Menu
EUR

Valtra M 150 tractor parts & technical data

What fits a Valtra M 150? This page answers that with more than 120 parts, including trailer couplings, electrics and steering and front axle parts.

114 parts found for Valtra-Valmet M 150
Show:
Scharmüller Adapter plate rail width 335 mm, hole pattern 140 x 80 mm, M20
Scharmüller
Adapter plate rail width 335 mm, hole pattern 140 x 80 mm, M20
Load capacity: 3000 kg. D-value: 89,3 kN. Rail width: 335 mm. Hole pattern: 140 ...
€638,19 €527,43
 
LED headlight dipped beam / main beam 12 / 24 V, 167 x 107 x 78 mm
8%
LED headlight dipped beam / main beam 12 / 24 V, 167 x 107 x 78 mm
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs included:...
€124,12 €102,58 €114,19 €94,37
 
DANA Spicer Plug front axle 745
DANA Spicer
Plug front axle 745
€20,26 €16,75
 
Scharmüller Drawbar frame prepared for drawbar 71,9 kN, 2000 kg, rail 335 mm
4%
Scharmüller
Drawbar frame prepared for drawbar 71,9 kN, 2000 kg, rail 335 mm
Version: Prepared for drawbar | Detent pin Ø (mm): 22 | Load capacity (kg): 2000...
€1.275,80 €1.054,38 €1.223,74 €1.011,36
 
Wabco Trailer control valve 8 bar, M22 x 1,5, NW 10 mm
8%
Wabco
Trailer control valve 8 bar, M22 x 1,5, NW 10 mm
Working pressure (bar): 8 | Connection: M22 x 1.5 | Nominal width (mm): 10
€630,05 €520,70 €579,65 €479,05
 
Start switch 12 V, Ø 16,5 mm, lock K 11-2 keys
Start switch 12 V, Ø 16,5 mm, lock K 11-2 keys
Version: 12 V, with 4 blade terminal connections, Switch positions: 0: off, 1: c...
€16,13 €13,33
 
Gear wheel main shaft 31 teeth Valtra-Valmet
8%
Gear wheel main shaft 31 teeth Valtra-Valmet
Number of teeth: 31.
€423,24 €349,79 €389,38 €321,80
 
Cobo Contact switch mechanical brake light, clutch, PTO shaft, 12 / 24 V
8%
Cobo
Contact switch mechanical brake light, clutch, PTO shaft, 12 / 24 V
Version: For brake light, clutch, four-wheel drive, PTO, 12/24 V, power rating: ...
€32,65 €26,98 €30,04 €24,82
 
Scharmüller Support plate Piton Fix manual, 445 x 220 x 40 mm, 3 ton, AGCO gray
8%
Scharmüller
Support plate Piton Fix manual, 445 x 220 x 40 mm, 3 ton, AGCO gray
D-value (kN): 71,9 | Category: Support plates | Lock: Piton Fix manual | Version...
€987,09 €815,78 €908,12 €750,51
 
Wiper motor Massey Ferguson, Valtra-Valmet
8%
Wiper motor Massey Ferguson, Valtra-Valmet
€223,30 €184,55 €205,44 €169,78
 
Filter dryer Ø 76 mm, 228 mm, connection thread M
8%
Filter dryer Ø 76 mm, 228 mm, connection thread M
Outer Ø (mm): 76 | Connection: O-ring A = male thread 3/8"" - 18UNF O-ring B = m...
€63,79 €52,72 €58,69 €48,50
 
Expansion valve airco 1/2 inch o-ring, 35 g
8%
Expansion valve airco 1/2 inch o-ring, 35 g
Weight (g): 35 | Equipment: O-ring | Connection thread A: # 8, 1/2"" O-ring | Co...
€54,07 €44,69 €49,74 €41,11
 
Gear wheel planetary set rear axle 82 teeth Valtra-Valmet
8%
Gear wheel planetary set rear axle 82 teeth Valtra-Valmet
Number of teeth: 82.
€894,96 €739,64 €823,36 €680,47
 
Cobo Flasher unit 12 V, 2+1+1 / 8 x 21 W, 6 connections, with holder
8%
Cobo
Flasher unit 12 V, 2+1+1 / 8 x 21 W, 6 connections, with holder
Version: 12 V / 2 + 1 + 1 x 21 / 8 x 21 W, With bracket, With hazard warning lig...
€58,12 €48,03 €53,47 €44,19
 
Scharmüller Drawbar ball 50, rail 200 mm, pin Ø 16 mm, 150 kg
8%
Scharmüller
Drawbar ball 50, rail 200 mm, pin Ø 16 mm, 150 kg
Rail width: 200 mm. Guide width: 25 mm. Detent pin Ø: 16 mm. Load capacity: 150 ...
€583,34 €482,10 €536,67 €443,53
 
LUK Torsion damper Valtra-Valmet C90 - C150, M120 - M150, N82 - N142
8%
LUK
Torsion damper Valtra-Valmet C90 - C150, M120 - M150, N82 - N142
€801,39 €662,31 €737,28 €609,32
 
MAHLE Alternator 14 V, 120 A, flange 56 mm, compact, dust-tight
40%
MAHLE
Alternator 14 V, 120 A, flange 56 mm, compact, dust-tight
Direction of rotation: ↻ | Installation angle (°): l 30 | Pulley Ø (mm): - | Add...
€388,90 €321,41 €232,93 €192,50
 
SANDEN Aircon compressor SD7H15 12 V, pulley Ø 132 mm, 2 grooves Valtra-Valmet
8%
SANDEN
Aircon compressor SD7H15 12 V, pulley Ø 132 mm, 2 grooves Valtra-Valmet
Oil quantity (ccm): 135 | Suitable oil: SP - 10 | Refrigerant: R 134a | Connecti...
€586,48 €484,69 €539,56 €445,92
 
Clutches set 7+7 Valtra-Valmet 6250 - 8950, C90 - XM150
8%
Clutches set 7+7 Valtra-Valmet 6250 - 8950, C90 - XM150
€171,21 €141,50 €157,51 €130,18
 
DANA Spicer Wheel hub final drive front axle 730
DANA Spicer
Wheel hub final drive front axle 730
€408,30 €337,44
 
DANA Spicer Hollow wheel carrier final drive front axle 212, 5,22 kg
DANA Spicer
Hollow wheel carrier final drive front axle 212, 5,22 kg
€513,07 €424,03
 
Alternator 14 V, 120 A, flange 56 mm, Fendt, Valtra-Valmet
8%
Alternator 14 V, 120 A, flange 56 mm, Fendt, Valtra-Valmet
Pulley spacing (mm): - | Form: B | Additional information: Compact alternator, d...
€275,46 €227,65 €253,42 €209,44
 
Clutches set 9+9 Valtra-Valmet 6250 - 8950, C90 - XM150
8%
Clutches set 9+9 Valtra-Valmet 6250 - 8950, C90 - XM150
€230,48 €190,48 €212,04 €175,24
 
DANA Spicer King pin final drive front axle 755
8%
DANA Spicer
King pin final drive front axle 755
€114,51 €94,64 €105,35 €87,07
 
DANA Spicer Differential bevel gear final drive front axle 730
8%
DANA Spicer
Differential bevel gear final drive front axle 730
€244,50 €202,07 €224,94 €185,90
 
MAHLE Gear reduction starter 3,2 kW, 11 teeth clockwise, 204,3 mm, Ø 89 mm
40%
MAHLE
Gear reduction starter 3,2 kW, 11 teeth clockwise, 204,3 mm, Ø 89 mm
€548,46 €453,27 €328,50 €271,49
 
Master brake cylinder K1, DOT 4, Valtra-Valmet, Case IH
8%
Master brake cylinder K1, DOT 4, Valtra-Valmet, Case IH
Description: K1.
€137,83 €113,91 €126,80 €104,80
 
Scharmüller Drawbar frame 10 kN, rail width 200 mm, nose weight 350 kg
8%
Scharmüller
Drawbar frame 10 kN, rail width 200 mm, nose weight 350 kg
Version: Standard | Category: Bearing supports | Guide width (mm): 25 | Rail wid...
€668,46 €552,45 €614,98 €508,25
 
PTO shaft end piece 1 3/8 inch, 6 splines Valtra-Valmet
8%
PTO shaft end piece 1 3/8 inch, 6 splines Valtra-Valmet
Version: 1 3/8"", 6 grooves
€206,82 €170,93 €190,27 €157,25
 
CARLISLE External plate Hi-Lo 1,5 mm, inner 98,9 mm, outer 142,5 mm, 6 teeth
CARLISLE
External plate Hi-Lo 1,5 mm, inner 98,9 mm, outer 142,5 mm, 6 teeth
Version: thickness = 1,5 mm inner = 98,9 mm outer = 142,5 mm 6 teeth
€17,19 €14,20
 
DANA Spicer O-ring as front axle 745, 4 g
DANA Spicer
O-ring as front axle 745, 4 g
€17,60 €14,55
 
DANA Spicer Spacer as front axle 745, outer-Ø 150 mm, inner-Ø 120 mm, 1 mm
8%
DANA Spicer
Spacer as front axle 745, outer-Ø 150 mm, inner-Ø 120 mm, 1 mm
Thickness (mm): 1 | Outer Ø (mm): 150 | Inner Ø (mm): 120
€46,81 €38,69 €43,07 €35,59
 
DANA Spicer Intermediate bush as front axle 745, 120 x 127 x 40 mm
8%
DANA Spicer
Intermediate bush as front axle 745, 120 x 127 x 40 mm
Dimensions (mm): 120 x 127 x 40 | Inner Ø (mm): 120 | Height (mm): 40 | Outer Ø ...
€140,42 €116,05 €129,19 €106,77
 
HELLA Alternator 14 V, 120 A Fendt, Valtra-Valmet
23%
HELLA
Alternator 14 V, 120 A Fendt, Valtra-Valmet
Nominal values (V / A): 14 / 120 | Charging current (A): 120 | Nominal voltage (...
€554,78 €458,50 €427,45 €353,26
 
Clutch plate set omkeerinrichting Valtra-Valmet
8%
Clutch plate set omkeerinrichting Valtra-Valmet
€486,96 €402,45 €448,00 €370,25
 
MAHLE Starter motor 12 V, 3,0 kW, 10 teeth, Ø 89 mm, 254 mm, clockwise
40%
MAHLE
Starter motor 12 V, 3,0 kW, 10 teeth, Ø 89 mm, 254 mm, clockwise
€510,93 €422,26 €306,01 €252,90
 
Scharmüller Pick-Up Hitch einsätze 80 shank 60 x 80 mm, 417 mm, bore 26 mm
8%
Scharmüller
Pick-Up Hitch einsätze 80 shank 60 x 80 mm, 417 mm, bore 26 mm
suitable for: Valtra. Series: C-Serie. Category: Pick-up hitch. Version: ball 80...
€1.428,29 €1.180,41 €1.314,03 €1.085,97
 
LED work lights spotlight 3600 lm, 36 W, 148 x 95 x 58 mm
8%
LED work lights spotlight 3600 lm, 36 W, 148 x 95 x 58 mm
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs included:...
€77,66 €64,18 €71,45 €59,05
 
Flasher unit 12 V, 2+1+1 x 21 W, with holder and indicator instruments
8%
Flasher unit 12 V, 2+1+1 x 21 W, with holder and indicator instruments
To fit as: Case IH 238, 248, 258, 268, 278, 288, 323, 354, 374, 384, 444, 474, 4...
€48,67 €40,22 €44,78 €37,01
 
Aircon compressor 12 V, pulley Ø 132 mm, 2 grooves, 135 ccm oil
8%
Aircon compressor 12 V, pulley Ø 132 mm, 2 grooves, 135 ccm oil
Reference no.: QP7H15-8024 | Suitable oil: PAG 46 | For compressor: 7H15 | Nomin...
€357,93 €295,81 €329,30 €272,15
 
DANA Spicer Sealing ring final drive front axle 755, 40 x 65 x 18 mm
8%
DANA Spicer
Sealing ring final drive front axle 755, 40 x 65 x 18 mm
Dimensions (mm): 40 x 65 x 18
€33,83 €27,96 €31,12 €25,72
 
Ball joint 260 mm, taper 24 - 26 mm, M20 x 1,5 / M24 x 1,5
8%
Ball joint 260 mm, taper 24 - 26 mm, M20 x 1,5 / M24 x 1,5
A: 260 mm. C: M20 x 1,5 mm. D: M24 x 1,5 mm. E: 24 mm. F: 26 mm. Taper: 24 - 26 ...
€82,15 €67,89 €75,58 €62,46
 
Showing 1 - 48 of 114

Valtra M 150 parts

The Valtra M 150 from the M series is a tractor that contractors and larger dairy farms run all year round. More than 120 parts fit it, from GRANIT, Scharmüller, DANA Spicer, Walterscheid and Cobo.

Lights and indicators

There are headlights, work lamps and LED headlights with dipped and main beam. A flasher unit with holder and indicator warning is listed too. If you are switching to LED lights, be aware that a standard flasher unit often reads the lower current draw of LED lamps as a failed bulb and starts flashing fast. In that case, fit a flasher that is rated for LED.

Ball hitch and drawbar

For heavy haulage there are ball drawbars, separate ball inserts and adapter plates. On a ball hitch, the ball is what wears first. Check it with a caliper from time to time and make sure the hold down still closes firmly. If you can feel play between ball and drawbar eye, replace the ball insert before the rest of the hitch starts to suffer.

Engine and sealing

Engine parts include a thermostat, an engine speed sensor and a crankshaft seal. Sealing rings, oil O-rings, seal kits and an exhaust seal for the turbocharger manifold are also listed. For the cab there is a door lock.

An engine speed sensor that throws fault codes is not always faulty. Take it out and look at the tip. If it is coated with metal swarf or oily sludge, clean it and refit it with the correct gap to the toothed wheel. Only if the fault returns is replacement the next step. A new thermostat always gets a new seal, and after refilling you let the engine warm up with the heater open so the air can escape from the cooling system.

A door lock that sticks or no longer latches is a familiar annoyance in the cab. If the spring or the mechanism is worn, replace the lock as a whole, since piecemeal repairs rarely last. Fit the crankshaft seal with the lip facing the oil and check that the running surface on the crankshaft is smooth.

Checking your tractor

In our shop the M 150 appears under the brand name Valtra-Valmet. The serial plate confirms that the tractor is this model and not another one from the M series. If the old part has a number on it, compare it with the reference number listed with the product, which is the safest check for seals.

All other models from the brand are on Valtra parts, each with a page of its own.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart