Menu
EUR

Valtra 8400 tractor parts & technical data

Also known as the Valmet 8400: for the Valtra 8400 this page lists more than 170 parts such as steering and front axle, electrics and trailer couplings.

157 parts found for Valtra-Valmet 8400
Show:
Thermostat Ø 54 mm, 79 °C
Thermostat Ø 54 mm, 79 °C
Ø: 54 mm. Temperature: 79 °C. More
Ø: 54 mm. Temperature: 79 °C.
Add to wishlist
€18,95 €15,66
Feed pump 5 hole, hole spacing 25/37 and 45 mm, flange 52 mm
Feed pump 5 hole, hole spacing 25/37 and 45 mm, flange 52 mm
Version: 5 holes, Vertical hole spacing: 25/37 mm, Horizontal hole spacing: 45 mm, Flange to lever end: 52 mm. Menke no.: 209000. More
Version: 5 holes, Vertical hole spacing: 25/37 mm, Horizontal hole spa...
Add to wishlist
€42,99 €35,53 €40,80 €33,72
You save 5%
GRANIT Connecting rod bolt 85 mm Valtra-Valmet, Case IH, Steyr
GRANIT
Connecting rod bolt 85 mm Valtra-Valmet, Case IH, Steyr
Dimensions: 85 mm long. More
Dimensions: 85 mm long.
Add to wishlist
€40,74 €33,67 €38,70 €31,98
You save 5%
Piston ring set 3 rings Ø 108 mm, 3 mm trapezoidal ring / 3 mm / 4 mm
Piston ring set 3 rings Ø 108 mm, 3 mm trapezoidal ring / 3 mm / 4 mm
Dimensions: 3 rings, Ø 108 mm, 3 mm (trapezoidal ring) / 3 mm / 4 mm. More
Dimensions: 3 rings, Ø 108 mm, 3 mm (trapezoidal ring) / 3 mm / 4 mm.
Add to wishlist
€46,69 €38,59 €44,35 €36,65
You save 5%
O-ring feed pump Massey Ferguson, Case IH, Steyr
O-ring feed pump Massey Ferguson, Case IH, Steyr
Add to wishlist
€6,35 €5,25
Intake manifold gasket Massey Ferguson, Case IH, Steyr, New Holland
Intake manifold gasket Massey Ferguson, Case IH, Steyr, New Holland
Add to wishlist
€52,11 €43,07 €49,50 €40,91
You save 5%
Bosch/Rexroth Double pump 25 + 11 cm³/rpm., left, Valmet spline DIN 5480
Bosch/Rexroth
Double pump 25 + 11 cm³/rpm., left, Valmet spline DIN 5480
Output volume: 25 + 11 cc/rev. Drive shaft: Special Valmet splining DIN 5480. Direction of rotation: Anticlockwise. Bosch no.: 0510766313. More
Output volume: 25 + 11 cc/rev. Drive shaft: Special Valmet splining DI...
Add to wishlist
€1.286,39 €1.063,13 €1.222,00 €1.009,92
You save 5%
GRANIT Door lock, left Fendt Farmer 240 S (Typ 294), GT 395
GRANIT
Door lock, left Fendt Farmer 240 S (Typ 294), GT 395
Add to wishlist
€56,94 €47,06 €54,00 €44,63
You save 5%
Start switch 12 V, Ø 16,5 mm, lock K 11-2 keys
Start switch 12 V, Ø 16,5 mm, lock K 11-2 keys
Version: 12 V, with 4 blade terminal connections, Switch positions: 0: off, 1: consumer, 2: start, Installation dimension: Ø 16.5 mm, Without preheat... More
Version: 12 V, with 4 blade terminal connections, Switch positions: 0:...
Add to wishlist
€15,45 €12,77
GRANIT Indicator/position light left / right rectangular, 12V21WK / P21W
GRANIT
Indicator/position light left / right rectangular, 12V21WK / P21W
Bulb: 12V21WK / P21W, 12V21/5WK / P21/5W. Form: Rectangular. Installation location: Left/right. Type: Bulb. Light function: With indicator light, with... More
Bulb: 12V21WK / P21W, 12V21/5WK / P21/5W. Form: Rectangular. Installat...
Add to wishlist
€38,95 €32,19
Stop cable 2015 / 2250 mm Valtra-Valmet 205-905, 6000-8750
Stop cable 2015 / 2250 mm Valtra-Valmet 205-905, 6000-8750
To fit as: Valtra - Valmet 205, 305, 365, 405, 465, 505, 600, 605, 665, 700, 705, 805, 865, 900, 905, 6000, 6100, 6300, 6400, 6600, 6800, 8000, 8100, ... More
To fit as: Valtra - Valmet 205, 305, 365, 405, 465, 505, 600, 605, 665...
Add to wishlist
€32,75 €27,07
FTE Clutch master cylinder Ø 25,4 mm, DOT4, gray cast iron Valtra-Valmet
FTE
Clutch master cylinder Ø 25,4 mm, DOT4, gray cast iron Valtra-Valmet
Material: Grey cast iron | Hole Ø (mm): 25.4 | Medium: DOT4 | Additional information: With piston rod More
Material: Grey cast iron | Hole Ø (mm): 25.4 | Medium: DOT4 | Additio...
Add to wishlist
€200,51 €165,71 €190,45 €157,40
You save 5%
Expansion valve airco 1/2 inch o-ring, 35 g
Expansion valve airco 1/2 inch o-ring, 35 g
Weight (g): 35 | Equipment: O-ring | Connection thread A: # 8, 1/2"" O-ring | Connection thread E: - More
Weight (g): 35 | Equipment: O-ring | Connection thread A: # 8, 1/2"" O...
Add to wishlist
€51,81 €42,82 €49,20 €40,66
You save 5%
MAHLE Alternator 14 V, 120 A, flange 56 mm, compact, dust-tight
MAHLE
Alternator 14 V, 120 A, flange 56 mm, compact, dust-tight
Direction of rotation: ↻ | Installation angle (°): l 30 | Pulley Ø (mm): - | Additional information: Compact alternator, dust-tight | Mounting L /... More
Direction of rotation: ↻ | Installation angle (°): l 30 | Pulley Ø...
Add to wishlist
€372,69 €308,01 €232,90 €192,48
You save 38%
Alternator 12 V / 65 A Challenger, JCB, Massey Ferguson, Valtra-Valmet
Alternator 12 V / 65 A Challenger, JCB, Massey Ferguson, Valtra-Valmet
Installation angle (°): l 60 | Charging current (A): 65 | Additional information: Connections B+ (M6-6.3), with W-connection, internal regulator | Di... More
Installation angle (°): l 60 | Charging current (A): 65 | Additional ...
Add to wishlist
€245,47 €202,87 €233,15 €192,69
You save 5%
GRANIT Alternator 14 V, 120 A, flange 56 mm, Fendt, Valtra-Valmet
GRANIT
Alternator 14 V, 120 A, flange 56 mm, Fendt, Valtra-Valmet
Pulley spacing (mm): - | Form: B | Additional information: Compact alternator, dust-tight | Belt tension hole Ø / R (mm): 8,3 / 86,0 | Nominal values... More
Pulley spacing (mm): - | Form: B | Additional information: Compact alt...
Add to wishlist
€263,97 €218,16 €250,75 €207,23
You save 5%
MAHLE Starter motor 12 V, 3,0 kW, 11 teeth, mounting Ø 89 mm, mounting angle r 45
MAHLE
Starter motor 12 V, 3,0 kW, 11 teeth, mounting Ø 89 mm, mounting angle r 45
Add to wishlist
€484,86 €400,71 €303,00 €250,41
You save 38%
Ball joint 295 mm, M24 x 1,5, M22 x 1,5, taper 29 - 32,2 mm
Ball joint 295 mm, M24 x 1,5, M22 x 1,5, taper 29 - 32,2 mm
A: 295 mm. C: M24 x 1,5 mm. D: M22 x 1,5 mm. E: 29 mm. F: 32,2 mm. Taper: 29 - 32,2 mm. More
A: 295 mm. C: M24 x 1,5 mm. D: M22 x 1,5 mm. E: 29 mm. F: 32,2 mm. Tap...
Add to wishlist
€99,37 €82,12 €94,40 €78,02
You save 5%
Wheel brake cylinder Ø 34,92 mm, DOT 4, with piston rod Steyr 667, 680
Wheel brake cylinder Ø 34,92 mm, DOT 4, with piston rod Steyr 667, 680
Medium: DOT4. Hole Ø: 34.92 mm. Additional information: With piston rod. More
Medium: DOT4. Hole Ø: 34.92 mm. Additional information: With piston r...
Add to wishlist
€171,88 €142,05 €163,25 €134,92
You save 5%
GRANIT Brake disc Ø 224 mm, 27 teeth, 4,8 mm thick, organic Valtra-Valmet
GRANIT
Brake disc Ø 224 mm, 27 teeth, 4,8 mm thick, organic Valtra-Valmet
Dimensions: Ø 224, 4.8 thick, 27 splines mm. More
Dimensions: Ø 224, 4.8 thick, 27 splines mm.
Add to wishlist
€72,12 €59,60 €68,50 €56,61
You save 5%
GRANIT Coupling sleeve transmission-input shaft Valtra-Valmet
GRANIT
Coupling sleeve transmission-input shaft Valtra-Valmet
Add to wishlist
€244,50 €202,07 €232,25 €191,94
You save 5%
Scharmüller Adapter plate rail width 335 mm, hole pattern 140 x 80 mm, M20
Scharmüller
Adapter plate rail width 335 mm, hole pattern 140 x 80 mm, M20
Load capacity: 3000 kg. D-value: 89,3 kN. Rail width: 335 mm. Hole pattern: 140 x 80 mm. Guide width: 30 mm. Plate height: 150 mm. Thread: M20. Colour... More
Load capacity: 3000 kg. D-value: 89,3 kN. Rail width: 335 mm. Hole pat...
Add to wishlist
€664,77 €549,40 €587,90 €485,87
You save 12%
VICTOR REINZ Cylinder head gasket set engine 620, 634, 66ET/A, 74ETA Valtra-Valmet
VICTOR REINZ
Cylinder head gasket set engine 620, 634, 66ET/A, 74ETA Valtra-Valmet
Add to wishlist
€353,48 €292,13 €319,80 €264,30
You save 10%
GRANIT Water pump gasket Valtra-Valmet 6900, 8000-8400, T 133 - T 213
GRANIT
Water pump gasket Valtra-Valmet 6900, 8000-8400, T 133 - T 213
Add to wishlist
€9,95 €8,22
Showing 73 - 96 of 157
Brands
  • View more
Price
Min Max
Close
© Copyright 2026 Techniek Totaal
Choose your language
Choose your currency
€

My account

Forgot your password?
or

Recently added

Total incl. tax
€0,00
View cart (0) Proceed to checkout
0
Compare
Start comparison

This product has been added to your cart
Proceed to checkout Continue shopping