Menu
EUR

Valtra N 92 tractor parts & technical data

Working with a Valtra N 92? Here are more than 110 parts for this N2 series model, including trailer couplings, lighting and steering components.

113 parts found for Valtra-Valmet N 92
Show:
Scharmüller Adapter plate rail width 335 mm, hole pattern 140 x 80 mm, M20
Scharmüller
Adapter plate rail width 335 mm, hole pattern 140 x 80 mm, M20
Load capacity: 3000 kg. D-value: 89,3 kN. Rail width: 335 mm. Hole pattern: 140 ...
€638,19 €527,43
 
LED headlight dipped beam / main beam 12 / 24 V, 167 x 107 x 78 mm
8%
LED headlight dipped beam / main beam 12 / 24 V, 167 x 107 x 78 mm
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs included:...
€124,12 €102,58 €114,19 €94,37
 
Walterscheid Drawbar manual rail width 330 mm, coupling pin 31 mm, 92 kN
21%
Walterscheid
Drawbar manual rail width 330 mm, coupling pin 31 mm, 92 kN
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 31 ...
€1.104,81 €913,07 €873,47 €721,88
 
DANA Spicer Plug front axle 745
DANA Spicer
Plug front axle 745
€20,26 €16,75
 
Scharmüller Drawbar frame prepared for drawbar 71,9 kN, 2000 kg, rail 335 mm
4%
Scharmüller
Drawbar frame prepared for drawbar 71,9 kN, 2000 kg, rail 335 mm
Version: Prepared for drawbar | Detent pin Ø (mm): 22 | Load capacity (kg): 2000...
€1.275,80 €1.054,38 €1.223,74 €1.011,36
 
Wabco Trailer control valve 8 bar, M22 x 1,5, NW 10 mm
8%
Wabco
Trailer control valve 8 bar, M22 x 1,5, NW 10 mm
Working pressure (bar): 8 | Connection: M22 x 1.5 | Nominal width (mm): 10
€630,05 €520,70 €579,65 €479,05
 
Start switch 12 V, Ø 16,5 mm, lock K 11-2 keys
Start switch 12 V, Ø 16,5 mm, lock K 11-2 keys
Version: 12 V, with 4 blade terminal connections, Switch positions: 0: off, 1: c...
€16,13 €13,33
 
Walterscheid Ball hitch K80 330 / 25 / 32 mm, 2800 kg, 97,1 kN
19%
Walterscheid
Ball hitch K80 330 / 25 / 32 mm, 2800 kg, 97,1 kN
Quick height adjustment with rotation lock, load capacity up to 40 km/h 2800 kg,...
€2.111,26 €1.744,84 €1.719,18 €1.420,81
 
Gear wheel main shaft 31 teeth Valtra-Valmet
8%
Gear wheel main shaft 31 teeth Valtra-Valmet
Number of teeth: 31.
€423,24 €349,79 €389,38 €321,80
 
Cobo Contact switch mechanical brake light, clutch, PTO shaft, 12 / 24 V
8%
Cobo
Contact switch mechanical brake light, clutch, PTO shaft, 12 / 24 V
Version: For brake light, clutch, four-wheel drive, PTO, 12/24 V, power rating: ...
€32,65 €26,98 €30,04 €24,82
 
Scharmüller Support plate Piton Fix manual, 445 x 220 x 40 mm, 3 ton, AGCO gray
8%
Scharmüller
Support plate Piton Fix manual, 445 x 220 x 40 mm, 3 ton, AGCO gray
D-value (kN): 71,9 | Category: Support plates | Lock: Piton Fix manual | Version...
€987,09 €815,78 €908,12 €750,51
 
Wiper motor Massey Ferguson, Valtra-Valmet
8%
Wiper motor Massey Ferguson, Valtra-Valmet
€223,30 €184,55 €205,44 €169,78
 
Filter dryer Ø 76 mm, 228 mm, connection thread M
8%
Filter dryer Ø 76 mm, 228 mm, connection thread M
Outer Ø (mm): 76 | Connection: O-ring A = male thread 3/8"" - 18UNF O-ring B = m...
€63,79 €52,72 €58,69 €48,50
 
Expansion valve airco 1/2 inch o-ring, 35 g
8%
Expansion valve airco 1/2 inch o-ring, 35 g
Weight (g): 35 | Equipment: O-ring | Connection thread A: # 8, 1/2"" O-ring | Co...
€54,07 €44,69 €49,74 €41,11
 
Gear wheel planetary set rear axle 82 teeth Valtra-Valmet
8%
Gear wheel planetary set rear axle 82 teeth Valtra-Valmet
Number of teeth: 82.
€894,96 €739,64 €823,36 €680,47
 
Cobo Flasher unit 12 V, 2+1+1 / 8 x 21 W, 6 connections, with holder
8%
Cobo
Flasher unit 12 V, 2+1+1 / 8 x 21 W, 6 connections, with holder
Version: 12 V / 2 + 1 + 1 x 21 / 8 x 21 W, With bracket, With hazard warning lig...
€58,12 €48,03 €53,47 €44,19
 
Walterscheid Adapter plate rail width 330 mm, hole pattern 160 x 100 mm, M21
21%
Walterscheid
Adapter plate rail width 330 mm, hole pattern 160 x 100 mm, M21
Guide width (mm): 32 | Description: The coupling plate is a height-adjustable sl...
€1.207,08 €997,59 €954,33 €788,70
 
Scharmüller Drawbar ball 50, rail 200 mm, pin Ø 16 mm, 150 kg
8%
Scharmüller
Drawbar ball 50, rail 200 mm, pin Ø 16 mm, 150 kg
Rail width: 200 mm. Guide width: 25 mm. Detent pin Ø: 16 mm. Load capacity: 150 ...
€583,34 €482,10 €536,67 €443,53
 
LUK Torsion damper Valtra-Valmet C90 - C150, M120 - M150, N82 - N142
8%
LUK
Torsion damper Valtra-Valmet C90 - C150, M120 - M150, N82 - N142
€801,39 €662,31 €737,28 €609,32
 
MAHLE Alternator 14 V, 120 A, flange 56 mm, compact, dust-tight
40%
MAHLE
Alternator 14 V, 120 A, flange 56 mm, compact, dust-tight
Direction of rotation: ↻ | Installation angle (°): l 30 | Pulley Ø (mm): - | Add...
€388,90 €321,41 €232,93 €192,50
 
Turbocharger Case IH CS 78-110, Steyr, Valtra-Valmet
4%
Turbocharger Case IH CS 78-110, Steyr, Valtra-Valmet
€1.328,18 €1.097,67 €1.272,81 €1.051,91
 
Gas strut door 250 N, 345 mm, stroke 126 mm Massey Ferguson 4745ZN
8%
Gas strut door 250 N, 345 mm, stroke 126 mm Massey Ferguson 4745ZN
suitable for: Tür. Newtons: 250. A: 345 mm. B: 175 mm. C: 8 mm. D: 8 mm. Form: 2...
€34,26 €28,31 €31,52 €26,05
 
Clutches set 7+7 Valtra-Valmet 6250 - 8950, C90 - XM150
8%
Clutches set 7+7 Valtra-Valmet 6250 - 8950, C90 - XM150
€171,21 €141,50 €157,51 €130,18
 
DANA Spicer Wheel hub final drive front axle 730
DANA Spicer
Wheel hub final drive front axle 730
€408,30 €337,44
 
DANA Spicer Hollow wheel carrier final drive front axle 212, 5,22 kg
DANA Spicer
Hollow wheel carrier final drive front axle 212, 5,22 kg
€513,07 €424,03
 
Alternator 14 V, 120 A, flange 56 mm, Fendt, Valtra-Valmet
8%
Alternator 14 V, 120 A, flange 56 mm, Fendt, Valtra-Valmet
Pulley spacing (mm): - | Form: B | Additional information: Compact alternator, d...
€275,46 €227,65 €253,42 €209,44
 
Clutches set 9+9 Valtra-Valmet 6250 - 8950, C90 - XM150
8%
Clutches set 9+9 Valtra-Valmet 6250 - 8950, C90 - XM150
€230,48 €190,48 €212,04 €175,24
 
DANA Spicer Track rod steering front axle 725/534
DANA Spicer
Track rod steering front axle 725/534
€484,17 €400,14
 
MAHLE Gear reduction starter 3,2 kW, 11 teeth clockwise, 204,3 mm, Ø 89 mm
40%
MAHLE
Gear reduction starter 3,2 kW, 11 teeth clockwise, 204,3 mm, Ø 89 mm
€548,46 €453,27 €328,50 €271,49
 
Reman turbocharger Valtra-Valmet, Steyr, Case IH
4%
Reman turbocharger Valtra-Valmet, Steyr, Case IH
€1.024,99 €847,10 €982,26 €811,79
 
Scharmüller Drawbar frame 10 kN, rail width 200 mm, nose weight 350 kg
8%
Scharmüller
Drawbar frame 10 kN, rail width 200 mm, nose weight 350 kg
Version: Standard | Category: Bearing supports | Guide width (mm): 25 | Rail wid...
€668,46 €552,45 €614,98 €508,25
 
PTO shaft end piece 1 3/8 inch, 6 splines, 245 mm Valtra-Valmet
8%
PTO shaft end piece 1 3/8 inch, 6 splines, 245 mm Valtra-Valmet
Version: 1 3/8"", 6 grooves | Length (mm): 245
€415,22 €343,16 €382,00 €315,70
 
CARLISLE External plate Hi-Lo 1,5 mm, inner 98,9 mm, outer 142,5 mm, 6 teeth
CARLISLE
External plate Hi-Lo 1,5 mm, inner 98,9 mm, outer 142,5 mm, 6 teeth
Version: thickness = 1,5 mm inner = 98,9 mm outer = 142,5 mm 6 teeth
€17,19 €14,20
 
Aircon compressor 12 V, Ø 132 mm, 2 grooves, 210 ccm
8%
Aircon compressor 12 V, Ø 132 mm, 2 grooves, 210 ccm
No. of grooves: 2 | Nominal voltage (V): 12 | Connection: 7/8"" x 3/4"", vertica...
€426,97 €352,87 €392,81 €324,64
 
DANA Spicer Spacer as front axle 745, outer-Ø 150 mm, inner-Ø 120 mm, 1 mm
8%
DANA Spicer
Spacer as front axle 745, outer-Ø 150 mm, inner-Ø 120 mm, 1 mm
Thickness (mm): 1 | Outer Ø (mm): 150 | Inner Ø (mm): 120
€46,81 €38,69 €43,07 €35,59
 
DANA Spicer Intermediate bush as front axle 745, 120 x 127 x 40 mm
8%
DANA Spicer
Intermediate bush as front axle 745, 120 x 127 x 40 mm
Dimensions (mm): 120 x 127 x 40 | Inner Ø (mm): 120 | Height (mm): 40 | Outer Ø ...
€140,42 €116,05 €129,19 €106,77
 
HELLA Alternator 14 V, 120 A Fendt, Valtra-Valmet
23%
HELLA
Alternator 14 V, 120 A Fendt, Valtra-Valmet
Nominal values (V / A): 14 / 120 | Charging current (A): 120 | Nominal voltage (...
€554,78 €458,50 €427,45 €353,26
 
Clutch plate set omkeerinrichting Valtra-Valmet
8%
Clutch plate set omkeerinrichting Valtra-Valmet
€486,96 €402,45 €448,00 €370,25
 
Scharmüller Pick-Up Hitch einsätze 80 shank 60 x 80 mm, 417 mm, bore 26 mm
8%
Scharmüller
Pick-Up Hitch einsätze 80 shank 60 x 80 mm, 417 mm, bore 26 mm
suitable for: Valtra. Series: C-Serie. Category: Pick-up hitch. Version: ball 80...
€1.428,29 €1.180,41 €1.314,03 €1.085,97
 
Walterscheid Drawbar ball 80 rail 330 mm, pin Ø 25 mm, 4000 kg, black
21%
Walterscheid
Drawbar ball 80 rail 330 mm, pin Ø 25 mm, 4000 kg, black
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000...
€2.152,79 €1.779,17 €1.702,02 €1.406,63
 
LED work lights spotlight 3600 lm, 36 W, 148 x 95 x 58 mm
8%
LED work lights spotlight 3600 lm, 36 W, 148 x 95 x 58 mm
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs included:...
€77,66 €64,18 €71,45 €59,05
 
Flasher unit 12 V, 2+1+1 x 21 W, with holder and indicator instruments
8%
Flasher unit 12 V, 2+1+1 x 21 W, with holder and indicator instruments
To fit as: Case IH 238, 248, 258, 268, 278, 288, 323, 354, 374, 384, 444, 474, 4...
€48,67 €40,22 €44,78 €37,01
 
DANA Spicer Sealing ring final drive front axle 755, 40 x 65 x 18 mm
8%
DANA Spicer
Sealing ring final drive front axle 755, 40 x 65 x 18 mm
Dimensions (mm): 40 x 65 x 18
€33,83 €27,96 €31,12 €25,72
 
Collet set Valtra-Valmet 255-865
Collet set Valtra-Valmet 255-865
€5,70 €4,71
 
Showing 1 - 48 of 113

Valtra N 92 parts for turbo, cylinder head and lighting

A whistle under acceleration or blue smoke from the exhaust on an N 92 usually points to the turbo or the manifold. Before changing the turbo, inspect the intake side too, because anything drawn in will damage a new unit just as quickly. This page lists more than 110 Valtra N 92 parts, new parts from GRANIT, Scharmüller, DANA Spicer, Walterscheid and Cobo.

Turbocharger and exhaust manifold

There are remanufactured turbochargers, exhaust manifold seals for the turbo connection and manifold gaskets. Before the first start, prime a new turbo by filling it with clean engine oil through the oil feed, then let the engine idle for a few seconds without touching the throttle. That way the shaft never spins dry. Check the oil feed and return pipes for dirt and kinks too, because a blocked line is a common reason the old turbo failed in the first place.

Cylinder head and engine seals

Cylinder head bolts, crankshaft seals, feed pump O-rings, sealing rings and thermostats complete the engine group. If the head comes off, fit new head bolts and tighten them in stages in a crosswise pattern. They stretch when tightened and will not give the same clamping force a second time. A thermostat always goes back with a clean gasket face and the right way round.

Lighting, cab and towing

Headlights, LED headlights for dipped and main beam, and work lamps keep visibility good. A flasher unit with holder sorts out indicator problems, provided the bulbs themselves are fine. Door locks cover the cab, and for towing there are drawbars with a ball and separate balls for the rail.

After replacing a headlight, aim it against a wall so you do not dazzle oncoming traffic. A stiff door lock works far more smoothly if you grease the lock and striker when fitting the new one. Keep the hitch ball lightly greased too, which also reduces wear on the trailer eye.

Making sure it fits your N 92

Check the type plate to confirm you have an N 92. With a turbo, the number on the turbo's own label is what matters, so compare that with the details shown with the item. For gaskets, compare the bolt pattern with the old one.

Two other models from the N range have their own pages with matching parts: the Valtra N 122 and the Valtra N 142. Any other Valtra model can be reached through Valtra parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart