Menu
EUR

Valtra S 374 tractor parts & technical data

Selected for the Valtra S 374 of the S4 series: more than 70 parts, with trailer couplings, electrics and engine components as the main groups.

80 parts found for Valtra-Valmet S 374
Show:
O-ring piston 1x required Fendt, Massey Ferguson, Valtra-Valmet
Description: 1x required. More
Description: 1x required.
€25,31 €20,92
Hydraulic top link cat. 3, 680 - 895 mm, stroke 215 mm, 14 ton
A cat.: 3 / 32. B cat.: 3 / 32. F: 680 / 895 mm. Piston rod Ø D: 45 mm. Cylinder Ø inner E: 105 mm. Lifting force: 14 t. Tensile force: 9 t. Adjusta... More
A cat.: 3 / 32. B cat.: 3 / 32. F: 680 / 895 mm. Piston rod Ø D: 45 m...
€940,99 €777,68 €865,71 €715,46
You save 8%
Temperature sensor Fendt, Massey Ferguson, Valtra-Valmet
€94,76 €78,31 €87,18 €72,05
You save 8%
Fender bracket left complete Massey Ferguson 8600-8660
€801,46 €662,36 €737,34 €609,37
You save 8%
Spring fender left Massey Ferguson, Challenger, Valtra-Valmet
€74,75 €61,78 €68,77 €56,83
You save 8%
Scharmüller Pick-Up Hitch einsätze 80 shank 70 x 80 mm, 445 mm, bore 30,5 mm
Scharmüller
suitable for: Claas. Series: Axion 800 (A30/A31). Category: Pick-up hitch. Version: ball 80. Colour: Pöttinger red. Overhang: 360 mm. Hole: 30,5 mm. ... More
suitable for: Claas. Series: Axion 800 (A30/A31). Category: Pick-up hi...
€1.465,37 €1.211,05
Bush for Vario drive assembly Fendt, Massey Ferguson
€60,13 €49,69 €55,32 €45,72
You save 8%
AdBlue-filter Fendt, John Deere, Massey Ferguson
Description: for AdBlue supply unit. MANN no.: U5001KIT. Donaldson no.: P956170. Fleetguard no.: UF101. Hifi no.: SD70380. Hengst no.: E103UD295. More
Description: for AdBlue supply unit. MANN no.: U5001KIT. Donaldson no....
€59,17 €48,90 €54,44 €44,99
You save 8%
Filler cap for expansion tank
Version: For expansion tank. More
Version: For expansion tank.
€51,57 €42,62 €47,44 €39,21
You save 8%
Tensioning pulley Ø 74 / 46,3 mm, PK12
€46,78 €38,66 €43,04 €35,57
You save 8%
Belt tensioner Ø 75 mm, width 46,5 mm Fendt, Massey Ferguson
Outer Ø: 75 mm. Width: 46,5 mm. More
Outer Ø: 75 mm. Width: 46,5 mm.
€135,96 €112,36 €125,08 €103,37
You save 8%
Cooling fan Ø 715 mm Valtra S 232-374, Fendt 922-939
€408,92 €337,95 €376,21 €310,91
You save 8%
AdBlue injection unit Valtra-Valmet, Fendt
€717,52 €592,99 €660,12 €545,55
You save 8%
O-ring piston 2x required Fendt, Massey Ferguson, Valtra-Valmet
Description: 2x required. More
Description: 2x required.
€14,54 €12,01
Fender bracket right complete Massey Ferguson 8600-8660
€801,46 €662,36 €737,34 €609,37
You save 8%
Pivot right Massey Ferguson, Challenger, Valtra-Valmet
€591,17 €488,57 €543,88 €449,48
You save 8%
Scharmüller Forced steering inner part left Ball 80 to K50 250 mm, 2 ton
Scharmüller
Assembly notes: Anticlockwise. Steering power: 2 t. Lock: K50. Description: Approved for steering forces up to 20 kN (2 t). Load capacity: 2 t. Load c... More
Assembly notes: Anticlockwise. Steering power: 2 t. Lock: K50. Descrip...
€481,06 €397,57 €453,50 €374,79
You save 6%
Walterscheid Adapter plate rail width 390 mm, hole pattern 160 x 100 mm, M21
Walterscheid
Rail width: 390 mm. Guide width: 32 mm. Detent pin Ø: 25 mm. Load capacity: 2800 kg. D-value: 89,3 kN. Central hole: 95 mm. Hole pattern: 160 x 100 m... More
Rail width: 390 mm. Guide width: 32 mm. Detent pin Ø: 25 mm. Load cap...
€1.150,89 €951,15 €909,90 €751,99
You save 21%
Rail pressure valve Valtra-Valmet N 104 - T 234, Massey Ferguson
€149,08 €123,21 €137,15 €113,35
You save 8%
Signal transmitter exhaust aftertreatment 930 mm
Description: length: 930 mm. More
Description: length: 930 mm.
€786,41 €649,93
Thermostat Ø 54 mm, 80 °C Massey Ferguson, Valtra, Fendt, Challenger
Ø: 54 mm. Temperature: 80 °C. More
Ø: 54 mm. Temperature: 80 °C.
€26,13 €21,59
Rocker arm 517 mm high, up to wheel size 28'' Massey Ferguson
Version: 517 mm high, up to wheel size 28". More
Version: 517 mm high, up to wheel size 28".
€190,28 €157,26 €175,06 €144,68
You save 8%
Temperature sensor A84-A134
€94,76 €78,31 €87,18 €72,05
You save 8%
Showing 49 - 80 of 80

Valtra S 374 parts for sensors, fenders and hitching

On a big tractor like the Valtra S 374, it is rarely a single wear part that needs attention. The sensors around the engine, the brackets that carry the fenders and the hitch at the rear all take their share. This page lists more than 70 replacement parts for the model from GRANIT, Scharmüller, Walterscheid, BOSCH and SACHS.

Engine and exhaust sensors

For the engine there are rail pressure sensors, temperature sensors, signal transmitters and NOx sensors. A rail pressure sensor reads the pressure in the fuel rail, and the injection is controlled from that reading. When working on the fuel system, keep everything spotlessly clean and shut the engine down well beforehand so the rail pressure has dropped. Seals for pressure pipes, silencer gaskets and O-rings make sure everything is tight again after the repair. A belt tensioner keeps the drive belt taut.

Fenders and fuel cap

Fender brackets and fender springs have a hard life on the road and on rough farm tracks. A broken bracket lets the fender hit the tyre, so replace a cracked one in good time and check the spring while you are there, since a tired spring lets the fender swing further. Vented fuel tank caps are listed too. If the vent blocks, a vacuum builds in the tank and the engine can stall mid job.

At the rear

For hitching there are drawbars, screw ball adapters and a retrofit swinging drawbar. If you pull a trailer with a steered axle, forced steering parts are on this page as well.

A NOx sensor on the S 374 calls for a patient approach. Let the exhaust cool, clean the area around the sensor and use penetrating oil if it is stuck. Follow the cable back to its plug and only disconnect it once you know where the new lead will run, because a cable resting against a hot exhaust part will not last. After fitting, it can take a while before the engine electronics recognise the new sensor and any warnings clear.

Model and reference number

Check the type plate for the model and serial number. With sensors, the reference number on the old unit is the safest guide, since plugs and threads can differ between versions. Check that number against the details listed with the part, and only then place your order.

The Valtra S 274 comes from the same line. For every other model from the brand, from older Valmet tractors to current series, go to Valtra parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart