Menu
EUR

Valtra N 101 tractor parts & technical data

This is the parts page for the Valtra N 101 in the N1 series. It has more than 140 items, including trailer couplings, electrics and lighting.

146 parts found for Valtra-Valmet N 101
Show:
PROBOSS Seat PROBOSS AS4550 air suspended 12 V, 550 mm, seat heater
1%
PROBOSS
Seat PROBOSS AS4550 air suspended 12 V, 550 mm, seat heater
On-board voltage: 12 V. Upholstery type: Fabric. Seat contact switch: Optional. ...
€1.867,44 €1.543,34 €1.839,59 €1.520,32
 
GRAMMER Tractor seat Maximo Dynamic DDS MSG95AL/741 air suspended Steyr
GRAMMER
Tractor seat Maximo Dynamic DDS MSG95AL/741 air suspended Steyr
Suspension: Air suspension. Upholstery type: Fabric. Track gauge: 260 mm. Seat w...
€2.776,81 €2.294,88
 
Scharmüller Adapter plate rail width 335 mm, hole pattern 140 x 80 mm, M20
Scharmüller
Adapter plate rail width 335 mm, hole pattern 140 x 80 mm, M20
Load capacity: 3000 kg. D-value: 89,3 kN. Rail width: 335 mm. Hole pattern: 140 ...
€638,19 €527,43
 
LED headlight dipped beam / main beam 12 / 24 V, 167 x 107 x 78 mm
8%
LED headlight dipped beam / main beam 12 / 24 V, 167 x 107 x 78 mm
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs included:...
€124,12 €102,58 €114,19 €94,37
 
Walterscheid Drawbar manual rail width 330 mm, coupling pin 31 mm, 92 kN
21%
Walterscheid
Drawbar manual rail width 330 mm, coupling pin 31 mm, 92 kN
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 31 ...
€1.104,81 €913,07 €873,47 €721,88
 
DANA Spicer Plug front axle 745
DANA Spicer
Plug front axle 745
€20,26 €16,75
 
Scharmüller Drawbar frame prepared for drawbar 71,9 kN, 2000 kg, rail 335 mm
4%
Scharmüller
Drawbar frame prepared for drawbar 71,9 kN, 2000 kg, rail 335 mm
Version: Prepared for drawbar | Detent pin Ø (mm): 22 | Load capacity (kg): 2000...
€1.275,80 €1.054,38 €1.223,74 €1.011,36
 
Wabco Trailer control valve 8 bar, M22 x 1,5, NW 10 mm
8%
Wabco
Trailer control valve 8 bar, M22 x 1,5, NW 10 mm
Working pressure (bar): 8 | Connection: M22 x 1.5 | Nominal width (mm): 10
€630,05 €520,70 €579,65 €479,05
 
Start switch 12 V, Ø 16,5 mm, lock K 11-2 keys
Start switch 12 V, Ø 16,5 mm, lock K 11-2 keys
Version: 12 V, with 4 blade terminal connections, Switch positions: 0: off, 1: c...
€16,13 €13,33
 
Walterscheid Ball hitch K80 330 / 25 / 32 mm, 2800 kg, 97,1 kN
19%
Walterscheid
Ball hitch K80 330 / 25 / 32 mm, 2800 kg, 97,1 kN
Quick height adjustment with rotation lock, load capacity up to 40 km/h 2800 kg,...
€2.111,26 €1.744,84 €1.719,18 €1.420,81
 
Gear wheel main shaft 31 teeth Valtra-Valmet
8%
Gear wheel main shaft 31 teeth Valtra-Valmet
Number of teeth: 31.
€423,24 €349,79 €389,38 €321,80
 
BOSCH High-pressure pump CP1H Fendt, Massey Ferguson, Valtra-Valmet
15%
BOSCH
High-pressure pump CP1H Fendt, Massey Ferguson, Valtra-Valmet
€1.964,66 €1.623,69 €1.665,11 €1.376,13
 
Cobo Contact switch mechanical brake light, clutch, PTO shaft, 12 / 24 V
8%
Cobo
Contact switch mechanical brake light, clutch, PTO shaft, 12 / 24 V
Version: For brake light, clutch, four-wheel drive, PTO, 12/24 V, power rating: ...
€32,65 €26,98 €30,04 €24,82
 
Scharmüller Support plate Piton Fix manual, 445 x 220 x 40 mm, 3 ton, AGCO gray
8%
Scharmüller
Support plate Piton Fix manual, 445 x 220 x 40 mm, 3 ton, AGCO gray
D-value (kN): 71,9 | Category: Support plates | Lock: Piton Fix manual | Version...
€987,09 €815,78 €908,12 €750,51
 
Wiper motor Massey Ferguson, Valtra-Valmet
8%
Wiper motor Massey Ferguson, Valtra-Valmet
€223,30 €184,55 €205,44 €169,78
 
Filter dryer Ø 76 mm, 228 mm, connection thread M
8%
Filter dryer Ø 76 mm, 228 mm, connection thread M
Outer Ø (mm): 76 | Connection: O-ring A = male thread 3/8"" - 18UNF O-ring B = m...
€63,79 €52,72 €58,69 €48,50
 
Expansion valve airco 1/2 inch o-ring, 35 g
8%
Expansion valve airco 1/2 inch o-ring, 35 g
Weight (g): 35 | Equipment: O-ring | Connection thread A: # 8, 1/2"" O-ring | Co...
€54,07 €44,69 €49,74 €41,11
 
LUK Clutch plate TZFA organic torsiegeveerd 41 x 45 mm, 22 splines
8%
LUK
Clutch plate TZFA organic torsiegeveerd 41 x 45 mm, 22 splines
Dimensions (mm): 41 x 45 22 grooves | Material specifications: Organic clutch li...
€519,27 €429,15 €477,73 €394,82
 
Gear wheel planetary set rear axle 82 teeth Valtra-Valmet
8%
Gear wheel planetary set rear axle 82 teeth Valtra-Valmet
Number of teeth: 82.
€894,96 €739,64 €823,36 €680,47
 
Coupling sleeve transmission-input shaft Valtra-Valmet
8%
Coupling sleeve transmission-input shaft Valtra-Valmet
€255,14 €210,86 €234,73 €193,99
 
Cobo Flasher unit 12 V, 2+1+1 / 8 x 21 W, 6 connections, with holder
8%
Cobo
Flasher unit 12 V, 2+1+1 / 8 x 21 W, 6 connections, with holder
Version: 12 V / 2 + 1 + 1 x 21 / 8 x 21 W, With bracket, With hazard warning lig...
€58,12 €48,03 €53,47 €44,19
 
Walterscheid Adapter plate rail width 330 mm, hole pattern 160 x 100 mm, M21
21%
Walterscheid
Adapter plate rail width 330 mm, hole pattern 160 x 100 mm, M21
Guide width (mm): 32 | Description: The coupling plate is a height-adjustable sl...
€1.207,08 €997,59 €954,33 €788,70
 
FTE Clutch master cylinder Ø 25,4 mm, DOT4, gray cast iron Valtra-Valmet
8%
FTE
Clutch master cylinder Ø 25,4 mm, DOT4, gray cast iron Valtra-Valmet
Material: Grey cast iron | Hole Ø (mm): 25.4 | Medium: DOT4 | Additional informa...
€209,23 €172,92 €192,49 €159,08
 
Scharmüller Drawbar ball 50, rail 200 mm, pin Ø 16 mm, 150 kg
8%
Scharmüller
Drawbar ball 50, rail 200 mm, pin Ø 16 mm, 150 kg
Rail width: 200 mm. Guide width: 25 mm. Detent pin Ø: 16 mm. Load capacity: 150 ...
€583,34 €482,10 €536,67 €443,53
 
GRAMMER Tractor seat air suspended Maximo Professional fabric, seat width 530 mm
GRAMMER
Tractor seat air suspended Maximo Professional fabric, seat width 530 mm
Super comfort seat with low-frequency air suspension and 12V compressor. APS: au...
€1.991,23 €1.645,64
 
LUK Torsion damper Valtra-Valmet C90 - C150, M120 - M150, N82 - N142
8%
LUK
Torsion damper Valtra-Valmet C90 - C150, M120 - M150, N82 - N142
€801,39 €662,31 €737,28 €609,32
 
MAHLE Alternator 14 V, 120 A, flange 56 mm, compact, dust-tight
40%
MAHLE
Alternator 14 V, 120 A, flange 56 mm, compact, dust-tight
Direction of rotation: ↻ | Installation angle (°): l 30 | Pulley Ø (mm): - | Add...
€388,90 €321,41 €232,93 €192,50
 
Turbocharger Case IH CS 78-110, Steyr, Valtra-Valmet
4%
Turbocharger Case IH CS 78-110, Steyr, Valtra-Valmet
€1.328,18 €1.097,67 €1.272,81 €1.051,91
 
Gas strut door 250 N, 345 mm, stroke 126 mm Massey Ferguson 4745ZN
8%
Gas strut door 250 N, 345 mm, stroke 126 mm Massey Ferguson 4745ZN
suitable for: Tür. Newtons: 250. A: 345 mm. B: 175 mm. C: 8 mm. D: 8 mm. Form: 2...
€34,26 €28,31 €31,52 €26,05
 
Hydraulic lifting strut 540 - 650 mm, clevis / ball joint
8%
Hydraulic lifting strut 540 - 650 mm, clevis / ball joint
D (mm): 70 | C (mm): 35 | L (mm): 540 - 650 | To fit: Valtra & Valmet | Type: Cl...
€643,17 €531,55 €591,72 €489,02
 
SANDEN Aircon compressor SD7H15 12 V, pulley Ø 132 mm, 2 grooves Valtra-Valmet
8%
SANDEN
Aircon compressor SD7H15 12 V, pulley Ø 132 mm, 2 grooves Valtra-Valmet
Oil quantity (ccm): 135 | Suitable oil: SP - 10 | Refrigerant: R 134a | Connecti...
€586,48 €484,69 €539,56 €445,92
 
Clutches set 7+7 Valtra-Valmet 6250 - 8950, C90 - XM150
8%
Clutches set 7+7 Valtra-Valmet 6250 - 8950, C90 - XM150
€171,21 €141,50 €157,51 €130,18
 
DANA Spicer Wheel hub final drive front axle 730
DANA Spicer
Wheel hub final drive front axle 730
€408,30 €337,44
 
DANA Spicer Hollow wheel carrier final drive front axle 212, 5,22 kg
DANA Spicer
Hollow wheel carrier final drive front axle 212, 5,22 kg
€513,07 €424,03
 
GRAMMER Tractor seat Maximo Professional MSG95AL/731 air suspended
GRAMMER
Tractor seat Maximo Professional MSG95AL/731 air suspended
Suspension: Air suspension. Upholstery type: Fabric. Seat contact switch: Option...
€3.917,46 €3.237,57
 
LUK Central release bearing 2 connections 45,5 x 95 x 105 mm
8%
LUK
Central release bearing 2 connections 45,5 x 95 x 105 mm
Dimensions (mm): 45.5 x 95 x 105
€486,06 €401,70 €447,18 €369,57
 
Alternator 14 V, 120 A, flange 56 mm, Fendt, Valtra-Valmet
8%
Alternator 14 V, 120 A, flange 56 mm, Fendt, Valtra-Valmet
Pulley spacing (mm): - | Form: B | Additional information: Compact alternator, d...
€275,46 €227,65 €253,42 €209,44
 
Clutches set 9+9 Valtra-Valmet 6250 - 8950, C90 - XM150
8%
Clutches set 9+9 Valtra-Valmet 6250 - 8950, C90 - XM150
€230,48 €190,48 €212,04 €175,24
 
SACHS Shock absorber rear, gas pressure MSE27/13X47A2 Valtra-Valmet
8%
SACHS
Shock absorber rear, gas pressure MSE27/13X47A2 Valtra-Valmet
Dimensions (mm): MSE27/13X47A2 | Installation location: Rear | Design: Gas press...
€698,55 €577,31 €642,67 €531,13
 
DANA Spicer Differential bevel gear final drive front axle 730
8%
DANA Spicer
Differential bevel gear final drive front axle 730
€244,50 €202,07 €224,94 €185,90
 
DANA Spicer Guard plate differential front axle 745
DANA Spicer
Guard plate differential front axle 745
€17,09 €14,12
 
DANA Spicer Grooved nut bevel gear differential front axle 730
8%
DANA Spicer
Grooved nut bevel gear differential front axle 730
€82,27 €67,99 €75,69 €62,55
 
MAHLE Gear reduction starter 3,2 kW, 11 teeth clockwise, 204,3 mm, Ø 89 mm
40%
MAHLE
Gear reduction starter 3,2 kW, 11 teeth clockwise, 204,3 mm, Ø 89 mm
€548,46 €453,27 €328,50 €271,49
 
Gear reduction starter 12 V, 4,2 kW, 11 teeth, 226 mm, clockwise
8%
Gear reduction starter 12 V, 4,2 kW, 11 teeth, 226 mm, clockwise
€331,16 €273,69 €304,67 €251,79
 
Synchro ring reversing gear Valtra-Valmet
8%
Synchro ring reversing gear Valtra-Valmet
€521,59 €431,07 €479,86 €396,58
 
Reman turbocharger Valtra-Valmet, Steyr, Case IH
4%
Reman turbocharger Valtra-Valmet, Steyr, Case IH
€1.024,99 €847,10 €982,26 €811,79
 
Scharmüller Drawbar frame 10 kN, rail width 200 mm, nose weight 350 kg
8%
Scharmüller
Drawbar frame 10 kN, rail width 200 mm, nose weight 350 kg
Version: Standard | Category: Bearing supports | Guide width (mm): 25 | Rail wid...
€668,46 €552,45 €614,98 €508,25
 
Showing 1 - 48 of 146

Valtra N 101 parts for turbo, engine and lighting

Blue smoke or a whistle under acceleration on a Valtra N 101 often means the turbo or a seal on the exhaust side has had its day. This page lists more than 140 parts for the N 101, from GRANIT and from brands such as DANA Spicer, Scharmüller, Walterscheid and GRAMMER.

Turbo and engine

For the engine there are remanufactured turbochargers, exhaust manifold seals at the turbo, upper engine seal kits, crankshaft seals and complete pistons. Radiator hoses cover the cooling side.

Before a new turbocharger goes on, change the engine oil and filter and prime the turbo through the oil feed with clean oil. Let the engine idle for a moment without touching the throttle, so the bearings are lubricated before the turbo spins up. Always fit a new seal between manifold and turbo, as a used one will leak and whistle.

A radiator hose that cracks near the clamps or feels hard should come off before it gives up on a hot day, ideally with new clamps.

Lights and indicators

Lighting parts include H4 headlights, LED headlights with dipped and main beam, flood beam work lamps and a flasher unit. If the indicators suddenly flash twice as fast, a bulb on that side has usually failed or a holder has poor contact. Only when every bulb and earth point checks out is the flasher unit itself the suspect.

Switching to LED headlights puts more light on the road while drawing less current. Aim them properly after fitting so you do not dazzle oncoming traffic.

Cab, air conditioning and hitch

Door locks and a tractor seat fit the cab, and there is an aircon compressor for the climate system. Run the air conditioning for a few minutes now and then during winter, which keeps the compressor seals supple and saves you a leak in spring. A stiff door lock often frees up with a little dry lubricant, but if the door no longer latches securely, a new lock is the safer fix. At the rear you will find ball drawbars and separate balls to replace one that has worn.

Choosing parts for your N 101

Your first step is the serial number on the type plate. Valtra places the N 101 in its N1 range, which helps when a part lists several models. Also take the reference number from the old part and compare it with the product details. For engine parts, the number on the engine block gives extra certainty.

From the same range there are pages for the Valtra N 91, Valtra N 111, Valtra N 121 and Valtra N 141, handy when you look after several Valtra tractors. Everything for the brand is under Valtra parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart