Menu
EUR

Valtra T 153 tractor parts & technical data

A dead work light or electrics playing up on a Valtra T 153? This T3 series tractor has more than 110 parts listed here, from lighting to trailer couplings.

116 parts found for Valtra-Valmet T 153
Show:
MAHLE Gear reduction starter 3,2 kW, 11 teeth clockwise, 204,3 mm, Ø 89 mm
38%
MAHLE
Gear reduction starter 3,2 kW, 11 teeth clockwise, 204,3 mm, Ø 89 mm
€525,60 €434,38 €328,45 €271,45
 
NOX sensor Massey Ferguson, Valtra-Valmet, Fendt
5%
NOX sensor Massey Ferguson, Valtra-Valmet, Fendt
To fit: Massey Ferguson, Valtra-Valmet, Fendt.
€434,70 €359,26 €412,95 €341,28
 
LED headlight dipped beam / main beam 12 / 24 V, 167 x 107 x 78 mm
10%
LED headlight dipped beam / main beam 12 / 24 V, 167 x 107 x 78 mm
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs included:...
€124,89 €103,21 €112,95 €93,35
 
Scharmüller Drawbar frame prepared for drawbar 71,9 kN, 2000 kg, rail 335 mm
Scharmüller
Drawbar frame prepared for drawbar 71,9 kN, 2000 kg, rail 335 mm
Version: Prepared for drawbar | Detent pin Ø (mm): 22 | Load capacity (kg): 2000...
€1.228,70 €1.015,45
 
Belt tensioner Ø 75 mm, width 46,5 mm, Massey Ferguson and Fendt
Belt tensioner Ø 75 mm, width 46,5 mm, Massey Ferguson and Fendt
Outer Ø: 75 mm. Width: 46,5 mm.
€117,20 €96,86
 
Oil sump gasket Massey Ferguson, Case IH, Steyr, New Holland
5%
Oil sump gasket Massey Ferguson, Case IH, Steyr, New Holland
€74,31 €61,41 €70,55 €58,31
 
Cobo Contact switch mechanical brake light, clutch, PTO shaft, 12 / 24 V
Cobo
Contact switch mechanical brake light, clutch, PTO shaft, 12 / 24 V
Version: For brake light, clutch, four-wheel drive, PTO, 12/24 V, power rating: ...
€39,10 €32,31
 
GRANIT LED work lights spotlight 3600 lm, 36 W, 148 x 95 x 58 mm
10%
GRANIT
LED work lights spotlight 3600 lm, 36 W, 148 x 95 x 58 mm
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs included:...
€78,15 €64,59 €70,70 €58,43
 
Scharmüller Drawbar K50 Cramer, rail 335 mm, pin Ø 22 mm, 31 kN
12%
Scharmüller
Drawbar K50 Cramer, rail 335 mm, pin Ø 22 mm, 31 kN
Rail width: 335 mm. Guide width: 30 mm. Detent pin Ø: 22 mm. Load capacity: 250 ...
€907,50 €750,00 €802,55 €663,26
 
Wabco Trailer control valve 8 bar, M22 x 1,5, NW 10 mm
5%
Wabco
Trailer control valve 8 bar, M22 x 1,5, NW 10 mm
Working pressure (bar): 8 | Connection: M22 x 1.5 | Nominal width (mm): 10
€586,12 €484,40 €556,80 €460,17
 
SACHS Shock absorber rear, gas pressure MSE27/13X47A2 Valtra-Valmet
5%
SACHS
Shock absorber rear, gas pressure MSE27/13X47A2 Valtra-Valmet
Dimensions (mm): MSE27/13X47A2 | Installation location: Rear | Design: Gas press...
€669,43 €553,25 €635,95 €525,58
 
GRANIT Thermostat Ø 67 mm, 83 °C Fendt, Massey Ferguson
GRANIT
Thermostat Ø 67 mm, 83 °C Fendt, Massey Ferguson
Ø: 67 mm. Temperature: 83 °C.
€38,30 €31,65
 
HELLA Headlight left / right 12 / 24 V, H4, glass 164 x 103 mm, built-in Fendt
HELLA
Headlight left / right 12 / 24 V, H4, glass 164 x 103 mm, built-in Fendt
Bulb: 12V60/55W / H4, 12V4WK / T4W, 24V75/70W / H4, 24V4WK / T4W. Fixing: 3-poin...
€103,20 €85,29
 
GRANIT Tank cap engine cooling
5%
GRANIT
Tank cap engine cooling
€44,24 €36,56 €42,00 €34,71
 
GRANIT Oil drain valve M18 x 1,5
5%
GRANIT
Oil drain valve M18 x 1,5
Thread: M18 x 1.5.
€65,32 €53,98 €62,00 €51,24
 
Door lock, left Massey Ferguson, Case IH, Steyr
5%
Door lock, left Massey Ferguson, Case IH, Steyr
€47,50 €39,26 €45,10 €37,27
 
Walterscheid Adapter plate rail width 330 mm, hole pattern 160 x 100 mm, M21
21%
Walterscheid
Adapter plate rail width 330 mm, hole pattern 160 x 100 mm, M21
Guide width (mm): 32 | Description: The coupling plate is a height-adjustable sl...
€1.214,60 €1.003,80 €954,30 €788,68
 
GRANIT Gear reduction starter 12 V, 4,2 kW, 11 teeth, 226 mm, clockwise
5%
GRANIT
Gear reduction starter 12 V, 4,2 kW, 11 teeth, 226 mm, clockwise
€317,36 €262,28 €301,45 €249,13
 
Water pump Valtra-Valmet T 133 - T 213
5%
Water pump Valtra-Valmet T 133 - T 213
€510,38 €421,80 €484,85 €400,70
 
Scharmüller Drawbar ball 50 rail 335 mm, pin Ø 22 mm, 250 kg, AGCO gray
16%
Scharmüller
Drawbar ball 50 rail 335 mm, pin Ø 22 mm, 250 kg, AGCO gray
Rail width: 335 mm. Guide width: 30 mm. Detent pin Ø: 22 mm. Load capacity: 250 ...
€889,04 €734,74 €748,81 €618,85
 
Scharmüller Pick-Up Hitch einsätze 80 shank 60 x 80 mm, 417 mm, bore 26 mm
Scharmüller
Pick-Up Hitch einsätze 80 shank 60 x 80 mm, 417 mm, bore 26 mm
suitable for: Valtra. Series: C-Serie. Category: Pick-up hitch. Version: ball 80...
€1.375,55 €1.136,82
 
Thermostat Ø 54 mm, 80 °C Massey Ferguson, Valtra, Fendt, Challenger
Thermostat Ø 54 mm, 80 °C Massey Ferguson, Valtra, Fendt, Challenger
Ø: 54 mm. Temperature: 80 °C.
€25,00 €20,66
 
Scharmüller Drawbar ball 50, rail 200 mm, pin Ø 16 mm, 150 kg
Scharmüller
Drawbar ball 50, rail 200 mm, pin Ø 16 mm, 150 kg
Rail width: 200 mm. Guide width: 25 mm. Detent pin Ø: 16 mm. Load capacity: 150 ...
€561,80 €464,30
 
Seal for return lubrication line
Seal for return lubrication line
€10,45 €8,64
 
Showing 1 - 24 of 116

Valtra T 153 parts: cooling, seals and lights

When the temperature gauge on a T 153 starts to creep up during summer cultivation, the cooling system is where the hunt begins, so that is where this page starts too. Altogether there are more than 110 parts here for this Valtra from the T3 line, from makers such as GRANIT, Scharmüller, DANA Spicer, Walterscheid and BOSCH.

Thermostats, hoses and the fan drive

The cooling circuit is covered by thermostats, a top radiator hose, a cooling fan and a fan clutch. A temperature sensor for the common rail Sisu engine tells the engine control unit how hot the coolant is. Tensioning pulleys keep the belt tight, and a fresh water pump gasket stops seepage at the pump.

When you change the thermostat, always fit a new gasket or O-ring, clean the mating face properly and bleed the system afterwards with the engine idling and the heater open. An air pocket around the sensor gives false readings, and you end up chasing a fault that is not there.

The fan clutch deserves attention too. If the fan turns just as freely by hand with a hot engine as with a cold one, the clutch is no longer engaging and the radiator gets too little air. Oil traces around the hub point the same way. A tensioning pulley that hums or has play is best replaced together with the belt.

Seals around engine and turbo

There is also a gasket for the silencer at the turbocharger, a seal for the lubrication line and O-rings, including one for the oil filler cap. If the turbo weeps oil at its lubrication line, change both seals on that line together.

Lamps, cab door and hitch

Headlights, LED headlights and work lamps fit as well, along with a cab door lock and drawbars with a ball. Separate balls are available for when only the head of a ball hitch has worn.

Reading the type plate and the old part

The type plate on the T 153 shows the type and chassis number. For hoses and sensors that is usually enough to confirm the fit. For a gasket or thermostat, read the number off the old part, since thermostats differ in opening temperature and that has to suit your engine.

From the same T3 line, these types each have their own page: Valtra T 163, Valtra T 203 and Valtra T 213. If one of those bigger siblings works on your farm, order its parts from that page. Other Valtra tractors and the older Valmet models are reachable via Valtra parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart