Menu
EUR

Valtra N 122 tractor parts & technical data

Looking for parts for a Valtra N 122 from the N2 series? This page lists more than 110 items, including trailer couplings, lighting and electrics.

110 parts found for Valtra-Valmet N 122
Show:
MAHLE Gear reduction starter 3,2 kW, 11 teeth clockwise, 204,3 mm, Ø 89 mm
38%
MAHLE
Gear reduction starter 3,2 kW, 11 teeth clockwise, 204,3 mm, Ø 89 mm
€525,60 €434,38 €328,45 €271,45
 
LED headlight dipped beam / main beam 12 / 24 V, 167 x 107 x 78 mm
10%
LED headlight dipped beam / main beam 12 / 24 V, 167 x 107 x 78 mm
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs included:...
€124,89 €103,21 €112,95 €93,35
 
Scharmüller Drawbar frame prepared for drawbar 71,9 kN, 2000 kg, rail 335 mm
Scharmüller
Drawbar frame prepared for drawbar 71,9 kN, 2000 kg, rail 335 mm
Version: Prepared for drawbar | Detent pin Ø (mm): 22 | Load capacity (kg): 2000...
€1.228,70 €1.015,45
 
Belt tensioner Ø 75 mm, width 46,5 mm, Massey Ferguson and Fendt
Belt tensioner Ø 75 mm, width 46,5 mm, Massey Ferguson and Fendt
Outer Ø: 75 mm. Width: 46,5 mm.
€117,20 €96,86
 
Cobo Contact switch mechanical brake light, clutch, PTO shaft, 12 / 24 V
Cobo
Contact switch mechanical brake light, clutch, PTO shaft, 12 / 24 V
Version: For brake light, clutch, four-wheel drive, PTO, 12/24 V, power rating: ...
€39,10 €32,31
 
GRANIT LED work lights spotlight 3600 lm, 36 W, 148 x 95 x 58 mm
10%
GRANIT
LED work lights spotlight 3600 lm, 36 W, 148 x 95 x 58 mm
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs included:...
€78,15 €64,59 €70,70 €58,43
 
Collet set Valtra-Valmet 255-865
Collet set Valtra-Valmet 255-865
€5,45 €4,50
 
Scharmüller Drawbar K50 Cramer, rail 335 mm, pin Ø 22 mm, 31 kN
12%
Scharmüller
Drawbar K50 Cramer, rail 335 mm, pin Ø 22 mm, 31 kN
Rail width: 335 mm. Guide width: 30 mm. Detent pin Ø: 22 mm. Load capacity: 250 ...
€907,50 €750,00 €802,55 €663,26
 
Wabco Trailer control valve 8 bar, M22 x 1,5, NW 10 mm
5%
Wabco
Trailer control valve 8 bar, M22 x 1,5, NW 10 mm
Working pressure (bar): 8 | Connection: M22 x 1.5 | Nominal width (mm): 10
€586,12 €484,40 €556,80 €460,17
 
SACHS Shock absorber rear, gas pressure MSE27/13X47A2 Valtra-Valmet
5%
SACHS
Shock absorber rear, gas pressure MSE27/13X47A2 Valtra-Valmet
Dimensions (mm): MSE27/13X47A2 | Installation location: Rear | Design: Gas press...
€669,43 €553,25 €635,95 €525,58
 
HELLA Headlight left / right 12 / 24 V, H4, glass 164 x 103 mm, built-in Fendt
HELLA
Headlight left / right 12 / 24 V, H4, glass 164 x 103 mm, built-in Fendt
Bulb: 12V60/55W / H4, 12V4WK / T4W, 24V75/70W / H4, 24V4WK / T4W. Fixing: 3-poin...
€103,20 €85,29
 
DANA Spicer Wheel hub final drive front axle 730
DANA Spicer
Wheel hub final drive front axle 730
€408,25 €337,40
 
Inlet valve engine Sisu 320-620
5%
Inlet valve engine Sisu 320-620
€36,60 €30,25 €34,75 €28,72
 
GRANIT Oil drain valve M18 x 1,5
5%
GRANIT
Oil drain valve M18 x 1,5
Thread: M18 x 1.5.
€65,32 €53,98 €62,00 €51,24
 
Door lock, left Massey Ferguson, Case IH, Steyr
5%
Door lock, left Massey Ferguson, Case IH, Steyr
€47,50 €39,26 €45,10 €37,27
 
Walterscheid Adapter plate rail width 330 mm, hole pattern 160 x 100 mm, M21
21%
Walterscheid
Adapter plate rail width 330 mm, hole pattern 160 x 100 mm, M21
Guide width (mm): 32 | Description: The coupling plate is a height-adjustable sl...
€1.214,60 €1.003,80 €954,30 €788,68
 
GRANIT Gear reduction starter 12 V, 4,2 kW, 11 teeth, 226 mm, clockwise
5%
GRANIT
Gear reduction starter 12 V, 4,2 kW, 11 teeth, 226 mm, clockwise
€317,36 €262,28 €301,45 €249,13
 
Scharmüller Drawbar ball 50 rail 335 mm, pin Ø 22 mm, 250 kg, AGCO gray
16%
Scharmüller
Drawbar ball 50 rail 335 mm, pin Ø 22 mm, 250 kg, AGCO gray
Rail width: 335 mm. Guide width: 30 mm. Detent pin Ø: 22 mm. Load capacity: 250 ...
€889,04 €734,74 €748,81 €618,85
 
LUK Torsion damper Valtra-Valmet C90 - C150, M120 - M150, N82 - N142
5%
LUK
Torsion damper Valtra-Valmet C90 - C150, M120 - M150, N82 - N142
€767,99 €634,70 €729,55 €602,93
 
Scharmüller Pick-Up Hitch einsätze 80 shank 60 x 80 mm, 417 mm, bore 26 mm
Scharmüller
Pick-Up Hitch einsätze 80 shank 60 x 80 mm, 417 mm, bore 26 mm
suitable for: Valtra. Series: C-Serie. Category: Pick-up hitch. Version: ball 80...
€1.375,55 €1.136,82
 
Scharmüller Drawbar ball 50, rail 200 mm, pin Ø 16 mm, 150 kg
Scharmüller
Drawbar ball 50, rail 200 mm, pin Ø 16 mm, 150 kg
Rail width: 200 mm. Guide width: 25 mm. Detent pin Ø: 16 mm. Load capacity: 150 ...
€561,80 €464,30
 
SANDEN Aircon compressor SD7H15 12 V, pulley Ø 132 mm, 2 grooves Valtra-Valmet
5%
SANDEN
Aircon compressor SD7H15 12 V, pulley Ø 132 mm, 2 grooves Valtra-Valmet
Oil quantity (ccm): 135 | Suitable oil: SP - 10 | Refrigerant: R 134a | Connecti...
€562,03 €464,49 €533,90 €441,24
 
Repair set brake cylinder DOT4 with piston Valtra-Valmet, Steyr
5%
Repair set brake cylinder DOT4 with piston Valtra-Valmet, Steyr
Medium: DOT4. Additional information: With piston.
€58,58 €48,41 €55,65 €45,99
 
Showing 1 - 24 of 110

Valtra N 122 parts: brakes, engine seals and lighting

On an N 122, wear tends to announce itself. The brake pedal goes soft, or the exhaust manifold starts to blow at the turbo. This page brings together more than 110 parts that fit this Valtra from the N2 line, made by GRANIT, DANA Spicer, Scharmüller, Walterscheid and BOSCH.

Brake cylinders and repair kits

There are master brake cylinders, wheel brake cylinders and repair kits. A repair kit makes sense while the cylinder body is sound and only the cups and seals have given up. If the bore shows rust or scoring, a complete cylinder is the better buy.

Once it is fitted, bleed the whole brake system and use exactly the fluid named in the tractor's operator manual. The wrong fluid attacks the rubber parts, and the same cylinder will be weeping again within a season.

Sealing the Sisu engine

Engine work on this tractor revolves around seals of one sort or another. You can fit a rear crankshaft seal, an upper seal kit for the Sisu engine, an exhaust manifold seal at the turbocharger and an O-ring for the oil filler cap. Thermostats cover the cooling side. Oil dripping between engine and gearbox points to that rear crankshaft seal, and because the tractor has to be split to reach it, replace anything else in that area while it is apart.

Lights, door lock and drawbar

For lighting there are headlights, LED headlights with dipped and main beam, and flood beam work lamps. The cab door lock can be ordered on its own. At the rear, drawbars with a ball, separate balls and an adapter plate for the hitch rail all fit.

Thinking of swapping the old headlights for LED units? Check first that the new lamp fits the existing housing and that the plug matches. A flood beam work lamp lights up a wide area close to the tractor, which helps when hitching up or loading after dark. Re-aim new headlights once they are fitted so you do not dazzle oncoming traffic.

Matching parts to your tractor

Note the chassis number from the type plate on your N 122. For engine parts, have the engine number to hand as well, so the seals match your engine exactly. If the old part is still on the bench, look for the number stamped or printed on it. With lamps and brake parts that is usually the fastest way in.

Have another tractor from the same line in the shed? Its parts sit on a separate page: Valtra N 92 or Valtra N 142. Every other Valtra and Valmet model can be reached from Valtra parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart