

Cooling and engine

Water pumps are listed together with their gaskets. On the engine side there are valve cover gaskets, seals for the valve cover, crankshaft seals, O-rings for the feed pump and a gasket between the exhaust silencer and the turbocharger. Alternators complete this group.

When a crankshaft seal starts to weep, look closely at the shaft before fitting the new one. If the old lip has worn a groove into the running surface, a new seal sitting in that same groove will not last. Drive the new seal in square with a suitable drift, oil the lip lightly and make sure it does not fold back on fitting. For the water pump, a new gasket and fresh coolant go with every replacement, and the system needs bleeding with the engine warm.

Hitch, steering, cab and lights

  • Drawbar frames and drawbars with ball, from makers including Scharmüller and Walterscheid.
  • Ball joints for the steering linkage.
  • Door locks and tractor seats, with GRAMMER among the seat brands.
  • Work lamps, indicator and position lights and flasher units.

If the battery is not charging properly, the alternator is not automatically to blame. Measure the charging voltage with the engine running and check the belt, the earth strap and the plug connections first. And when a tractor seat sags or rocks, the cause usually sits in the suspension or the slide rails underneath rather than in the cushion, so look there before replacing the whole seat.

Getting the right part for your A 75

The A 75 is part of the Valtra A series. Confirm the model on the type plate, then look for a stamped or printed number on the part you are replacing. Water pumps usually carry it on the housing, alternators on a small plate at the back. Door locks, ball joints and lights also come in left and right versions, so note the side before ordering.

Other tractors in the A series have their own pages, which saves time if your fleet includes more than one of them:

For any other model of the brand, start at Valtra parts, where every type with replacement parts available is listed.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart