Menu
EUR

Valtra N 143 tractor parts & technical data

More than 110 parts fit the Valtra N 143 and they are all on this page. Think of trailer couplings, electrics and steering and front axle parts, for example.

116 parts found for Valtra-Valmet N 143
Show:
Fan clutch Valtra N103.4-N163, T132-T202, T133-T203
8%
Fan clutch Valtra N103.4-N163, T132-T202, T133-T203
€726,26 €600,21 €668,16 €552,20
 
Walterscheid Drawbar ball 80 rail 330 mm, pin Ø 25 mm, 4000 kg, black
21%
Walterscheid
Drawbar ball 80 rail 330 mm, pin Ø 25 mm, 4000 kg, black
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000...
€2.152,79 €1.779,17 €1.702,02 €1.406,63
 
LED work lights spotlight 3600 lm, 36 W, 148 x 95 x 58 mm
8%
LED work lights spotlight 3600 lm, 36 W, 148 x 95 x 58 mm
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs included:...
€77,66 €64,18 €71,45 €59,05
 
DANA Spicer Sealing ring final drive front axle 755, 40 x 65 x 18 mm
8%
DANA Spicer
Sealing ring final drive front axle 755, 40 x 65 x 18 mm
Dimensions (mm): 40 x 65 x 18
€33,83 €27,96 €31,12 €25,72
 
Rail pressure sensor Fendt 5255L-9470X, Massey Ferguson Series 5600-9530
8%
Rail pressure sensor Fendt 5255L-9470X, Massey Ferguson Series 5600-9530
€177,68 €146,84 €163,47 €135,10
 
Reman turbocharger Massey Ferguson 5480-6616, Valtra-Valmet N1-N3
4%
Reman turbocharger Massey Ferguson 5480-6616, Valtra-Valmet N1-N3
€1.481,54 €1.224,41 €1.419,78 €1.173,38
 
Cooling fan electric Ø 596 mm Valtra-Valmet, Case IH, New Holland
8%
Cooling fan electric Ø 596 mm Valtra-Valmet, Case IH, New Holland
Ø: 596 mm.
€946,94 €782,60 €871,18 €719,99
 
Pressure pipe Fendt, Massey Ferguson
Pressure pipe Fendt, Massey Ferguson
Designation: For 38015243.
€133,71 €110,50
 
Door lock, left Massey Ferguson, Case IH, Steyr
8%
Door lock, left Massey Ferguson, Case IH, Steyr
€49,57 €40,97 €45,60 €37,69
 
Scharmüller Drawbar K80 manual, rail 335 mm, pin Ø 22 mm, 3000 kg, AGCO gray
12%
Scharmüller
Drawbar K80 manual, rail 335 mm, pin Ø 22 mm, 3000 kg, AGCO gray
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 3000...
€1.349,76 €1.115,50 €1.183,18 €977,84
 
Internal plate PTO clutch Ø 133,4 x 93 mm, 1,8 mm, 45 teeth
Internal plate PTO clutch Ø 133,4 x 93 mm, 1,8 mm, 45 teeth
Version: Thickness: 1.8 mm, inner: 93 mm, outer: 133.4 mm, 45 splines
€23,45 €19,38
 
DANA Spicer Bush bevel gear differential front axle 745 Fendt, Valtra-Valmet
4%
DANA Spicer
Bush bevel gear differential front axle 745 Fendt, Valtra-Valmet
€88,50 €73,14 €84,81 €70,09
 
DANA Spicer Differential bevel gear final drive front axle 725
4%
DANA Spicer
Differential bevel gear final drive front axle 725
€107,79 €89,08 €103,30 €85,38
 
Thermostat Ø 67 mm, 83 °C Massey Ferguson, Case IH, Steyr
8%
Thermostat Ø 67 mm, 83 °C Massey Ferguson, Case IH, Steyr
Ø: 67 mm. Temperature: 83 °C.
€38,47 €31,79 €35,39 €29,25
 
Tank cap engine cooling
8%
Tank cap engine cooling
€46,16 €38,15 €42,47 €35,10
 
Door lock, left Fendt Farmer 240 S (Typ 294), GT 395
8%
Door lock, left Fendt Farmer 240 S (Typ 294), GT 395
€59,42 €49,11 €54,67 €45,18
 
LED headlight dipped beam / main beam / dagrijlicht, 155 x 117 x 83 mm
8%
LED headlight dipped beam / main beam / dagrijlicht, 155 x 117 x 83 mm
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs included:...
€163,26 €134,93 €150,20 €124,13
 
BOSCH Sensor hydraulic pressure lifting height
15%
BOSCH
Sensor hydraulic pressure lifting height
Version: Lifting height.
€370,79 €306,44 €314,26 €259,72
 
Borg Warner Fan clutch M30 x 2 L, Ø 152,4 mm Valtra-Valmet
4%
Borg Warner
Fan clutch M30 x 2 L, Ø 152,4 mm Valtra-Valmet
Thread: M30 x 2 L. PCD: 152,4 mm.
€643,94 €532,18 €615,56 €508,73
 
Thermostat Ø 67 mm, 83 °C
8%
Thermostat Ø 67 mm, 83 °C
Ø: 67 mm. Temperature: 83 °C.
€39,55 €32,69 €36,39 €30,07
 
Temperature sensor Injectors-Rail Sisu-engines
8%
Temperature sensor Injectors-Rail Sisu-engines
Version: For common rail systems, to fit Sisu engines.
€174,05 €143,84 €160,13 €132,34
 
Door lock, right Fendt Farmer 240 S (Typ 294), GT 395
8%
Door lock, right Fendt Farmer 240 S (Typ 294), GT 395
€56,69 €46,85 €52,15 €43,10
 
Mirror 330 x 240 mm, heated, rod-Ø 16 - 22 mm Massey Ferguson
8%
Mirror 330 x 240 mm, heated, rod-Ø 16 - 22 mm Massey Ferguson
Dimensions: 330 x 240 mm. Height: 330 mm. Width: 240 mm. Version: Heated. Notes:...
€209,98 €173,54 €193,18 €159,65
 
Scharmüller Ball 80® ball inserts gray cast iron, rail width 335 mm, 4000 kg
Scharmüller
Ball 80® ball inserts gray cast iron, rail width 335 mm, 4000 kg
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000...
€1.116,48 €922,71
 
Cobo Headlight left / right 12 V, built-in, screw fixing
8%
Cobo
Headlight left / right 12 V, built-in, screw fixing
Nominal voltage: 12 V. Installation location: Left, right. Bulb: 12V55W / H4, 12...
€100,76 €83,27 €92,70 €76,61
 
AdBlue supply unit Fendt, Massey Ferguson, SAME, Lamborghini
8%
AdBlue supply unit Fendt, Massey Ferguson, SAME, Lamborghini
Description: AdBlue supply units ensure even metering of AdBlue depending on the...
€1.521,13 €1.257,13 €1.399,44 €1.156,56
 
AdBlue-filter Fendt, John Deere, Massey Ferguson
8%
AdBlue-filter Fendt, John Deere, Massey Ferguson
Description: for AdBlue supply unit. MANN no.: U5001KIT. Donaldson no.: P956170....
€59,17 €48,90 €54,44 €44,99
 
Cylinder head gasket engine Sisu 420
8%
Cylinder head gasket engine Sisu 420
€152,46 €126,00 €140,26 €115,92
 
Scharmüller Drawbar K50 Cramer, rail 335 mm, pin Ø 22 mm, 31 kN
3%
Scharmüller
Drawbar K50 Cramer, rail 335 mm, pin Ø 22 mm, 31 kN
Rail width: 335 mm. Guide width: 30 mm. Detent pin Ø: 22 mm. Load capacity: 250 ...
€899,63 €743,50 €871,22 €720,02
 
Walterscheid Piton Fix rail width 330 mm, locking pin Ø 25 mm, 3000 kg, 89,3 kN
21%
Walterscheid
Piton Fix rail width 330 mm, locking pin Ø 25 mm, 3000 kg, 89,3 kN
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000...
€1.748,75 €1.445,25 €1.382,58 €1.142,63
 
Scharmüller Drawbar ball 50 rail 335 mm, pin Ø 22 mm, 250 kg, AGCO gray
3%
Scharmüller
Drawbar ball 50 rail 335 mm, pin Ø 22 mm, 250 kg, AGCO gray
Rail width: 335 mm. Guide width: 30 mm. Detent pin Ø: 22 mm. Load capacity: 250 ...
€839,65 €693,93 €812,85 €671,77
 
Work lamp flood beam H3, 55 W, 12 V, 150 x 98 x 89 mm
8%
Work lamp flood beam H3, 55 W, 12 V, 150 x 98 x 89 mm
Bulb: H3. Form: Rectangular. Material: Housing: plastic, lens: glass. Dimensions...
€55,15 €45,58 €50,74 €41,93
 
Pressure sensor thread 1 x 7,0 mm
8%
Pressure sensor thread 1 x 7,0 mm
Thread: 1 x 7.0 mm. Menke no.: 210301.
€35,67 €29,48 €32,82 €27,12
 
Hand brake cable 1005 mm Valtra-Valmet HiTech, C, M, N, T, X, XM
8%
Hand brake cable 1005 mm Valtra-Valmet HiTech, C, M, N, T, X, XM
Length: 1005 mm.
€210,23 €173,74 €193,41 €159,84
 
Brake disc Ø 224 mm, 27 teeth, 4,8 mm thick, organic Valtra-Valmet
8%
Brake disc Ø 224 mm, 27 teeth, 4,8 mm thick, organic Valtra-Valmet
Dimensions: Ø 224, 4.8 thick, 27 splines mm.
€75,25 €62,19 €69,23 €57,21
 
Starter ring gear Ø 405/373 mm, 133 teeth Valtra-Valmet
8%
Starter ring gear Ø 405/373 mm, 133 teeth Valtra-Valmet
Version: Ø 405/373 mm, 133 teeth.
€224,52 €185,55 €206,56 €170,71
 
Showing 49 - 96 of 116

Valtra N 143 parts for cooling, engine and drivetrain

When a Valtra N 143 starts running hot under load on a summer day, the cause is often a small part of the cooling system. This page lists more than 110 parts that fit the N 143, supplied by GRANIT and by brands including DANA Spicer, Scharmüller, Walterscheid and BOSCH.

Treat cooling as one system

Cooling parts for this tractor include thermostats, temperature sensors for common rail Sisu engines, a fan clutch and an electric cooling fan. They work as a team, so when temperature becomes a problem it pays to check them together instead of swapping a single part on a hunch.

A fan clutch is easy to test. With the engine cold, the fan should turn by hand with slight resistance. If it still spins just as freely once the engine is warm, the clutch is no longer engaging. A thermostat can be tested in a pan of water with a thermometer, so you can see at what temperature it opens.

Engine and turbo

Remanufactured turbochargers, gear reduction starters, seals for pressure pipes and O-rings for the oil filler cap fit the N 143 as well. Never run a turbo dry on start up. Prime it through the oil feed with clean engine oil before fitting, and make sure the intake side is clean.

When a turbo has failed, always track down why. A dirty air filter, stretched oil change intervals or a leaking intake hose will otherwise destroy the new unit in short order.

Drivetrain, cab and hitch

For the drivetrain there are gear wheels and differential bevel gears. Door locks fit the cab, and flood beam work lamps help with night work. At the rear you will find ball drawbars, separate ball inserts and adapter plates.

A ball that has worn oval gives a hard knock through the hitch when pulling away or braking. Replacing just the ball insert is less work than a complete drawbar, provided the rail and frame are still sound. When a differential bevel gear is worn, look at the neighbouring gears and thrust washers too, since they have carried the same load.

Choosing the right part

Use the serial number on the type plate as the basis. The N 143 is part of the N3 range from Valtra. To be completely sure, compare the reference number on the old part with the product details. For a thermostat, also check the opening temperature marked on the old one. For the fan clutch, compare the model designation on the plate with the tractor models named on the product.

Parts for other tractors in the range are on their own pages: Valtra N 103, Valtra N 113, Valtra N 123 and Valtra N 163. The full range for the brand is under Valtra parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart