Menu
EUR

Valtra S 374 tractor parts & technical data

Selected for the Valtra S 374 of the S4 series: more than 70 parts, with trailer couplings, electrics and engine components as the main groups.

80 parts found for Valtra-Valmet S 374
Show:
O-ring piston 1x required Fendt, Massey Ferguson, Valtra-Valmet
O-ring piston 1x required Fendt, Massey Ferguson, Valtra-Valmet
Description: 1x required.
€25,31 €20,92
 
Hydraulic top link cat. 3, 680 - 895 mm, stroke 215 mm, 14 ton
8%
Hydraulic top link cat. 3, 680 - 895 mm, stroke 215 mm, 14 ton
A cat.: 3 / 32. B cat.: 3 / 32. F: 680 / 895 mm. Piston rod Ø D: 45 mm. Cylinder...
€940,99 €777,68 €865,71 €715,46
 
Temperature sensor Fendt, Massey Ferguson, Valtra-Valmet
8%
Temperature sensor Fendt, Massey Ferguson, Valtra-Valmet
€94,76 €78,31 €87,18 €72,05
 
Fender bracket left complete Massey Ferguson 8600-8660
8%
Fender bracket left complete Massey Ferguson 8600-8660
€801,46 €662,36 €737,34 €609,37
 
Spring fender left Massey Ferguson, Challenger, Valtra-Valmet
8%
Spring fender left Massey Ferguson, Challenger, Valtra-Valmet
€74,75 €61,78 €68,77 €56,83
 
Scharmüller Pick-Up Hitch einsätze 80 shank 70 x 80 mm, 445 mm, bore 30,5 mm
Scharmüller
Pick-Up Hitch einsätze 80 shank 70 x 80 mm, 445 mm, bore 30,5 mm
suitable for: Claas. Series: Axion 800 (A30/A31). Category: Pick-up hitch. Versi...
€1.465,37 €1.211,05
 
Bush for Vario drive assembly Fendt, Massey Ferguson
8%
Bush for Vario drive assembly Fendt, Massey Ferguson
€60,13 €49,69 €55,32 €45,72
 
AdBlue-filter Fendt, John Deere, Massey Ferguson
8%
AdBlue-filter Fendt, John Deere, Massey Ferguson
Description: for AdBlue supply unit. MANN no.: U5001KIT. Donaldson no.: P956170....
€59,17 €48,90 €54,44 €44,99
 
Filler cap for expansion tank
8%
Filler cap for expansion tank
Version: For expansion tank.
€51,57 €42,62 €47,44 €39,21
 
Tensioning pulley Ø 74 / 46,3 mm, PK12
8%
Tensioning pulley Ø 74 / 46,3 mm, PK12
€46,78 €38,66 €43,04 €35,57
 
Belt tensioner Ø 75 mm, width 46,5 mm Fendt, Massey Ferguson
8%
Belt tensioner Ø 75 mm, width 46,5 mm Fendt, Massey Ferguson
Outer Ø: 75 mm. Width: 46,5 mm.
€135,96 €112,36 €125,08 €103,37
 
Cooling fan Ø 715 mm Valtra S 232-374, Fendt 922-939
8%
Cooling fan Ø 715 mm Valtra S 232-374, Fendt 922-939
Ø: 715 mm.
€408,92 €337,95 €376,21 €310,91
 
AdBlue injection unit Valtra-Valmet, Fendt
8%
AdBlue injection unit Valtra-Valmet, Fendt
€717,52 €592,99 €660,12 €545,55
 
O-ring piston 2x required Fendt, Massey Ferguson, Valtra-Valmet
O-ring piston 2x required Fendt, Massey Ferguson, Valtra-Valmet
Description: 2x required.
€14,54 €12,01
 
Handle Fendt, Massey Ferguson
Handle Fendt, Massey Ferguson
€38,29 €31,64
 
Fender bracket right complete Massey Ferguson 8600-8660
8%
Fender bracket right complete Massey Ferguson 8600-8660
€801,46 €662,36 €737,34 €609,37
 
Pivot right Massey Ferguson, Challenger, Valtra-Valmet
8%
Pivot right Massey Ferguson, Challenger, Valtra-Valmet
€591,17 €488,57 €543,88 €449,48
 
Scharmüller Forced steering inner part left Ball 80 to K50 250 mm, 2 ton
6%
Scharmüller
Forced steering inner part left Ball 80 to K50 250 mm, 2 ton
Assembly notes: Anticlockwise. Steering power: 2 t. Lock: K50. Description: Appr...
€481,06 €397,57 €453,50 €374,79
 
Walterscheid Adapter plate rail width 390 mm, hole pattern 160 x 100 mm, M21
21%
Walterscheid
Adapter plate rail width 390 mm, hole pattern 160 x 100 mm, M21
Rail width: 390 mm. Guide width: 32 mm. Detent pin Ø: 25 mm. Load capacity: 2800...
€1.150,89 €951,15 €909,90 €751,99
 
Rail pressure valve Valtra-Valmet N 104 - T 234, Massey Ferguson
8%
Rail pressure valve Valtra-Valmet N 104 - T 234, Massey Ferguson
€149,08 €123,21 €137,15 €113,35
 
Signal transmitter exhaust aftertreatment 930 mm
Signal transmitter exhaust aftertreatment 930 mm
Description: length: 930 mm.
€786,41 €649,93
 
Seal for return lubrication line
Seal for return lubrication line
€10,90 €9,01
 
Thermostat Ø 54 mm, 80 °C Massey Ferguson, Valtra, Fendt, Challenger
Thermostat Ø 54 mm, 80 °C Massey Ferguson, Valtra, Fendt, Challenger
Ø: 54 mm. Temperature: 80 °C.
€26,13 €21,59
 
Rocker arm 517 mm high, up to wheel size 28'' Massey Ferguson
8%
Rocker arm 517 mm high, up to wheel size 28'' Massey Ferguson
Version: 517 mm high, up to wheel size 28".
€190,28 €157,26 €175,06 €144,68
 
Temperature sensor A84-A134
8%
Temperature sensor A84-A134
€94,76 €78,31 €87,18 €72,05
 
Showing 49 - 80 of 80

Valtra S 374 parts for sensors, fenders and hitching

On a big tractor like the Valtra S 374, it is rarely a single wear part that needs attention. The sensors around the engine, the brackets that carry the fenders and the hitch at the rear all take their share. This page lists more than 70 replacement parts for the model from GRANIT, Scharmüller, Walterscheid, BOSCH and SACHS.

Engine and exhaust sensors

For the engine there are rail pressure sensors, temperature sensors, signal transmitters and NOx sensors. A rail pressure sensor reads the pressure in the fuel rail, and the injection is controlled from that reading. When working on the fuel system, keep everything spotlessly clean and shut the engine down well beforehand so the rail pressure has dropped. Seals for pressure pipes, silencer gaskets and O-rings make sure everything is tight again after the repair. A belt tensioner keeps the drive belt taut.

Fenders and fuel cap

Fender brackets and fender springs have a hard life on the road and on rough farm tracks. A broken bracket lets the fender hit the tyre, so replace a cracked one in good time and check the spring while you are there, since a tired spring lets the fender swing further. Vented fuel tank caps are listed too. If the vent blocks, a vacuum builds in the tank and the engine can stall mid job.

At the rear

For hitching there are drawbars, screw ball adapters and a retrofit swinging drawbar. If you pull a trailer with a steered axle, forced steering parts are on this page as well.

A NOx sensor on the S 374 calls for a patient approach. Let the exhaust cool, clean the area around the sensor and use penetrating oil if it is stuck. Follow the cable back to its plug and only disconnect it once you know where the new lead will run, because a cable resting against a hot exhaust part will not last. After fitting, it can take a while before the engine electronics recognise the new sensor and any warnings clear.

Model and reference number

Check the type plate for the model and serial number. With sensors, the reference number on the old unit is the safest guide, since plugs and threads can differ between versions. Check that number against the details listed with the part, and only then place your order.

The Valtra S 274 comes from the same line. For every other model from the brand, from older Valmet tractors to current series, go to Valtra parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart