Menu
EUR

Valtra N 111 tractor parts & technical data

Looking for Valtra N 111 parts? We have gathered more than 140 items that fit this tractor, including trailer couplings, electrics and lighting.

143 parts found for Valtra-Valmet N 111
Show:
PROBOSS Seat PROBOSS AS4550 air suspended 12 V, 550 mm, seat heater
1%
PROBOSS
Seat PROBOSS AS4550 air suspended 12 V, 550 mm, seat heater
On-board voltage: 12 V. Upholstery type: Fabric. Seat contact switch: Optional. ...
€1.867,44 €1.543,34 €1.839,59 €1.520,32
 
GRAMMER Tractor seat Maximo Dynamic DDS MSG95AL/741 air suspended Steyr
GRAMMER
Tractor seat Maximo Dynamic DDS MSG95AL/741 air suspended Steyr
Suspension: Air suspension. Upholstery type: Fabric. Track gauge: 260 mm. Seat w...
€2.776,81 €2.294,88
 
Scharmüller Adapter plate rail width 335 mm, hole pattern 140 x 80 mm, M20
Scharmüller
Adapter plate rail width 335 mm, hole pattern 140 x 80 mm, M20
Load capacity: 3000 kg. D-value: 89,3 kN. Rail width: 335 mm. Hole pattern: 140 ...
€638,19 €527,43
 
LED headlight dipped beam / main beam 12 / 24 V, 167 x 107 x 78 mm
8%
LED headlight dipped beam / main beam 12 / 24 V, 167 x 107 x 78 mm
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs included:...
€124,12 €102,58 €114,19 €94,37
 
Walterscheid Drawbar manual rail width 330 mm, coupling pin 31 mm, 92 kN
21%
Walterscheid
Drawbar manual rail width 330 mm, coupling pin 31 mm, 92 kN
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 31 ...
€1.104,81 €913,07 €873,47 €721,88
 
DANA Spicer Plug front axle 745
DANA Spicer
Plug front axle 745
€20,26 €16,75
 
Scharmüller Drawbar frame prepared for drawbar 71,9 kN, 2000 kg, rail 335 mm
4%
Scharmüller
Drawbar frame prepared for drawbar 71,9 kN, 2000 kg, rail 335 mm
Version: Prepared for drawbar | Detent pin Ø (mm): 22 | Load capacity (kg): 2000...
€1.275,80 €1.054,38 €1.223,74 €1.011,36
 
Wabco Trailer control valve 8 bar, M22 x 1,5, NW 10 mm
8%
Wabco
Trailer control valve 8 bar, M22 x 1,5, NW 10 mm
Working pressure (bar): 8 | Connection: M22 x 1.5 | Nominal width (mm): 10
€630,05 €520,70 €579,65 €479,05
 
Start switch 12 V, Ø 16,5 mm, lock K 11-2 keys
Start switch 12 V, Ø 16,5 mm, lock K 11-2 keys
Version: 12 V, with 4 blade terminal connections, Switch positions: 0: off, 1: c...
€16,13 €13,33
 
Walterscheid Ball hitch K80 330 / 25 / 32 mm, 2800 kg, 97,1 kN
19%
Walterscheid
Ball hitch K80 330 / 25 / 32 mm, 2800 kg, 97,1 kN
Quick height adjustment with rotation lock, load capacity up to 40 km/h 2800 kg,...
€2.111,26 €1.744,84 €1.719,18 €1.420,81
 
Gear wheel main shaft 31 teeth Valtra-Valmet
8%
Gear wheel main shaft 31 teeth Valtra-Valmet
Number of teeth: 31.
€423,24 €349,79 €389,38 €321,80
 
BOSCH High-pressure pump CP1H Fendt, Massey Ferguson, Valtra-Valmet
15%
BOSCH
High-pressure pump CP1H Fendt, Massey Ferguson, Valtra-Valmet
€1.964,66 €1.623,69 €1.665,11 €1.376,13
 
Cobo Contact switch mechanical brake light, clutch, PTO shaft, 12 / 24 V
8%
Cobo
Contact switch mechanical brake light, clutch, PTO shaft, 12 / 24 V
Version: For brake light, clutch, four-wheel drive, PTO, 12/24 V, power rating: ...
€32,65 €26,98 €30,04 €24,82
 
Scharmüller Support plate Piton Fix manual, 445 x 220 x 40 mm, 3 ton, AGCO gray
8%
Scharmüller
Support plate Piton Fix manual, 445 x 220 x 40 mm, 3 ton, AGCO gray
D-value (kN): 71,9 | Category: Support plates | Lock: Piton Fix manual | Version...
€987,09 €815,78 €908,12 €750,51
 
Wiper motor Massey Ferguson, Valtra-Valmet
8%
Wiper motor Massey Ferguson, Valtra-Valmet
€223,30 €184,55 €205,44 €169,78
 
Filter dryer Ø 76 mm, 228 mm, connection thread M
8%
Filter dryer Ø 76 mm, 228 mm, connection thread M
Outer Ø (mm): 76 | Connection: O-ring A = male thread 3/8"" - 18UNF O-ring B = m...
€63,79 €52,72 €58,69 €48,50
 
Expansion valve airco 1/2 inch o-ring, 35 g
8%
Expansion valve airco 1/2 inch o-ring, 35 g
Weight (g): 35 | Equipment: O-ring | Connection thread A: # 8, 1/2"" O-ring | Co...
€54,07 €44,69 €49,74 €41,11
 
LUK Clutch plate TZFA organic torsiegeveerd 41 x 45 mm, 22 splines
8%
LUK
Clutch plate TZFA organic torsiegeveerd 41 x 45 mm, 22 splines
Dimensions (mm): 41 x 45 22 grooves | Material specifications: Organic clutch li...
€519,27 €429,15 €477,73 €394,82
 
Gear wheel planetary set rear axle 82 teeth Valtra-Valmet
8%
Gear wheel planetary set rear axle 82 teeth Valtra-Valmet
Number of teeth: 82.
€894,96 €739,64 €823,36 €680,47
 
Coupling sleeve transmission-input shaft Valtra-Valmet
8%
Coupling sleeve transmission-input shaft Valtra-Valmet
€255,14 €210,86 €234,73 €193,99
 
Cobo Flasher unit 12 V, 2+1+1 / 8 x 21 W, 6 connections, with holder
8%
Cobo
Flasher unit 12 V, 2+1+1 / 8 x 21 W, 6 connections, with holder
Version: 12 V / 2 + 1 + 1 x 21 / 8 x 21 W, With bracket, With hazard warning lig...
€58,12 €48,03 €53,47 €44,19
 
Walterscheid Adapter plate rail width 330 mm, hole pattern 160 x 100 mm, M21
21%
Walterscheid
Adapter plate rail width 330 mm, hole pattern 160 x 100 mm, M21
Guide width (mm): 32 | Description: The coupling plate is a height-adjustable sl...
€1.207,08 €997,59 €954,33 €788,70
 
FTE Clutch master cylinder Ø 25,4 mm, DOT4, gray cast iron Valtra-Valmet
8%
FTE
Clutch master cylinder Ø 25,4 mm, DOT4, gray cast iron Valtra-Valmet
Material: Grey cast iron | Hole Ø (mm): 25.4 | Medium: DOT4 | Additional informa...
€209,23 €172,92 €192,49 €159,08
 
Scharmüller Drawbar ball 50, rail 200 mm, pin Ø 16 mm, 150 kg
8%
Scharmüller
Drawbar ball 50, rail 200 mm, pin Ø 16 mm, 150 kg
Rail width: 200 mm. Guide width: 25 mm. Detent pin Ø: 16 mm. Load capacity: 150 ...
€583,34 €482,10 €536,67 €443,53
 
GRAMMER Tractor seat air suspended Maximo Professional fabric, seat width 530 mm
GRAMMER
Tractor seat air suspended Maximo Professional fabric, seat width 530 mm
Super comfort seat with low-frequency air suspension and 12V compressor. APS: au...
€1.991,23 €1.645,64
 
LUK Torsion damper Valtra-Valmet C90 - C150, M120 - M150, N82 - N142
8%
LUK
Torsion damper Valtra-Valmet C90 - C150, M120 - M150, N82 - N142
€801,39 €662,31 €737,28 €609,32
 
MAHLE Alternator 14 V, 120 A, flange 56 mm, compact, dust-tight
40%
MAHLE
Alternator 14 V, 120 A, flange 56 mm, compact, dust-tight
Direction of rotation: ↻ | Installation angle (°): l 30 | Pulley Ø (mm): - | Add...
€388,90 €321,41 €232,93 €192,50
 
Gas strut door 250 N, 345 mm, stroke 126 mm Massey Ferguson 4745ZN
8%
Gas strut door 250 N, 345 mm, stroke 126 mm Massey Ferguson 4745ZN
suitable for: Tür. Newtons: 250. A: 345 mm. B: 175 mm. C: 8 mm. D: 8 mm. Form: 2...
€34,26 €28,31 €31,52 €26,05
 
Hydraulic lifting strut 540 - 650 mm, clevis / ball joint
8%
Hydraulic lifting strut 540 - 650 mm, clevis / ball joint
D (mm): 70 | C (mm): 35 | L (mm): 540 - 650 | To fit: Valtra & Valmet | Type: Cl...
€643,17 €531,55 €591,72 €489,02
 
SANDEN Aircon compressor SD7H15 12 V, pulley Ø 132 mm, 2 grooves Valtra-Valmet
8%
SANDEN
Aircon compressor SD7H15 12 V, pulley Ø 132 mm, 2 grooves Valtra-Valmet
Oil quantity (ccm): 135 | Suitable oil: SP - 10 | Refrigerant: R 134a | Connecti...
€586,48 €484,69 €539,56 €445,92
 
Clutches set 7+7 Valtra-Valmet 6250 - 8950, C90 - XM150
8%
Clutches set 7+7 Valtra-Valmet 6250 - 8950, C90 - XM150
€171,21 €141,50 €157,51 €130,18
 
DANA Spicer Wheel hub final drive front axle 730
DANA Spicer
Wheel hub final drive front axle 730
€408,30 €337,44
 
DANA Spicer Hollow wheel carrier final drive front axle 212, 5,22 kg
DANA Spicer
Hollow wheel carrier final drive front axle 212, 5,22 kg
€513,07 €424,03
 
LUK Central release bearing 2 connections 45,5 x 95 x 105 mm
8%
LUK
Central release bearing 2 connections 45,5 x 95 x 105 mm
Dimensions (mm): 45.5 x 95 x 105
€486,06 €401,70 €447,18 €369,57
 
Alternator 14 V, 120 A, flange 56 mm, Fendt, Valtra-Valmet
8%
Alternator 14 V, 120 A, flange 56 mm, Fendt, Valtra-Valmet
Pulley spacing (mm): - | Form: B | Additional information: Compact alternator, d...
€275,46 €227,65 €253,42 €209,44
 
Clutches set 9+9 Valtra-Valmet 6250 - 8950, C90 - XM150
8%
Clutches set 9+9 Valtra-Valmet 6250 - 8950, C90 - XM150
€230,48 €190,48 €212,04 €175,24
 
SACHS Shock absorber rear, gas pressure MSE27/13X47A2 Valtra-Valmet
8%
SACHS
Shock absorber rear, gas pressure MSE27/13X47A2 Valtra-Valmet
Dimensions (mm): MSE27/13X47A2 | Installation location: Rear | Design: Gas press...
€698,55 €577,31 €642,67 €531,13
 
DANA Spicer Differential bevel gear final drive front axle 730
8%
DANA Spicer
Differential bevel gear final drive front axle 730
€244,50 €202,07 €224,94 €185,90
 
DANA Spicer Guard plate differential front axle 745
DANA Spicer
Guard plate differential front axle 745
€17,09 €14,12
 
DANA Spicer Grooved nut bevel gear differential front axle 730
8%
DANA Spicer
Grooved nut bevel gear differential front axle 730
€82,27 €67,99 €75,69 €62,55
 
MAHLE Gear reduction starter 3,2 kW, 11 teeth clockwise, 204,3 mm, Ø 89 mm
40%
MAHLE
Gear reduction starter 3,2 kW, 11 teeth clockwise, 204,3 mm, Ø 89 mm
€548,46 €453,27 €328,50 €271,49
 
Gear reduction starter 12 V, 4,2 kW, 11 teeth, 226 mm, clockwise
8%
Gear reduction starter 12 V, 4,2 kW, 11 teeth, 226 mm, clockwise
€331,16 €273,69 €304,67 €251,79
 
Synchro ring reversing gear Valtra-Valmet
8%
Synchro ring reversing gear Valtra-Valmet
€521,59 €431,07 €479,86 €396,58
 
Scharmüller Drawbar frame 10 kN, rail width 200 mm, nose weight 350 kg
8%
Scharmüller
Drawbar frame 10 kN, rail width 200 mm, nose weight 350 kg
Version: Standard | Category: Bearing supports | Guide width (mm): 25 | Rail wid...
€668,46 €552,45 €614,98 €508,25
 
PTO shaft end piece 1 3/8 inch, 6 splines, 245 mm Valtra-Valmet
8%
PTO shaft end piece 1 3/8 inch, 6 splines, 245 mm Valtra-Valmet
Version: 1 3/8"", 6 grooves | Length (mm): 245
€415,22 €343,16 €382,00 €315,70
 
PTO shaft end piece 1 3/8 inch, 6 splines Valtra-Valmet
8%
PTO shaft end piece 1 3/8 inch, 6 splines Valtra-Valmet
Version: 1 3/8"", 6 grooves
€206,82 €170,93 €190,27 €157,25
 
CARLISLE External plate Hi-Lo 1,5 mm, inner 98,9 mm, outer 142,5 mm, 6 teeth
CARLISLE
External plate Hi-Lo 1,5 mm, inner 98,9 mm, outer 142,5 mm, 6 teeth
Version: thickness = 1,5 mm inner = 98,9 mm outer = 142,5 mm 6 teeth
€17,19 €14,20
 
Showing 1 - 48 of 143

Valtra N 111 parts for engine work, cab and lights

Pistons, a door lock, a headlight that has packed up: for the Valtra N 111 this page holds more than 140 parts that fit this tractor, from GRANIT, DANA Spicer, Scharmüller, Walterscheid and Cobo among others.

Cab and electrics

When the door no longer latches, a new door lock is the fix. While fitting it, check the striker on the frame as well, because a worn striker will make even a new lock rattle. On the lighting side there are headlights, LED headlights and flood beam work lamps. If the indicators start flashing irregularly, the flasher unit is a likely cause, and it comes with a holder. An engine speed sensor and the aircon compressor are also listed.

Taking the engine apart

A bigger engine job calls for pistons, cylinder head bolts, crankshaft seals and seal kits for the upper engine. There is a seal for the exhaust manifold at the turbocharger, a joint that gives itself away with soot marks and a whistling sound when it leaks. For the cooling system you will find radiator hoses, such as the top hose to the radiator.

Radiator hoses go soft on the inside before it shows on the outside. With the engine cold, give the top hose a firm squeeze at the next service. If it feels spongy or shows fine cracks near the clamps, replace it straight away along with new hose clips.

Workshop tip: always fit new cylinder head bolts when the head goes back on. Bolts of this kind stretch slightly as they are tightened, and they will not reach the correct clamping force a second time. Tighten them in stages and in the specified sequence, working from the centre outwards.

At the rear

For towing there are drawbars with a ball and separate balls. Inspect a ball hitch regularly for wear, since a worn ball creates play and knocking on the road.

Choosing the right one

Start with the type plate on the tractor to confirm you are dealing with an N 111. Then look at the old part itself. Radiator hoses, sensors and seal kits often carry a reference number that you can hold against the description in the shop. When that number matches, you have the right part.

The N 111 belongs to a family of related models, and each one has a page showing only what belongs to that type. For the smaller tractors, see the Valtra N 91 and the Valtra N 101. The larger ones are the Valtra N 121 and the Valtra N 141. Own a second Valtra besides the N 111? Head to Valtra parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart