Menu
EUR

Valtra 705 tractor parts & technical data

Valtra 705 or Valmet 705, this page covers both names. Browse more than 60 parts, including electrics, lighting and components for steering and front axle.

66 parts found for Valtra-Valmet 705
Show:
Installation cable mini-contact plug 1 m
8%
Installation cable mini-contact plug 1 m
Length: 1 m. Technical data: Closure: 1.0 m. Reference no.: 1762510.
€171,07 €141,38 €157,38 €130,07
 
LED headlight dipped beam / main beam 12 / 24 V, 167 x 107 x 78 mm
8%
LED headlight dipped beam / main beam 12 / 24 V, 167 x 107 x 78 mm
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs included:...
€124,12 €102,58 €114,19 €94,37
 
VDO Coolant temperature sensor M14 x 1,5, +40 - +120 °C, 98 °C
8%
VDO
Coolant temperature sensor M14 x 1,5, +40 - +120 °C, 98 °C
Version: Temperature measuring range: +40°C to +120°C, Thread: M14 x 1.5, Resist...
€162,00 €133,88 €149,04 €123,17
 
Starter motor 12 V, 3,0 kW, 11 teeth, 229,5 mm, Ø 89 mm
8%
Starter motor 12 V, 3,0 kW, 11 teeth, 229,5 mm, Ø 89 mm
€315,38 €260,64 €290,15 €239,79
 
Cobo Flasher unit 12 V, 2+1+1 / 8 x 21 W, 6 connections, with holder
8%
Cobo
Flasher unit 12 V, 2+1+1 / 8 x 21 W, 6 connections, with holder
Version: 12 V / 2 + 1 + 1 x 21 / 8 x 21 W, With bracket, With hazard warning lig...
€58,12 €48,03 €53,47 €44,19
 
MAHLE Starter motor 12 V, 3,0 kW, 11 teeth, mounting Ø 89 mm, mounting angle r 45
40%
MAHLE
Starter motor 12 V, 3,0 kW, 11 teeth, mounting Ø 89 mm, mounting angle r 45
€505,95 €418,14 €303,03 €250,44
 
Clutch plate 310 sintered 41 x 45 mm, 22 splines Valtra-Valmet
8%
Clutch plate 310 sintered 41 x 45 mm, 22 splines Valtra-Valmet
Dimensions (mm): 41 x 45 22 grooves | Material specifications: Sintered clutch l...
€221,34 €182,93 €203,63 €168,29
 
Feed pump 3 hole, 50 x 34 mm, roller 23 mm Mercedes Benz, Valtra-Valmet
8%
Feed pump 3 hole, 50 x 34 mm, roller 23 mm Mercedes Benz, Valtra-Valmet
Version: 3 holes, Vertical hole spacing: 50 mm, Horizontal hole spacing: 34 mm, ...
€45,33 €37,46 €41,70 €34,47
 
LUK Thrust bearing driving clutch 60 x 97 x 26 Fendt, Landini, Valtra-Valmet
8%
LUK
Thrust bearing driving clutch 60 x 97 x 26 Fendt, Landini, Valtra-Valmet
Dimensions (mm): 60 x 97 x 26
€121,34 €100,28 €111,63 €92,26
 
MAHLE Alternator 14 V, 65 A, pulley-Ø 80 mm, form A
40%
MAHLE
Alternator 14 V, 65 A, pulley-Ø 80 mm, form A
Pulley Ø (mm): 80.0 | Charging current (A): 65 | Form: A | Pulley spacing (mm): ...
€234,35 €193,68 €140,36 €116,00
 
MAHLE Gear reduction starter 3,2 kW, 11 teeth clockwise, 204,3 mm, Ø 89 mm
40%
MAHLE
Gear reduction starter 3,2 kW, 11 teeth clockwise, 204,3 mm, Ø 89 mm
€548,46 €453,27 €328,50 €271,49
 
Starter motor with reduction 12 V, 2,7 kW, 11 teeth, 193 mm, Ø 89 mm
8%
Starter motor with reduction 12 V, 2,7 kW, 11 teeth, 193 mm, Ø 89 mm
€247,59 €204,62 €227,78 €188,25
 
Master brake cylinder K1, DOT 4, Valtra-Valmet, Case IH
8%
Master brake cylinder K1, DOT 4, Valtra-Valmet, Case IH
Description: K1.
€137,83 €113,91 €126,80 €104,80
 
Alternator 14 V / 65 A, form A, flange 86,0 mm, pulley-Ø 90,0 mm
8%
Alternator 14 V / 65 A, form A, flange 86,0 mm, pulley-Ø 90,0 mm
To fit as: Ford, Lindner, Valtra-Valmet
€239,13 €197,63 €220,00 €181,82
 
Hydraulic pump double 22,5 + 12 cm³ Valtra-Valmet 505 - 905
8%
Hydraulic pump double 22,5 + 12 cm³ Valtra-Valmet 505 - 905
Output volume (cc/rev): 22,5 + 12
€837,13 €691,84 €770,16 €636,50
 
Alternator 14 V / 65 A, flange 86 mm, pulley Ø 90 mm
8%
Alternator 14 V / 65 A, flange 86 mm, pulley Ø 90 mm
Flange size (mm): 86,0 | Belt tension hole Ø / R (mm): M8 / 86,0 | Mounting L / ...
€152,63 €126,14 €140,42 €116,05
 
Radiator hose, top inner-Ø 40 mm Valtra-Valmet Mezzo 6000-6800
8%
Radiator hose, top inner-Ø 40 mm Valtra-Valmet Mezzo 6000-6800
Inner Ø: 40 mm.
€51,59 €42,64 €47,46 €39,23
 
Flasher unit 12 V, 2+1+1 x 21 W, with holder and indicator instruments
8%
Flasher unit 12 V, 2+1+1 x 21 W, with holder and indicator instruments
To fit as: Case IH 238, 248, 258, 268, 278, 288, 323, 354, 374, 384, 444, 474, 4...
€48,67 €40,22 €44,78 €37,01
 
Clutch plate single clutch 1020 - 1140 Kp, flywheel flat
8%
Clutch plate single clutch 1020 - 1140 Kp, flywheel flat
Contact pressure (Kp): 1020 - 1140 | Flywheel design: Flat | Additional informat...
€225,76 €186,58 €207,70 €171,65
 
Radiator Valtra-Valmet 505-855, engine Sisu 311, 411
8%
Radiator Valtra-Valmet 505-855, engine Sisu 311, 411
To fit as: Valtra-Valmet Engine Sisu: 311, 411; Series 05: 505, 605, 705, 805; S...
€581,76 €480,79 €535,22 €442,33
 
Glow plug 12 V, 15,5 A, thread 7/8 inch - 14 UNF
Glow plug 12 V, 15,5 A, thread 7/8 inch - 14 UNF
Version: 12 V, 15.5 A, thread 7/8" - 14 UNF.
€33,85 €27,98
 
Cylinder head gasket Valtra-Valmet 705, 805, 865
8%
Cylinder head gasket Valtra-Valmet 705, 805, 865
€71,47 €59,07 €65,75 €54,34
 
Injection nozzle Valtra-Valmet 205-855
8%
Injection nozzle Valtra-Valmet 205-855
Type formula: DLLA150S804, 0433271856.
€40,77 €33,69 €37,51 €31,00
 
Stop cable 2015 / 2250 mm Valtra-Valmet 205-905, 6000-8750
Stop cable 2015 / 2250 mm Valtra-Valmet 205-905, 6000-8750
To fit as: Valtra - Valmet 205, 305, 365, 405, 465, 505, 600, 605, 665, 700, 705...
€34,18 €28,24
 
Ball joint taper 16,2 - 18,3 mm, length 100 mm, M14 x 1,5, M22 x 1,5 L
8%
Ball joint taper 16,2 - 18,3 mm, length 100 mm, M14 x 1,5, M22 x 1,5 L
A: 100 mm. C: M14 x 1,5 mm. D: M22 x 1,5 L mm. E: 16,2 mm. F: 18,3 mm. Taper: 16...
€71,69 €59,25 €65,95 €54,51
 
Ball joint taper 20 - 22,2 mm, M18 x 1,5, M24 x 1,5 L, 106 mm
8%
Ball joint taper 20 - 22,2 mm, M18 x 1,5, M24 x 1,5 L, 106 mm
A: 106 mm. C: M18 x 1,5 mm. D: M24 x 1,5 L mm. E: 20 mm. F: 22,2 mm. Taper: 20 -...
€60,06 €49,64 €55,26 €45,67
 
Thermostat Ø 67 mm, 83 °C Massey Ferguson, Case IH, Steyr
8%
Thermostat Ø 67 mm, 83 °C Massey Ferguson, Case IH, Steyr
Ø: 67 mm. Temperature: 83 °C.
€38,47 €31,79 €35,39 €29,25
 
Inlet valve engine Sisu 311-611 Valtra-Valmet
8%
Inlet valve engine Sisu 311-611 Valtra-Valmet
€113,89 €94,12 €104,78 €86,59
 
Valve Valtra-Valmet 355-1203
8%
Valve Valtra-Valmet 355-1203
€99,04 €81,85 €91,12 €75,30
 
Oil pressure switch engine and transmission M10 x 1, 0,15 - 0,45 bar
Oil pressure switch engine and transmission M10 x 1, 0,15 - 0,45 bar
Version: Thread: M10 x 1 cylindrical, Switching pressure: 0.15 - 0.45 bar, Blade...
€27,39 €22,63
 
Ball joint right and left M16 x 1,5, M24 x 1,5, taper 18 - 20 mm
8%
Ball joint right and left M16 x 1,5, M24 x 1,5, taper 18 - 20 mm
A: 105 mm. C: M16 x 1,5 mm. D: M24 x 1,5 mm. E: 18 mm. F: 20 mm. Taper: 18 - 20 ...
€39,87 €32,95 €36,68 €30,31
 
Ball joint 522 mm, M16 x 1,5, 22 mm
8%
Ball joint 522 mm, M16 x 1,5, 22 mm
A: 522 mm. C: M16 x 1,5 mm. D: 22 mm. E: 18 mm. F: 20,2 mm. Taper: 18 - 20,2 mm.
€69,02 €57,04 €63,50 €52,48
 
Repair set brake cylinder Valtra-Valmet, Fendt
8%
Repair set brake cylinder Valtra-Valmet, Fendt
€39,37 €32,54 €36,22 €29,93
 
Feed pump 3 hole, hole spacing 52 x 34 mm, flange 23 mm
8%
Feed pump 3 hole, hole spacing 52 x 34 mm, flange 23 mm
Version: 3 holes, Vertical hole spacing: 52 mm, Horizontal hole spacing: 34 mm, ...
€121,09 €100,07 €111,40 €92,07
 
Turbocharger Valtra-Valmet 705
4%
Turbocharger Valtra-Valmet 705
€1.272,56 €1.051,70 €1.219,51 €1.007,86
 
O-clamp set 115 x 3,5 mm Steyr, Massey Ferguson - 3 pieces
8%
O-clamp set 115 x 3,5 mm Steyr, Massey Ferguson - 3 pieces
Dimensions: All rings 115 x 3.5 mm.
€35,00 €28,93 €32,20 €26,61
 
HELLA Headlight left / right 12 / 24 V, H4, glass 164 x 103 mm, built-in Fendt
4%
HELLA
Headlight left / right 12 / 24 V, H4, glass 164 x 103 mm, built-in Fendt
Bulb: 12V60/55W / H4, 12V4WK / T4W, 24V75/70W / H4, 24V4WK / T4W. Fixing: 3-poin...
€107,20 €88,60 €103,23 €85,32
 
Ball joint 100 mm, taper 16,2 - 18,3 mm, M14 x 1,5, M22 x 1,5
8%
Ball joint 100 mm, taper 16,2 - 18,3 mm, M14 x 1,5, M22 x 1,5
A: 100 mm. C: M14 x 1,5 mm. D: M22 x 1,5 mm. E: 16,2 mm. F: 18,3 mm. Taper: 16,2...
€71,69 €59,25 €65,95 €54,51
 
Ball joint 205 mm, M20 x 1,5, M22 x 1,5, taper 23,5 - 26,2 mm
8%
Ball joint 205 mm, M20 x 1,5, M22 x 1,5, taper 23,5 - 26,2 mm
A: 205 mm. C: M20 x 1,5 mm. D: M22 x 1,5 mm. E: 23,5 mm. F: 26,2 mm. Taper: 23,5...
€73,47 €60,72 €67,59 €55,86
 
Axial joint 205 mm, M22 x 1,5, M22 x 1,5, Ø 56 mm, Ø 40 mm
8%
Axial joint 205 mm, M22 x 1,5, M22 x 1,5, Ø 56 mm, Ø 40 mm
A: 205 mm. C: M22 x 1,5 mm. D: M22 x 1,5 mm. Ø B: 56 mm. Ø E: 40 mm.
€81,60 €67,44 €75,07 €62,04
 
Ball joint 220 mm, M22 x 1,5, M22 x 1,5, taper 23,5 - 26,4 mm
8%
Ball joint 220 mm, M22 x 1,5, M22 x 1,5, taper 23,5 - 26,4 mm
A: 220 mm. C: M22 x 1,5 mm. D: M22 x 1,5 mm. E: 23,5 mm. F: 26,4 mm. Taper: 23,5...
€82,92 €68,53 €76,29 €63,05
 
Wheel brake cylinder Ø 34,92 mm, DOT 4, with piston rod Steyr 667, 680
8%
Wheel brake cylinder Ø 34,92 mm, DOT 4, with piston rod Steyr 667, 680
Medium: DOT4. Hole Ø: 34.92 mm. Additional information: With piston rod.
€179,36 €148,23 €165,01 €136,37
 
Repair set clutch cylinder Valtra-Valmet, Steyr
8%
Repair set clutch cylinder Valtra-Valmet, Steyr
€54,42 €44,98 €50,07 €41,38
 
Wheel brake cylinder K1, DOT 4 Valtra-Valmet Mezzo 6000-6900
8%
Wheel brake cylinder K1, DOT 4 Valtra-Valmet Mezzo 6000-6900
Description: K1.
€183,75 €151,86 €169,05 €139,71
 
Showing 1 - 48 of 66

Valmet 705 and Valtra 705 parts

Many of these tractors still wear Valmet on the bonnet, while parts lists often call the same machine the Valtra 705. It is one and the same type. This page has more than 60 replacement parts for the 705, from GRANIT, MAHLE, VDO, Cobo and HELLA.

Fuel, starting and engine

If the engine is slow to fire or dies under load, the feed pump is a sensible place to start. There are feed pumps and separate feed pump seals. A leaking seal draws in air, which means bleeding the system again after every stop. The stop cable is here as well: one that drags or no longer springs back fully can keep the engine from shutting off cleanly.

For starting and charging there are starter motors, alternators and connection cables. On the engine itself you will find a rear crankshaft seal, radiator hoses and a coolant temperature sensor, so the gauge reads correctly again.

Brakes, clutch and steering

For the brakes there are wheel brake cylinders and repair kits for the brake cylinder. A repair kit makes sense as long as the bore is smooth. Once pitting or rust shows inside, a complete new cylinder is the better choice. The clutch side has a clutch plate, and for the steering there are ball joints.

The electrical parts also include a flasher unit with holder and a headlight.

A tip on the crankshaft seal

Oil at the bottom between engine and clutch housing may well come from the rear crankshaft seal. Replace it while the clutch is out anyway, when it is only a small extra job. Check the running surface on the crankshaft: if there is a groove, set the new seal slightly deeper or shallower so the lip runs on a clean surface. Oil the lip lightly with engine oil and press the seal in straight and evenly. A seal fitted at an angle soon leaks again, and the oil ends up on your new clutch plate.

Finding the matching part

The type plate tells you whether the tractor is a 705, sometimes still under the Valmet name. Then compare the number on the old part with the description on this page. For a stop cable, measure the length of the old one, and for a radiator hose note whether it is the upper or lower.

The 705 belongs to the 05 series from Valtra and Valmet. The other types in that series each have their own page:

Brand-wide items are under Valtra parts.

Brands
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart