Menu
EUR

Valtra N 91 tractor parts & technical data

What fits the Valtra N 91 from the N1 series? More than 130 parts from our range, including trailer couplings, electrics and lighting for your tractor.

129 parts found for Valtra-Valmet N 91
Show:
Main bearing standard Ø 85 mm
5%
Main bearing standard Ø 85 mm
€48,38 €39,98 €45,95 €37,98
 
Internal plate PTO clutch Ø 133,4 x 93 mm, 1,8 mm, 45 teeth
5%
Internal plate PTO clutch Ø 133,4 x 93 mm, 1,8 mm, 45 teeth
Version: Thickness: 1.8 mm, inner: 93 mm, outer: 133.4 mm, 45 splines
€17,98 €14,86 €17,00 €14,05
 
GRANIT Filter dryer Ø 76 mm, 228 mm, connection thread M
5%
GRANIT
Filter dryer Ø 76 mm, 228 mm, connection thread M
Outer Ø (mm): 76 | Connection: O-ring A = male thread 3/8"" - 18UNF O-ring B = m...
€61,13 €50,52 €58,00 €47,93
 
LUK Central release bearing 2 connections 45,5 x 95 x 105 mm
5%
LUK
Central release bearing 2 connections 45,5 x 95 x 105 mm
Dimensions (mm): 45.5 x 95 x 105
€465,80 €384,96 €442,50 €365,70
 
GRANIT Clutches set 7+7 Valtra-Valmet 6250 - 8950, C90 - XM150
5%
GRANIT
Clutches set 7+7 Valtra-Valmet 6250 - 8950, C90 - XM150
€164,08 €135,60 €155,85 €128,80
 
DANA Spicer Hollow wheel carrier final drive front axle 212, 5,22 kg
DANA Spicer
Hollow wheel carrier final drive front axle 212, 5,22 kg
€513,00 €423,97
 
DANA Spicer Intermediate bush as front axle 745, 120 x 127 x 40 mm
5%
DANA Spicer
Intermediate bush as front axle 745, 120 x 127 x 40 mm
Dimensions (mm): 120 x 127 x 40 | Inner Ø (mm): 120 | Height (mm): 40 | Outer Ø ...
€134,56 €111,21 €127,80 €105,62
 
Gear wheel main shaft 31 teeth Valtra-Valmet
5%
Gear wheel main shaft 31 teeth Valtra-Valmet
Number of teeth: 31.
€405,59 €335,20 €385,30 €318,43
 
GRANIT Seal timing case Massey Ferguson, Valtra-Valmet
GRANIT
Seal timing case Massey Ferguson, Valtra-Valmet
€28,80 €23,80
 
GRANIT Oil sump gasket Valtra-Valmet engine 411DS
GRANIT
Oil sump gasket Valtra-Valmet engine 411DS
€25,90 €21,41
 
Cylinder head bolt 12 x 140 mm Massey Ferguson, Case IH, Steyr
Cylinder head bolt 12 x 140 mm Massey Ferguson, Case IH, Steyr
Dimensions: M12 x 140 mm.
€14,60 €12,07
 
Piston ring set 3 rings Ø 108 mm, 2,5 mm / 2,5 mm / 4 mm
5%
Piston ring set 3 rings Ø 108 mm, 2,5 mm / 2,5 mm / 4 mm
Dimensions: 3 rings, Ø 108 mm, 2.5 mm / 2.5 mm / 4 mm.
€39,58 €32,71 €37,60 €31,07
 
GRANIT Starter switch with 2 keys
5%
GRANIT
Starter switch with 2 keys
€70,07 €57,91 €66,55 €55,00
 
Cobo Headlight left / right 12 V, built-in, screw fixing
5%
Cobo
Headlight left / right 12 V, built-in, screw fixing
Nominal voltage: 12 V. Installation location: Left, right. Bulb: 12V55W / H4, 12...
€96,56 €79,80 €91,70 €75,79
 
Work lamp flood beam H3, 55 W, 12 V, 150 x 98 x 89 mm
10%
Work lamp flood beam H3, 55 W, 12 V, 150 x 98 x 89 mm
Bulb: H3. Form: Rectangular. Material: Housing: plastic, lens: glass. Dimensions...
€55,49 €45,86 €50,20 €41,49
 
Clutch master cylinder Valtra-Valmet 6000 - 8750, N91, T120 - T171
5%
Clutch master cylinder Valtra-Valmet 6000 - 8750, N91, T120 - T171
€189,20 €156,36 €179,70 €148,51
 
Showing 97 - 120 of 129

Valtra N 91 parts

With the right parts, a Valtra N 91 will keep working for a good many seasons yet. This page lists more than 130 of them that fit the model, from GRANIT together with DANA Spicer, Scharmüller, Walterscheid and GRAMMER.

Cooling hoses

Top and bottom radiator hoses keep the cooling system sealed. A hose that feels soft or shows cracks near the clamps is better replaced in the yard than after it bursts in the field.

Turbo, cylinder head and seals

For the engine there are remanufactured turbochargers, exhaust manifold seals at the turbo, manifold gaskets, seal kits, crankshaft seals and cylinder head bolts.

When fitting a turbocharger, prime it with clean engine oil through the oil feed before the first start, then let the engine idle for a moment so the shaft never runs dry. With a new head gasket, always use new cylinder head bolts, as the old ones have already stretched when they were last tightened. Torque them in the correct sequence and in stages.

Lights, cab and towing

For lighting there are headlights, LED headlights, work lamps and flasher units. If the indicators suddenly flash twice as fast, a failed bulb is the usual cause rather than the flasher unit. In the cab there are door locks and tractor seats, and for towing there are ball drawbars and separate balls.

Door locks and seats

A cab door that no longer shuts cleanly is not always down to the lock. First check whether the striker plate on the pillar has shifted and adjust it if needed. If the lock itself is stiff, use a dry lubricant such as graphite or silicone spray instead of grease, since grease traps dust and makes the lock heavier over time.

A sagging tractor seat makes a long day on the N 91 harder work. When replacing one, compare the mounting points underneath so the new seat fits the console without modification.

Parts for your N 91

Check the type plate to confirm it is an N 91. A turbocharger, door lock or headlight usually carries a reference number, which you compare with the product details. For radiator hoses, it helps to know if you need the top or the bottom one.

Other Valtra tractors from the N range have their own pages:

Every other model from the brand is listed under Valtra parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart