Menu
EUR

Valtra 705 tractor parts & technical data

Valtra 705 or Valmet 705, this page covers both names. Browse more than 60 parts, including electrics, lighting and components for steering and front axle.

66 parts found for Valtra-Valmet 705
Show:
GRANIT Oil pressure switch engine and transmission M10 x 1, 0,15 - 0,45 bar
GRANIT
Oil pressure switch engine and transmission M10 x 1, 0,15 - 0,45 bar
Version: Thread: M10 x 1 cylindrical, Switching pressure: 0.15 - 0.45 bar, Blade...
€26,20 €21,65
 
GRANIT Toggle switch lighting black lever, 4 blade connections
GRANIT
Toggle switch lighting black lever, 4 blade connections
Version: For lighting, 4 blade terminals 6.3 mm.
€31,00 €25,62
 
VDO Coolant temperature sensor M14 x 1,5, +40 - +120 °C, 98 °C
10%
VDO
Coolant temperature sensor M14 x 1,5, +40 - +120 °C, 98 °C
Version: Temperature measuring range: +40°C to +120°C, Thread: M14 x 1.5, Resist...
€163,00 €134,71 €147,45 €121,86
 
Alternator 14 V / 65 A, form A, flange 86,0 mm, pulley-Ø 90,0 mm
10%
Alternator 14 V / 65 A, form A, flange 86,0 mm, pulley-Ø 90,0 mm
To fit as: Ford, Lindner, Valtra-Valmet
€240,62 €198,86 €217,70 €179,92
 
GRANIT Ball joint right and left M16 x 1,5, M24 x 1,5, taper 18 - 20 mm
5%
GRANIT
Ball joint right and left M16 x 1,5, M24 x 1,5, taper 18 - 20 mm
A: 105 mm. C: M16 x 1,5 mm. D: M24 x 1,5 mm. E: 18 mm. F: 20 mm. Taper: 18 - 20 ...
€38,21 €31,58 €36,25 €29,96
 
GRANIT Ball joint 220 mm, M22 x 1,5, M22 x 1,5, taper 23,5 - 26,4 mm
5%
GRANIT
Ball joint 220 mm, M22 x 1,5, M22 x 1,5, taper 23,5 - 26,4 mm
A: 220 mm. C: M22 x 1,5 mm. D: M22 x 1,5 mm. E: 23,5 mm. F: 26,4 mm. Taper: 23,5...
€79,46 €65,67 €75,45 €62,36
 
GRANIT Ball joint 522 mm, M16 x 1,5, 22 mm
5%
GRANIT
Ball joint 522 mm, M16 x 1,5, 22 mm
A: 522 mm. C: M16 x 1,5 mm. D: 22 mm. E: 18 mm. F: 20,2 mm. Taper: 18 - 20,2 mm.
€66,14 €54,66 €62,80 €51,90
 
Starter ring gear Ø 405/373 mm, 133 teeth Valtra-Valmet
5%
Starter ring gear Ø 405/373 mm, 133 teeth Valtra-Valmet
Version: Ø 405/373 mm, 133 teeth.
€215,16 €177,82 €204,40 €168,93
 
GRANIT Feed pump 3 hole, hole spacing 52 x 34 mm, flange 23 mm
5%
GRANIT
Feed pump 3 hole, hole spacing 52 x 34 mm, flange 23 mm
Version: 3 holes, Vertical hole spacing: 52 mm, Horizontal hole spacing: 34 mm, ...
€116,04 €95,90 €110,20 €91,07
 
GRANIT Radiator Valtra-Valmet 505-855, engine Sisu 311, 411
5%
GRANIT
Radiator Valtra-Valmet 505-855, engine Sisu 311, 411
To fit as: Valtra-Valmet Engine Sisu: 311, 411; Series 05: 505, 605, 705, 805; S...
€557,51 €460,75 €529,60 €437,69
 
GRANIT Radiator filler cap grommet-Ø 57 mm, height 25 mm
GRANIT
Radiator filler cap grommet-Ø 57 mm, height 25 mm
Neck Ø: 57 mm. Height: 25 mm.
€24,15 €19,96
 
GRANIT Start switch 12 V, Ø 26 mm - 1 key
10%
GRANIT
Start switch 12 V, Ø 26 mm - 1 key
Version: 12 V, with blade terminal, 0: off, 1: consumer, 2: preheat, 3: start, M...
€253,74 €209,70 €229,55 €189,71
 
Stop cable 2015 / 2250 mm Valtra-Valmet 205-905, 6000-8750
Stop cable 2015 / 2250 mm Valtra-Valmet 205-905, 6000-8750
To fit as: Valtra - Valmet 205, 305, 365, 405, 465, 505, 600, 605, 665, 700, 705...
€32,75 €27,07
 
GRANIT Clutch plate 310 sintered 41 x 45 mm, 22 splines Valtra-Valmet
5%
GRANIT
Clutch plate 310 sintered 41 x 45 mm, 22 splines Valtra-Valmet
Dimensions (mm): 41 x 45 22 grooves | Material specifications: Sintered clutch l...
€212,11 €175,30 €201,50 €166,53
 
Clutch plate single clutch 1020 - 1140 Kp, flywheel flat
5%
Clutch plate single clutch 1020 - 1140 Kp, flywheel flat
Contact pressure (Kp): 1020 - 1140 | Flywheel design: Flat | Additional informat...
€216,35 €178,80 €205,50 €169,83
 
LUK Thrust bearing driving clutch 60 x 97 x 26 Fendt, Landini, Valtra-Valmet
5%
LUK
Thrust bearing driving clutch 60 x 97 x 26 Fendt, Landini, Valtra-Valmet
Dimensions (mm): 60 x 97 x 26
€126,81 €104,80 €120,45 €99,55
 
MAHLE Starter motor 12 V, 3,0 kW, 11 teeth, mounting Ø 89 mm, mounting angle r 45
38%
MAHLE
Starter motor 12 V, 3,0 kW, 11 teeth, mounting Ø 89 mm, mounting angle r 45
€484,86 €400,71 €303,00 €250,41
 
Wheel brake cylinder Ø 34,92 mm, DOT 4, with piston rod Steyr 667, 680
5%
Wheel brake cylinder Ø 34,92 mm, DOT 4, with piston rod Steyr 667, 680
Medium: DOT4. Hole Ø: 34.92 mm. Additional information: With piston rod.
€171,88 €142,05 €163,25 €134,92
 
GRANIT Repair set clutch cylinder Valtra-Valmet, Steyr
5%
GRANIT
Repair set clutch cylinder Valtra-Valmet, Steyr
€52,15 €43,10 €49,50 €40,91
 
GRANIT Installation cable mini-contact plug 1 m
5%
GRANIT
Installation cable mini-contact plug 1 m
Length: 1 m. Technical data: Closure: 1.0 m. Reference no.: 1762510.
€163,94 €135,49 €155,70 €128,68
 
GRANIT Seal water pump Fendt, Massey Ferguson
GRANIT
Seal water pump Fendt, Massey Ferguson
€10,50 €8,68
 
GRANIT Seal feed pump Valtra-Valmet, Steyr, Case IH
GRANIT
Seal feed pump Valtra-Valmet, Steyr, Case IH
€21,35 €17,64
 
Showing 25 - 48 of 66

Valmet 705 and Valtra 705 parts

Many of these tractors still wear Valmet on the bonnet, while parts lists often call the same machine the Valtra 705. It is one and the same type. This page has more than 60 replacement parts for the 705, from GRANIT, MAHLE, VDO, Cobo and HELLA.

Fuel, starting and engine

If the engine is slow to fire or dies under load, the feed pump is a sensible place to start. There are feed pumps and separate feed pump seals. A leaking seal draws in air, which means bleeding the system again after every stop. The stop cable is here as well: one that drags or no longer springs back fully can keep the engine from shutting off cleanly.

For starting and charging there are starter motors, alternators and connection cables. On the engine itself you will find a rear crankshaft seal, radiator hoses and a coolant temperature sensor, so the gauge reads correctly again.

Brakes, clutch and steering

For the brakes there are wheel brake cylinders and repair kits for the brake cylinder. A repair kit makes sense as long as the bore is smooth. Once pitting or rust shows inside, a complete new cylinder is the better choice. The clutch side has a clutch plate, and for the steering there are ball joints.

The electrical parts also include a flasher unit with holder and a headlight.

A tip on the crankshaft seal

Oil at the bottom between engine and clutch housing may well come from the rear crankshaft seal. Replace it while the clutch is out anyway, when it is only a small extra job. Check the running surface on the crankshaft: if there is a groove, set the new seal slightly deeper or shallower so the lip runs on a clean surface. Oil the lip lightly with engine oil and press the seal in straight and evenly. A seal fitted at an angle soon leaks again, and the oil ends up on your new clutch plate.

Finding the matching part

The type plate tells you whether the tractor is a 705, sometimes still under the Valmet name. Then compare the number on the old part with the description on this page. For a stop cable, measure the length of the old one, and for a radiator hose note whether it is the upper or lower.

The 705 belongs to the 05 series from Valtra and Valmet. The other types in that series each have their own page:

Brand-wide items are under Valtra parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart