Menu
EUR

Valtra N 92 tractor parts & technical data

Working with a Valtra N 92? Here are more than 110 parts for this N2 series model, including trailer couplings, lighting and steering components.

113 parts found for Valtra-Valmet N 92
Show:
HELLA Alternator 14 V, 120 A Fendt, Valtra-Valmet
20%
HELLA
Alternator 14 V, 120 A Fendt, Valtra-Valmet
Nominal values (V / A): 14 / 120 | Charging current (A): 120 | Nominal voltage (...
€531,65 €439,38 €427,40 €353,22
 
Scharmüller Pick-Up Hitch einsätze 80 shank 60 x 80 mm, 417 mm, bore 26 mm
Scharmüller
Pick-Up Hitch einsätze 80 shank 60 x 80 mm, 417 mm, bore 26 mm
suitable for: Valtra. Series: C-Serie. Category: Pick-up hitch. Version: ball 80...
€1.375,55 €1.136,82
 
Door lock, right Fendt Farmer 240 S (Typ 294), GT 395
5%
Door lock, right Fendt Farmer 240 S (Typ 294), GT 395
€54,33 €44,90 €51,60 €42,64
 
Scharmüller Ball 80® ball inserts gray cast iron, rail width 335 mm, 4000 kg
16%
Scharmüller
Ball 80® ball inserts gray cast iron, rail width 335 mm, 4000 kg
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000...
€1.221,12 €1.009,19 €1.028,50 €850,00
 
BOSCH Sensor hydraulic pressure lifting height
12%
BOSCH
Sensor hydraulic pressure lifting height
Version: Lifting height.
€355,33 €293,66 €314,26 €259,72
 
DANA Spicer Spacer as front axle 745, outer-Ø 150 mm, inner-Ø 120 mm, 1 mm
5%
DANA Spicer
Spacer as front axle 745, outer-Ø 150 mm, inner-Ø 120 mm, 1 mm
Thickness (mm): 1 | Outer Ø (mm): 150 | Inner Ø (mm): 120
€44,85 €37,07 €42,60 €35,21
 
GRANIT Wheel brake cylinder K1, DOT 4 Valtra-Valmet Mezzo 6000-6900
5%
GRANIT
Wheel brake cylinder K1, DOT 4 Valtra-Valmet Mezzo 6000-6900
Description: K1.
€176,09 €145,53 €167,25 €138,22
 
Seal thermostat Valtra-Valmet
Seal thermostat Valtra-Valmet
€4,38 €3,62
 
Thermostat Ø 67 mm, 83 °C Massey Ferguson, Case IH, Steyr
5%
Thermostat Ø 67 mm, 83 °C Massey Ferguson, Case IH, Steyr
Ø: 67 mm. Temperature: 83 °C.
€36,87 €30,47 €35,00 €28,93
 
GRANIT Water pump gasket Massey Ferguson, Fendt
GRANIT
Water pump gasket Massey Ferguson, Fendt
€6,50 €5,37
 
Crankshaft seal for Ø 58 x 80 x 12 mm Massey Ferguson
Crankshaft seal for Ø 58 x 80 x 12 mm Massey Ferguson
Outer Ø: 80 mm. Width: 12 mm. Inner Ø: 58 mm.
€14,80 €12,23
 
Cylinder head gasket engine Sisu 420
5%
Cylinder head gasket engine Sisu 420
€146,11 €120,75 €138,80 €114,71
 
Scharmüller Drawbar ball 50, rail 200 mm, pin Ø 16 mm, 150 kg
Scharmüller
Drawbar ball 50, rail 200 mm, pin Ø 16 mm, 150 kg
Rail width: 200 mm. Guide width: 25 mm. Detent pin Ø: 16 mm. Load capacity: 150 ...
€561,80 €464,30
 
Scharmüller Drawbar K80 manual, rail 335 mm, pin Ø 22 mm, 3000 kg, AGCO gray
16%
Scharmüller
Drawbar K80 manual, rail 335 mm, pin Ø 22 mm, 3000 kg, AGCO gray
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 3000...
€1.294,08 €1.069,49 €1.089,95 €900,79
 
GRANIT Oil pressure switch engine and transmission M10 x 1, 0,15 - 0,45 bar
GRANIT
Oil pressure switch engine and transmission M10 x 1, 0,15 - 0,45 bar
Version: Thread: M10 x 1 cylindrical, Switching pressure: 0.15 - 0.45 bar, Blade...
€26,20 €21,65
 
FLEETGUARD Hydraulic oil filter HF35322
10%
FLEETGUARD
Hydraulic oil filter HF35322
€99,05 €81,86 €89,60 €74,05
 
Scharmüller Support plate Piton Fix manual, 445 x 220 x 40 mm, 3 ton, AGCO gray
Scharmüller
Support plate Piton Fix manual, 445 x 220 x 40 mm, 3 ton, AGCO gray
D-value (kN): 71,9 | Category: Support plates | Lock: Piton Fix manual | Version...
€950,65 €785,66
 
Scharmüller Drawbar frame 10 kN, rail width 200 mm, nose weight 350 kg
Scharmüller
Drawbar frame 10 kN, rail width 200 mm, nose weight 350 kg
Version: Standard | Category: Bearing supports | Guide width (mm): 25 | Rail wid...
€643,75 €532,02
 
CARLISLE External plate Hi-Lo 1,5 mm, inner 98,9 mm, outer 142,5 mm, 6 teeth
5%
CARLISLE
External plate Hi-Lo 1,5 mm, inner 98,9 mm, outer 142,5 mm, 6 teeth
Version: thickness = 1,5 mm inner = 98,9 mm outer = 142,5 mm 6 teeth
€13,18 €10,89 €12,50 €10,33
 
Aircon compressor 12 V, Ø 132 mm, 2 grooves, 210 ccm
5%
Aircon compressor 12 V, Ø 132 mm, 2 grooves, 210 ccm
No. of grooves: 2 | Nominal voltage (V): 12 | Connection: 7/8"" x 3/4"", vertica...
€409,17 €338,16 €388,70 €321,24
 
DANA Spicer Plug front axle 745
DANA Spicer
Plug front axle 745
€19,40 €16,03
 
GRANIT Master brake cylinder K1, DOT 4, Valtra-Valmet A 83 - T 152
5%
GRANIT
Master brake cylinder K1, DOT 4, Valtra-Valmet A 83 - T 152
€284,11 €234,80 €269,90 €223,06
 
Starter ring gear Ø 405/373 mm, 133 teeth Valtra-Valmet
5%
Starter ring gear Ø 405/373 mm, 133 teeth Valtra-Valmet
Version: Ø 405/373 mm, 133 teeth.
€215,16 €177,82 €204,40 €168,93
 
Showing 25 - 48 of 113

Valtra N 92 parts for turbo, cylinder head and lighting

A whistle under acceleration or blue smoke from the exhaust on an N 92 usually points to the turbo or the manifold. Before changing the turbo, inspect the intake side too, because anything drawn in will damage a new unit just as quickly. This page lists more than 110 Valtra N 92 parts, new parts from GRANIT, Scharmüller, DANA Spicer, Walterscheid and Cobo.

Turbocharger and exhaust manifold

There are remanufactured turbochargers, exhaust manifold seals for the turbo connection and manifold gaskets. Before the first start, prime a new turbo by filling it with clean engine oil through the oil feed, then let the engine idle for a few seconds without touching the throttle. That way the shaft never spins dry. Check the oil feed and return pipes for dirt and kinks too, because a blocked line is a common reason the old turbo failed in the first place.

Cylinder head and engine seals

Cylinder head bolts, crankshaft seals, feed pump O-rings, sealing rings and thermostats complete the engine group. If the head comes off, fit new head bolts and tighten them in stages in a crosswise pattern. They stretch when tightened and will not give the same clamping force a second time. A thermostat always goes back with a clean gasket face and the right way round.

Lighting, cab and towing

Headlights, LED headlights for dipped and main beam, and work lamps keep visibility good. A flasher unit with holder sorts out indicator problems, provided the bulbs themselves are fine. Door locks cover the cab, and for towing there are drawbars with a ball and separate balls for the rail.

After replacing a headlight, aim it against a wall so you do not dazzle oncoming traffic. A stiff door lock works far more smoothly if you grease the lock and striker when fitting the new one. Keep the hitch ball lightly greased too, which also reduces wear on the trailer eye.

Making sure it fits your N 92

Check the type plate to confirm you have an N 92. With a turbo, the number on the turbo's own label is what matters, so compare that with the details shown with the item. For gaskets, compare the bolt pattern with the old one.

Two other models from the N range have their own pages with matching parts: the Valtra N 122 and the Valtra N 142. Any other Valtra model can be reached through Valtra parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart