Menu
EUR

Valtra N 113 tractor parts & technical data

Got a Valtra N 113 from the N3 series in the yard? Find more than 100 parts here, such as trailer couplings, electrics, and steering and front axle parts.

110 parts found for Valtra-Valmet N 113
Show:
Thermostat Ø 67 mm, 83 °C Massey Ferguson, Case IH, Steyr
Ø: 67 mm. Temperature: 83 °C. More
Ø: 67 mm. Temperature: 83 °C.
€36,87 €30,47 €35,00 €28,93
You save 5%
Cylinder head gasket engine Sisu 420
€146,11 €120,75 €138,80 €114,71
You save 5%
Door lock, right Fendt Farmer 240 S (Typ 294), GT 395
€54,33 €44,90 €51,60 €42,64
You save 5%
Scharmüller Drawbar K80 manual, rail 335 mm, pin Ø 22 mm, 3000 kg, AGCO gray
Scharmüller
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 3000 kg. D-value: 89,3 kN. Plate height: 150 mm. Colour: AGCO grey. Overh... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.294,08 €1.069,49 €1.089,95 €900,79
You save 16%
Scharmüller Ball 80® ball inserts gray cast iron, rail width 335 mm, 4000 kg
Scharmüller
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000 kg. D-value: 89,3 kN. Plate height: 160 mm. Colour: AGCO grey. Overh... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.221,12 €1.009,19 €1.028,50 €850,00
You save 16%
BOSCH Sensor hydraulic pressure lifting height
BOSCH
Version: Lifting height. More
Version: Lifting height.
€355,33 €293,66 €314,26 €259,72
You save 12%
FLEETGUARD Hydraulic oil filter HF35322
€99,05 €81,86 €89,60 €74,05
You save 10%
DANA Spicer Spacer as front axle 745, outer-Ø 150 mm, inner-Ø 120 mm, 1 mm
DANA Spicer
Thickness (mm): 1 | Outer Ø (mm): 150 | Inner Ø (mm): 120 More
Thickness (mm): 1 | Outer Ø (mm): 150 | Inner Ø (mm): 120
€44,85 €37,07 €42,60 €35,21
You save 5%
Starter ring gear Ø 405/373 mm, 133 teeth Valtra-Valmet
Version: Ø 405/373 mm, 133 teeth. More
Version: Ø 405/373 mm, 133 teeth.
€215,16 €177,82 €204,40 €168,93
You save 5%
Borg Warner Fan clutch M30 x 2 L, Ø 152,4 mm Valtra-Valmet
Borg Warner
Thread: M30 x 2 L. PCD: 152,4 mm. More
Thread: M30 x 2 L. PCD: 152,4 mm.
€615,55 €508,72
Door lock, right Massey Ferguson, Case IH, Steyr
€47,50 €39,26 €45,10 €37,27
You save 5%
Scharmüller Support plate Piton Fix manual, 445 x 220 x 40 mm, 3 ton, AGCO gray
Scharmüller
D-value (kN): 71,9 | Category: Support plates | Lock: Piton Fix manual | Version: Standard | Colour: AGCO grey | Load capacity (t): 3 | Length (mm): 4... More
D-value (kN): 71,9 | Category: Support plates | Lock: Piton Fix manual...
€950,65 €785,66
Scharmüller Drawbar frame 10 kN, rail width 200 mm, nose weight 350 kg
Scharmüller
Version: Standard | Category: Bearing supports | Guide width (mm): 25 | Rail width (mm): 200 | D-value (kN): 10 | Colour: Black | Detent pin Ø (mm): ... More
Version: Standard | Category: Bearing supports | Guide width (mm): 25 ...
€643,75 €532,02
Wiper motor Massey Ferguson, Valtra-Valmet
€213,99 €176,85 €203,25 €167,98
You save 5%
CARLISLE External plate Hi-Lo 1,5 mm, inner 98,9 mm, outer 142,5 mm, 6 teeth
CARLISLE
Version: thickness = 1,5 mm inner = 98,9 mm outer = 142,5 mm 6 teeth More
Version: thickness = 1,5 mm inner = 98,9 mm outer = 142,5 mm 6 teeth
€13,18 €10,89 €12,50 €10,33
You save 5%
DANA Spicer Differential bevel gear final drive front axle 730
€234,30 €193,64 €222,55 €183,93
You save 5%
DANA Spicer Guard plate differential front axle 745
DANA Spicer O-ring as front axle 745, 4 g
€16,85 €13,93
Showing 25 - 48 of 110

Valtra N 113 parts

Once a Valtra N 113 has racked up serious hours, the hitch, the driveline and the cooling system are where the work starts. There are more than 100 replacement parts that fit it, from GRANIT, DANA Spicer, Scharmüller, Walterscheid and BOSCH.

Hitching up

At the rear there are ball type drawbars and separate ball inserts from Scharmüller. A ball hitch wears on the top surface where the trailer eye bears down, so check it regularly and replace the insert before the coupling starts to knock. For the cab there is a door lock, and for working after dark a work lamp.

Driveline

Transmission parts include clutch sets, gear wheels, adapter plates and differential bevel gears, along with a gear reduction starter. Differential bevel gears and planet pinions wear as a group. If one gear shows pitting or chipped teeth, inspect its partners and the thrust washers too.

Cooling and engine

  • thermostats
  • a fan clutch and an electric cooling fan
  • temperature sensors
  • seals, such as the exhaust manifold seal at the turbocharger
  • O-rings, for instance for the oil filler cap

A slipping fan clutch lets the fan lag behind and the engine runs hot under load. Spin the fan by hand while the engine is still cold and it should resist noticeably. If it spins freely or there is oil around the clutch, replace it.

With the electric cooling fan, check the fuse and the plug before anything else. If the fan feels rough when turned by hand or makes noise, its motor is worn and a new fan is the answer. Replacement adapter plates and gear wheels are easiest to match using the number stamped on the old part.

A gear reduction starter that only clicks is not always faulty itself. Check the battery, the earth strap and the solenoid terminal before replacing it, since a poor connection gives the same symptom. If the door lock no longer catches, the lock is usually to blame rather than the door. After fitting a new one, adjust the striker so the door closes without force and does not rattle. A work lamp that keeps failing from vibration needs a firm bracket and a clean earth connection.

Choosing correctly

The serial number is on the type plate of the N 113. When in doubt, go by the number on the old part, on the starter or fan clutch for example, and search the shop with it. The other tractors in the N series each have a separate page:

All Valtra tractors are listed under Valtra parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart