Menu
EUR

Valtra N 143 tractor parts & technical data

More than 110 parts fit the Valtra N 143 and they are all on this page. Think of trailer couplings, electrics and steering and front axle parts, for example.

116 parts found for Valtra-Valmet N 143
Show:
Scharmüller Adapter plate rail width 335 mm, hole pattern 140 x 80 mm, M20
Scharmüller
Adapter plate rail width 335 mm, hole pattern 140 x 80 mm, M20
Load capacity: 3000 kg. D-value: 89,3 kN. Rail width: 335 mm. Hole pattern: 140 ...
€638,19 €527,43
 
Walterscheid Drawbar manual rail width 330 mm, coupling pin 31 mm, 92 kN
21%
Walterscheid
Drawbar manual rail width 330 mm, coupling pin 31 mm, 92 kN
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 31 ...
€1.104,81 €913,07 €873,47 €721,88
 
DANA Spicer Plug front axle 745
DANA Spicer
Plug front axle 745
€20,26 €16,75
 
Scharmüller Drawbar frame prepared for drawbar 71,9 kN, 2000 kg, rail 335 mm
4%
Scharmüller
Drawbar frame prepared for drawbar 71,9 kN, 2000 kg, rail 335 mm
Version: Prepared for drawbar | Detent pin Ø (mm): 22 | Load capacity (kg): 2000...
€1.275,80 €1.054,38 €1.223,74 €1.011,36
 
Wabco Trailer control valve 8 bar, M22 x 1,5, NW 10 mm
8%
Wabco
Trailer control valve 8 bar, M22 x 1,5, NW 10 mm
Working pressure (bar): 8 | Connection: M22 x 1.5 | Nominal width (mm): 10
€630,05 €520,70 €579,65 €479,05
 
NOX sensor Massey Ferguson, Valtra-Valmet, Fendt
8%
NOX sensor Massey Ferguson, Valtra-Valmet, Fendt
To fit: Massey Ferguson, Valtra-Valmet, Fendt.
€453,61 €374,88 €417,32 €344,89
 
Start switch 12 V, Ø 16,5 mm, lock K 11-2 keys
Start switch 12 V, Ø 16,5 mm, lock K 11-2 keys
Version: 12 V, with 4 blade terminal connections, Switch positions: 0: off, 1: c...
€16,13 €13,33
 
Walterscheid Ball hitch K80 330 / 25 / 32 mm, 2800 kg, 97,1 kN
19%
Walterscheid
Ball hitch K80 330 / 25 / 32 mm, 2800 kg, 97,1 kN
Quick height adjustment with rotation lock, load capacity up to 40 km/h 2800 kg,...
€2.111,26 €1.744,84 €1.719,18 €1.420,81
 
Gear wheel main shaft 31 teeth Valtra-Valmet
8%
Gear wheel main shaft 31 teeth Valtra-Valmet
Number of teeth: 31.
€423,24 €349,79 €389,38 €321,80
 
Cobo Contact switch mechanical brake light, clutch, PTO shaft, 12 / 24 V
8%
Cobo
Contact switch mechanical brake light, clutch, PTO shaft, 12 / 24 V
Version: For brake light, clutch, four-wheel drive, PTO, 12/24 V, power rating: ...
€32,65 €26,98 €30,04 €24,82
 
Scharmüller Support plate Piton Fix manual, 445 x 220 x 40 mm, 3 ton, AGCO gray
8%
Scharmüller
Support plate Piton Fix manual, 445 x 220 x 40 mm, 3 ton, AGCO gray
D-value (kN): 71,9 | Category: Support plates | Lock: Piton Fix manual | Version...
€987,09 €815,78 €908,12 €750,51
 
Wiper motor Massey Ferguson, Valtra-Valmet
8%
Wiper motor Massey Ferguson, Valtra-Valmet
€223,30 €184,55 €205,44 €169,78
 
Expansion valve airco 1/2 inch o-ring, 35 g
8%
Expansion valve airco 1/2 inch o-ring, 35 g
Weight (g): 35 | Equipment: O-ring | Connection thread A: # 8, 1/2"" O-ring | Co...
€54,07 €44,69 €49,74 €41,11
 
Gear wheel planetary set rear axle 82 teeth Valtra-Valmet
8%
Gear wheel planetary set rear axle 82 teeth Valtra-Valmet
Number of teeth: 82.
€894,96 €739,64 €823,36 €680,47
 
Walterscheid Adapter plate rail width 330 mm, hole pattern 160 x 100 mm, M21
21%
Walterscheid
Adapter plate rail width 330 mm, hole pattern 160 x 100 mm, M21
Guide width (mm): 32 | Description: The coupling plate is a height-adjustable sl...
€1.207,08 €997,59 €954,33 €788,70
 
Scharmüller Drawbar ball 50, rail 200 mm, pin Ø 16 mm, 150 kg
8%
Scharmüller
Drawbar ball 50, rail 200 mm, pin Ø 16 mm, 150 kg
Rail width: 200 mm. Guide width: 25 mm. Detent pin Ø: 16 mm. Load capacity: 150 ...
€583,34 €482,10 €536,67 €443,53
 
SANDEN Aircon compressor 12 V, Ø 119 mm, 6 grooves Valtra-Valmet
8%
SANDEN
Aircon compressor 12 V, Ø 119 mm, 6 grooves Valtra-Valmet
Fixing: DM | Refrigerant: R 134a | No. of grooves: 6 | Nominal voltage (V): 12 |...
€646,52 €534,31 €594,80 €491,57
 
Cooling fan Ø 600 mm Massey Ferguson, Valtra - Valmet
8%
Cooling fan Ø 600 mm Massey Ferguson, Valtra - Valmet
Ø: 600 mm. To fit: Massey Ferguson, Valtra - Valmet.
€185,59 €153,38 €170,74 €141,11
 
Gas strut door 250 N, 345 mm, stroke 126 mm Massey Ferguson 4745ZN
8%
Gas strut door 250 N, 345 mm, stroke 126 mm Massey Ferguson 4745ZN
suitable for: Tür. Newtons: 250. A: 345 mm. B: 175 mm. C: 8 mm. D: 8 mm. Form: 2...
€34,26 €28,31 €31,52 €26,05
 
Alternator 12 V / 65 A Challenger, JCB, Massey Ferguson, Valtra-Valmet
8%
Alternator 12 V / 65 A Challenger, JCB, Massey Ferguson, Valtra-Valmet
Installation angle (°): l 60 | Charging current (A): 65 | Additional information...
€256,15 €211,69 €235,66 €194,76
 
Clutches set 7+7 Valtra-Valmet 6250 - 8950, C90 - XM150
8%
Clutches set 7+7 Valtra-Valmet 6250 - 8950, C90 - XM150
€171,21 €141,50 €157,51 €130,18
 
DANA Spicer Wheel hub final drive front axle 730
DANA Spicer
Wheel hub final drive front axle 730
€408,30 €337,44
 
DANA Spicer Hollow wheel carrier final drive front axle 212, 5,22 kg
DANA Spicer
Hollow wheel carrier final drive front axle 212, 5,22 kg
€513,07 €424,03
 
Clutches set 9+9 Valtra-Valmet 6250 - 8950, C90 - XM150
8%
Clutches set 9+9 Valtra-Valmet 6250 - 8950, C90 - XM150
€230,48 €190,48 €212,04 €175,24
 
SACHS Shock absorber rear, gas pressure MSE27/13X47A2 Valtra-Valmet
8%
SACHS
Shock absorber rear, gas pressure MSE27/13X47A2 Valtra-Valmet
Dimensions (mm): MSE27/13X47A2 | Installation location: Rear | Design: Gas press...
€698,55 €577,31 €642,67 €531,13
 
DANA Spicer King pin final drive front axle 755
8%
DANA Spicer
King pin final drive front axle 755
€114,51 €94,64 €105,35 €87,07
 
DANA Spicer Differential bevel gear final drive front axle 730
8%
DANA Spicer
Differential bevel gear final drive front axle 730
€244,50 €202,07 €224,94 €185,90
 
DANA Spicer Guard plate differential front axle 745
DANA Spicer
Guard plate differential front axle 745
€17,09 €14,12
 
DANA Spicer Grooved nut bevel gear differential front axle 730
8%
DANA Spicer
Grooved nut bevel gear differential front axle 730
€82,27 €67,99 €75,69 €62,55
 
BorgWarner Turbocharger engine 49CWA Massey Ferguson, Valtra-Valmet
4%
BorgWarner
Turbocharger engine 49CWA Massey Ferguson, Valtra-Valmet
€2.110,32 €1.744,07 €2.022,35 €1.671,36
 
MAHLE Gear reduction starter 3,2 kW, 11 teeth clockwise, 204,3 mm, Ø 89 mm
40%
MAHLE
Gear reduction starter 3,2 kW, 11 teeth clockwise, 204,3 mm, Ø 89 mm
€548,46 €453,27 €328,50 €271,49
 
Gear reduction starter 12 V, 4,2 kW, 11 teeth, 226 mm, clockwise
8%
Gear reduction starter 12 V, 4,2 kW, 11 teeth, 226 mm, clockwise
€331,16 €273,69 €304,67 €251,79
 
Scharmüller Drawbar frame 10 kN, rail width 200 mm, nose weight 350 kg
8%
Scharmüller
Drawbar frame 10 kN, rail width 200 mm, nose weight 350 kg
Version: Standard | Category: Bearing supports | Guide width (mm): 25 | Rail wid...
€668,46 €552,45 €614,98 €508,25
 
PTO shaft end piece 1 3/8 inch, 6 splines, 245 mm Valtra-Valmet
8%
PTO shaft end piece 1 3/8 inch, 6 splines, 245 mm Valtra-Valmet
Version: 1 3/8"", 6 grooves | Length (mm): 245
€415,22 €343,16 €382,00 €315,70
 
CARLISLE External plate Hi-Lo 1,5 mm, inner 98,9 mm, outer 142,5 mm, 6 teeth
CARLISLE
External plate Hi-Lo 1,5 mm, inner 98,9 mm, outer 142,5 mm, 6 teeth
Version: thickness = 1,5 mm inner = 98,9 mm outer = 142,5 mm 6 teeth
€17,19 €14,20
 
DANA Spicer O-ring as front axle 745, 4 g
DANA Spicer
O-ring as front axle 745, 4 g
€17,60 €14,55
 
DANA Spicer Spacer as front axle 745, outer-Ø 150 mm, inner-Ø 120 mm, 1 mm
8%
DANA Spicer
Spacer as front axle 745, outer-Ø 150 mm, inner-Ø 120 mm, 1 mm
Thickness (mm): 1 | Outer Ø (mm): 150 | Inner Ø (mm): 120
€46,81 €38,69 €43,07 €35,59
 
DANA Spicer Intermediate bush as front axle 745, 120 x 127 x 40 mm
8%
DANA Spicer
Intermediate bush as front axle 745, 120 x 127 x 40 mm
Dimensions (mm): 120 x 127 x 40 | Inner Ø (mm): 120 | Height (mm): 40 | Outer Ø ...
€140,42 €116,05 €129,19 €106,77
 
Clutch plate set omkeerinrichting Valtra-Valmet
8%
Clutch plate set omkeerinrichting Valtra-Valmet
€486,96 €402,45 €448,00 €370,25
 
Scharmüller Pick-Up Hitch einsätze 80 shank 60 x 80 mm, 417 mm, bore 26 mm
8%
Scharmüller
Pick-Up Hitch einsätze 80 shank 60 x 80 mm, 417 mm, bore 26 mm
suitable for: Valtra. Series: C-Serie. Category: Pick-up hitch. Version: ball 80...
€1.428,29 €1.180,41 €1.314,03 €1.085,97
 
BOSCH Pressure regulator CP4 Valtra-Valmet, Fendt, Massey Ferguson
15%
BOSCH
Pressure regulator CP4 Valtra-Valmet, Fendt, Massey Ferguson
€184,72 €152,66 €156,56 €129,39
 
Outlet valve Fendt, Massey Ferguson
Outlet valve Fendt, Massey Ferguson
€58,29 €48,18
 
Showing 1 - 48 of 116

Valtra N 143 parts for cooling, engine and drivetrain

When a Valtra N 143 starts running hot under load on a summer day, the cause is often a small part of the cooling system. This page lists more than 110 parts that fit the N 143, supplied by GRANIT and by brands including DANA Spicer, Scharmüller, Walterscheid and BOSCH.

Treat cooling as one system

Cooling parts for this tractor include thermostats, temperature sensors for common rail Sisu engines, a fan clutch and an electric cooling fan. They work as a team, so when temperature becomes a problem it pays to check them together instead of swapping a single part on a hunch.

A fan clutch is easy to test. With the engine cold, the fan should turn by hand with slight resistance. If it still spins just as freely once the engine is warm, the clutch is no longer engaging. A thermostat can be tested in a pan of water with a thermometer, so you can see at what temperature it opens.

Engine and turbo

Remanufactured turbochargers, gear reduction starters, seals for pressure pipes and O-rings for the oil filler cap fit the N 143 as well. Never run a turbo dry on start up. Prime it through the oil feed with clean engine oil before fitting, and make sure the intake side is clean.

When a turbo has failed, always track down why. A dirty air filter, stretched oil change intervals or a leaking intake hose will otherwise destroy the new unit in short order.

Drivetrain, cab and hitch

For the drivetrain there are gear wheels and differential bevel gears. Door locks fit the cab, and flood beam work lamps help with night work. At the rear you will find ball drawbars, separate ball inserts and adapter plates.

A ball that has worn oval gives a hard knock through the hitch when pulling away or braking. Replacing just the ball insert is less work than a complete drawbar, provided the rail and frame are still sound. When a differential bevel gear is worn, look at the neighbouring gears and thrust washers too, since they have carried the same load.

Choosing the right part

Use the serial number on the type plate as the basis. The N 143 is part of the N3 range from Valtra. To be completely sure, compare the reference number on the old part with the product details. For a thermostat, also check the opening temperature marked on the old one. For the fan clutch, compare the model designation on the plate with the tractor models named on the product.

Parts for other tractors in the range are on their own pages: Valtra N 103, Valtra N 113, Valtra N 123 and Valtra N 163. The full range for the brand is under Valtra parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart