Menu
EUR
Techniek Totaal Logo

We are closed today

Dear visitor!

Welcome to our site. Today is Sunday, a day of rest in the Christian religion. Therefore, we have chosen not to work today, and our webshop is closed. Of course, you are warmly welcome again tomorrow.

Have a nice Sunday and best regards,
Team Techniek Totaal

Valtra S 274 tractor parts & technical data

A Valtra S 274 needs parts that truly fit. This page lists more than 70 parts for this S4 series model, such as trailer couplings, electrics and engine parts.

77 parts found for Valtra-Valmet S 274
Show:
Wabco Solenoid valve 3/2-way, 12 V, 1,41 A, M16 x 1,5, standard closed
8%
Wabco
Solenoid valve 3/2-way, 12 V, 1,41 A, M16 x 1,5, standard closed
Eligible: Environmental protection and safety (formerly de minimis)
€408,59 €337,68 €375,90 €310,66
 
Knorr Bremse Antifreeze pump air pressure- / brake system, 684 g
8%
Knorr Bremse
Antifreeze pump air pressure- / brake system, 684 g
€280,12 €231,50 €257,71 €212,98
 
NOX sensor Massey Ferguson, Valtra-Valmet, Fendt
8%
NOX sensor Massey Ferguson, Valtra-Valmet, Fendt
To fit: Massey Ferguson, Valtra-Valmet, Fendt.
€453,61 €374,88 €417,32 €344,89
 
Scharmüller Drawbar frame standard ball 80, 104 kN, 4000 kg, rail 390 mm
6%
Scharmüller
Drawbar frame standard ball 80, 104 kN, 4000 kg, rail 390 mm
Detent pin Ø (mm): 25 | Colour: AGCO grey | Lock: Ball 80 manual | Rail width (m...
€2.326,08 €1.922,38 €2.189,99 €1.809,91
 
Walterscheid Inner part ball 80 rail width 390 mm, pin Ø 25 mm, 4000 kg
21%
Walterscheid
Inner part ball 80 rail width 390 mm, pin Ø 25 mm, 4000 kg
Colour: Black | Load capacity (kg): 3000 | Ball Ø (mm): 80 | D-value (kN): 102 |...
€2.263,90 €1.870,99 €1.789,86 €1.479,23
 
Scharmüller Drawbar retrofit kit 80 x 50 mm, 89,3 kN, 2200 kg, cat. 2, AGCO gray
8%
Scharmüller
Drawbar retrofit kit 80 x 50 mm, 89,3 kN, 2200 kg, cat. 2, AGCO gray
Mounting position: 2 | Colour: AGCO grey | Width (mm): 80 | Load capacity (kg): ...
€620,46 €512,78 €570,82 €471,75
 
Walterscheid Piton Fix rail width 390 mm, locking pin Ø 25 mm, 3000 kg, 89,3 kN
21%
Walterscheid
Piton Fix rail width 390 mm, locking pin Ø 25 mm, 3000 kg, 89,3 kN
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000...
€1.781,58 €1.472,38 €1.408,53 €1.164,08
 
Scharmüller Forced steering 80 Pick-Up Hitch einsätze K50, 2 ton, 101 mm
5%
Scharmüller
Forced steering 80 Pick-Up Hitch einsätze K50, 2 ton, 101 mm
Assembly notes: Both ends. Lock: K50. Steering power: 2 t. Internal width: 101 m...
€1.031,70 €852,64 €977,51 €807,86
 
Denso Air conditioning compressor 12 V, pulley Ø 120 mm, 8 grooves
Denso
Air conditioning compressor 12 V, pulley Ø 120 mm, 8 grooves
No. of grooves: 8 | Nominal voltage (V): 12 | Fixing: DM | Oil quantity (ccm): 2...
€951,15 €786,08
 
Walterscheid Drawbar ball 80 automatic, rail 390 mm, pin Ø 25 mm, 2000/2800 kg
19%
Walterscheid
Drawbar ball 80 automatic, rail 390 mm, pin Ø 25 mm, 2000/2800 kg
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 2000...
€2.277,79 €1.882,47 €1.850,84 €1.529,62
 
Scharmüller Schroefkogeladapter K80 D 118 kN, nose weight 3000 kg, M16 / M20
8%
Scharmüller
Schroefkogeladapter K80 D 118 kN, nose weight 3000 kg, M16 / M20
Category: Components and special solutions | Lock: ball 80 | Hole (mm): M16 / M2...
€1.926,92 €1.592,50 €1.772,77 €1.465,10
 
Scharmüller Schroefkogeladapter K80 3000 kg, 118 kN, bore M16 / M20, black
5%
Scharmüller
Schroefkogeladapter K80 3000 kg, 118 kN, bore M16 / M20, black
V-value (kN): 83 | Hole (mm): M16 / M20 | Version: Threaded ball adapter K80 | D...
€1.926,92 €1.592,50 €1.822,77 €1.506,42
 
Scharmüller Schroefkogeladapter K80 3000 kg, 118 kN, bore M16, thread M20, black
5%
Scharmüller
Schroefkogeladapter K80 3000 kg, 118 kN, bore M16, thread M20, black
D-value (kN): 118 | Thread: M20 | Hole (mm): M16 | Load capacity (kg): 3000 | Lo...
€1.926,92 €1.592,50 €1.822,77 €1.506,42
 
Scharmüller Drawbar pin-Ø 31,5 mm, 1003 mm, category 2, AGCO gray
Scharmüller
Drawbar pin-Ø 31,5 mm, 1003 mm, category 2, AGCO gray
Load capacity (kg): 2200 | Width (mm): 80 | Pin Ø (mm): 31,5 | Mounting position...
€469,58 €388,08
 
Scharmüller Forced steering 250 mm, K50, left, 2 ton, black, 4,86 kg
6%
Scharmüller
Forced steering 250 mm, K50, left, 2 ton, black, 4,86 kg
Steering power (t): 2 | Colour: Black | Lock: K50 | Assembly notes: Anticlockwis...
€481,06 €397,57 €453,50 €374,79
 
Starter ring gear Ø 423/393 mm, 132 teeth Massey Ferguson
8%
Starter ring gear Ø 423/393 mm, 132 teeth Massey Ferguson
Version: Ø 423/393 mm, 132 teeth.
€120,29 €99,41 €110,67 €91,46
 
Scharmüller Drawbar frame standard Piton fix, 97,1 kN, 3000 kg, rail 390 mm
5%
Scharmüller
Drawbar frame standard Piton fix, 97,1 kN, 3000 kg, rail 390 mm
Rail width (mm): 390 | Lock: Piton Fix manual | Guide width (mm): 32 | Colour: A...
€1.562,20 €1.291,07 €1.487,22 €1.229,11
 
Pilot bearing 20 x 42 x 12 mm
Pilot bearing 20 x 42 x 12 mm
Dimensions (mm): 20 x 42 x 12
€7,63 €6,30
 
Alternator 14 V, 120 A without belt pulley Massey Ferguson, Valtra-Valmet
8%
Alternator 14 V, 120 A without belt pulley Massey Ferguson, Valtra-Valmet
Flange size (mm): 56,0 | Nominal values (V / A): 12 / 120 | Nominal voltage (V):...
€302,92 €250,35 €278,69 €230,32
 
Tank cap with ventilation Lockable, thread Ø 60 / 64 mm
8%
Tank cap with ventilation Lockable, thread Ø 60 / 64 mm
Thread Ø mm: 60 / 64. Filler neck Ø: 65 mm.
€36,91 €30,50 €33,96 €28,06
 
Temperature sensor exhaust aftertreatment
8%
Temperature sensor exhaust aftertreatment
€233,28 €192,79 €214,62 €177,37
 
Differential pressure sensor Massey Ferguson, Valtra-Valmet, Fendt
4%
Differential pressure sensor Massey Ferguson, Valtra-Valmet, Fendt
€176,91 €146,21 €169,54 €140,11
 
Rail pressure sensor Valtra-Valmet, Fendt, Massey Ferguson
8%
Rail pressure sensor Valtra-Valmet, Fendt, Massey Ferguson
€295,33 €244,07 €271,70 €224,55
 
SACHS Shock absorber rear, air spring PSE32/20X75A2ED
8%
SACHS
Shock absorber rear, air spring PSE32/20X75A2ED
Design: Air spring | To fit: Valtra, Massey Ferguson | System: Air suspension be...
€1.532,49 €1.266,52 €1.409,89 €1.165,20
 
Outlet valve Fendt, Massey Ferguson
Outlet valve Fendt, Massey Ferguson
€58,29 €48,18
 
Spring fender right Massey Ferguson, Challenger, Valtra-Valmet
8%
Spring fender right Massey Ferguson, Challenger, Valtra-Valmet
€71,72 €59,27 €65,98 €54,53
 
Air hose intercooler 75 mm
Air hose intercooler 75 mm
Length: 75 mm.
€76,88 €63,54
 
Piston ring set 3 rings Ø 111 mm, 3 mm / 2,5 mm / 3 mm
8%
Piston ring set 3 rings Ø 111 mm, 3 mm / 2,5 mm / 3 mm
€59,34 €49,04 €54,59 €45,12
 
Piston set, complete 3 rings, Ø 111 mm, combustion chamber Ø 75,35 mm
8%
Piston set, complete 3 rings, Ø 111 mm, combustion chamber Ø 75,35 mm
€267,02 €220,68 €245,66 €203,02
 
Pressure pipe Fendt, Massey Ferguson
Pressure pipe Fendt, Massey Ferguson
Designation: For 38015243.
€133,71 €110,50
 
Scharmüller Support plates ball 80, 965 x 270 mm, thickness 50 mm, 97,1 kN
6%
Scharmüller
Support plates ball 80, 965 x 270 mm, thickness 50 mm, 97,1 kN
Thickness (mm): 50 | Load capacity (t): 3 | Number of heart pins: 1 | Lock: ball...
€2.025,12 €1.673,65 €1.913,11 €1.581,08
 
NOX sensor Massey Ferguson, Challenger, Valtra-Valmet
8%
NOX sensor Massey Ferguson, Challenger, Valtra-Valmet
€874,29 €722,55 €804,35 €664,75
 
Temperature sensor Fendt, Massey Ferguson, Valtra-Valmet
8%
Temperature sensor Fendt, Massey Ferguson, Valtra-Valmet
€94,76 €78,31 €87,18 €72,05
 
AdBlue-feed unit Valtra-Valmet A84-A134
8%
AdBlue-feed unit Valtra-Valmet A84-A134
Description: AdBlue supply units ensure even metering of AdBlue depending on the...
€1.047,79 €865,94 €963,97 €796,67
 
O-ring piston 1x required Fendt, Massey Ferguson, Valtra-Valmet
O-ring piston 1x required Fendt, Massey Ferguson, Valtra-Valmet
Description: 1x required.
€25,31 €20,92
 
Hydraulic top link cat. 3, 680 - 895 mm, stroke 215 mm, 14 ton
8%
Hydraulic top link cat. 3, 680 - 895 mm, stroke 215 mm, 14 ton
A cat.: 3 / 32. B cat.: 3 / 32. F: 680 / 895 mm. Piston rod Ø D: 45 mm. Cylinder...
€940,99 €777,68 €865,71 €715,46
 
Pivot
8%
Pivot
€585,11 €483,56 €538,30 €444,88
 
Showing 1 - 48 of 77

Valtra S 274 parts for the hitch, fenders and exhaust sensors

A Valtra S 274 spends much of its life pulling heavy trailers on the road, and the parts on this page reflect that: coupling hardware at the rear, fender mountings and sensors in the exhaust. This page lists more than 70 parts that fit the S 274, from GRANIT and from makers such as Scharmüller, Walterscheid, SACHS and Denso.

Hitching and steering axles

For the rear there are drawbars, base plates, screw-on ball adapters and a swinging drawbar for retrofitting. You will also find forced steering parts, such as an insert for the pick-up hitch. A practical point for screw-on balls: tighten them to the specified torque and recheck the locking after the first few days behind a heavy trailer. A ball that works even slightly loose will chew up its thread in no time.

Keeping the fenders in place

The steering fenders on the S 274 hang from fender brackets, pivots and springs. When a fender starts rattling or no longer springs back, a stretched spring or a worn pivot is usually behind it. Both are sold separately for left and right, as are the brackets. Give the pivot a light coat of grease on assembly so it follows the wheels smoothly.

Engine and exhaust

Around the engine there are temperature sensors, a NOX sensor for the exhaust aftertreatment, a belt tensioner, a signal transmitter and a vented tank cap, along with seals and O-rings. Only remove a NOX sensor once the exhaust has cooled, and keep the connector clean and dry when you plug it back in. A belt tensioner that whines or visibly wobbles should be changed before the belt comes off.

A vented tank cap looks like a simple item, yet if the valve clogs, a vacuum builds up in the tank. The engine is then starved of fuel and loses pulling power for no obvious reason, so swap a cap whose valve sticks or whose rubber has split.

Identifying the right part

Read the type plate first so you know for certain it is an S 274. Then match the number on the old part with the reference number given for the product. With hitch parts, also take into account the system already fitted to the tractor, since not every ball or piton suits every base plate.

From the same S range, the Valtra S 374 has a separate page too, handy if one is parked next to the S 274. For any other Valtra tractor on the farm, start from Valtra parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart