Menu
EUR

Valtra T 202 tractor parts & technical data

Find more than 100 parts for the Valtra T 202 from the T2 series here. Go straight to the group you need, such as trailer couplings, lighting or electrics.

104 parts found for Valtra-Valmet T 202
Show:
Scharmüller Adapter plate rail width 335 mm, hole pattern 140 x 80 mm, M20
Scharmüller
Adapter plate rail width 335 mm, hole pattern 140 x 80 mm, M20
Load capacity: 3000 kg. D-value: 89,3 kN. Rail width: 335 mm. Hole pattern: 140 ...
€638,19 €527,43
 
LED headlight dipped beam / main beam 12 / 24 V, 167 x 107 x 78 mm
8%
LED headlight dipped beam / main beam 12 / 24 V, 167 x 107 x 78 mm
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs included:...
€124,12 €102,58 €114,19 €94,37
 
Walterscheid Drawbar manual rail width 330 mm, coupling pin 31 mm, 92 kN
21%
Walterscheid
Drawbar manual rail width 330 mm, coupling pin 31 mm, 92 kN
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 31 ...
€1.104,81 €913,07 €873,47 €721,88
 
DANA Spicer Plug front axle 745
DANA Spicer
Plug front axle 745
€20,26 €16,75
 
Scharmüller Drawbar frame prepared for drawbar 71,9 kN, 2000 kg, rail 335 mm
4%
Scharmüller
Drawbar frame prepared for drawbar 71,9 kN, 2000 kg, rail 335 mm
Version: Prepared for drawbar | Detent pin Ø (mm): 22 | Load capacity (kg): 2000...
€1.275,80 €1.054,38 €1.223,74 €1.011,36
 
Wabco Trailer control valve 8 bar, M22 x 1,5, NW 10 mm
8%
Wabco
Trailer control valve 8 bar, M22 x 1,5, NW 10 mm
Working pressure (bar): 8 | Connection: M22 x 1.5 | Nominal width (mm): 10
€630,05 €520,70 €579,65 €479,05
 
Start switch 12 V, Ø 16,5 mm, lock K 11-2 keys
Start switch 12 V, Ø 16,5 mm, lock K 11-2 keys
Version: 12 V, with 4 blade terminal connections, Switch positions: 0: off, 1: c...
€16,13 €13,33
 
Walterscheid Ball hitch K80 330 / 25 / 32 mm, 2800 kg, 97,1 kN
19%
Walterscheid
Ball hitch K80 330 / 25 / 32 mm, 2800 kg, 97,1 kN
Quick height adjustment with rotation lock, load capacity up to 40 km/h 2800 kg,...
€2.111,26 €1.744,84 €1.719,18 €1.420,81
 
BOSCH High-pressure pump CP1H Fendt, Massey Ferguson, Valtra-Valmet
15%
BOSCH
High-pressure pump CP1H Fendt, Massey Ferguson, Valtra-Valmet
€1.964,66 €1.623,69 €1.665,11 €1.376,13
 
Cobo Contact switch mechanical brake light, clutch, PTO shaft, 12 / 24 V
8%
Cobo
Contact switch mechanical brake light, clutch, PTO shaft, 12 / 24 V
Version: For brake light, clutch, four-wheel drive, PTO, 12/24 V, power rating: ...
€32,65 €26,98 €30,04 €24,82
 
Scharmüller Support plate Piton Fix manual, 445 x 220 x 40 mm, 3 ton, AGCO gray
8%
Scharmüller
Support plate Piton Fix manual, 445 x 220 x 40 mm, 3 ton, AGCO gray
D-value (kN): 71,9 | Category: Support plates | Lock: Piton Fix manual | Version...
€987,09 €815,78 €908,12 €750,51
 
Wiper motor Massey Ferguson, Valtra-Valmet
8%
Wiper motor Massey Ferguson, Valtra-Valmet
€223,30 €184,55 €205,44 €169,78
 
Filter dryer Ø 76 mm, 228 mm, connection thread M
8%
Filter dryer Ø 76 mm, 228 mm, connection thread M
Outer Ø (mm): 76 | Connection: O-ring A = male thread 3/8"" - 18UNF O-ring B = m...
€63,79 €52,72 €58,69 €48,50
 
Expansion valve airco 1/2 inch o-ring, 35 g
8%
Expansion valve airco 1/2 inch o-ring, 35 g
Weight (g): 35 | Equipment: O-ring | Connection thread A: # 8, 1/2"" O-ring | Co...
€54,07 €44,69 €49,74 €41,11
 
Walterscheid Adapter plate rail width 330 mm, hole pattern 160 x 100 mm, M21
21%
Walterscheid
Adapter plate rail width 330 mm, hole pattern 160 x 100 mm, M21
Guide width (mm): 32 | Description: The coupling plate is a height-adjustable sl...
€1.207,08 €997,59 €954,33 €788,70
 
Scharmüller Drawbar ball 50, rail 200 mm, pin Ø 16 mm, 150 kg
8%
Scharmüller
Drawbar ball 50, rail 200 mm, pin Ø 16 mm, 150 kg
Rail width: 200 mm. Guide width: 25 mm. Detent pin Ø: 16 mm. Load capacity: 150 ...
€583,34 €482,10 €536,67 €443,53
 
Cooling fan Ø 600 mm Massey Ferguson, Valtra - Valmet
8%
Cooling fan Ø 600 mm Massey Ferguson, Valtra - Valmet
Ø: 600 mm. To fit: Massey Ferguson, Valtra - Valmet.
€185,59 €153,38 €170,74 €141,11
 
Gas strut door 250 N, 345 mm, stroke 126 mm Massey Ferguson 4745ZN
8%
Gas strut door 250 N, 345 mm, stroke 126 mm Massey Ferguson 4745ZN
suitable for: Tür. Newtons: 250. A: 345 mm. B: 175 mm. C: 8 mm. D: 8 mm. Form: 2...
€34,26 €28,31 €31,52 €26,05
 
SANDEN Aircon compressor SD7H15 12 V, pulley Ø 132 mm, 2 grooves Valtra-Valmet
8%
SANDEN
Aircon compressor SD7H15 12 V, pulley Ø 132 mm, 2 grooves Valtra-Valmet
Oil quantity (ccm): 135 | Suitable oil: SP - 10 | Refrigerant: R 134a | Connecti...
€586,48 €484,69 €539,56 €445,92
 
Alternator 12 V / 65 A Challenger, JCB, Massey Ferguson, Valtra-Valmet
8%
Alternator 12 V / 65 A Challenger, JCB, Massey Ferguson, Valtra-Valmet
Installation angle (°): l 60 | Charging current (A): 65 | Additional information...
€256,15 €211,69 €235,66 €194,76
 
Clutches set 7+7 Valtra-Valmet 6250 - 8950, C90 - XM150
8%
Clutches set 7+7 Valtra-Valmet 6250 - 8950, C90 - XM150
€171,21 €141,50 €157,51 €130,18
 
Clutches set 9+9 Valtra-Valmet 6250 - 8950, C90 - XM150
8%
Clutches set 9+9 Valtra-Valmet 6250 - 8950, C90 - XM150
€230,48 €190,48 €212,04 €175,24
 
SACHS Shock absorber rear, gas pressure MSE27/13X47A2 Valtra-Valmet
8%
SACHS
Shock absorber rear, gas pressure MSE27/13X47A2 Valtra-Valmet
Dimensions (mm): MSE27/13X47A2 | Installation location: Rear | Design: Gas press...
€698,55 €577,31 €642,67 €531,13
 
DANA Spicer King pin final drive front axle 755
8%
DANA Spicer
King pin final drive front axle 755
€114,51 €94,64 €105,35 €87,07
 
MAHLE Gear reduction starter 3,2 kW, 11 teeth clockwise, 204,3 mm, Ø 89 mm
40%
MAHLE
Gear reduction starter 3,2 kW, 11 teeth clockwise, 204,3 mm, Ø 89 mm
€548,46 €453,27 €328,50 €271,49
 
Gear reduction starter 12 V, 4,2 kW, 11 teeth, 226 mm, clockwise
8%
Gear reduction starter 12 V, 4,2 kW, 11 teeth, 226 mm, clockwise
€331,16 €273,69 €304,67 €251,79
 
Master brake cylinder with front axle brakes, mineral oil Valtra-Valmet
8%
Master brake cylinder with front axle brakes, mineral oil Valtra-Valmet
€1.214,02 €1.003,32 €1.116,90 €923,06
 
Scharmüller Drawbar frame 10 kN, rail width 200 mm, nose weight 350 kg
8%
Scharmüller
Drawbar frame 10 kN, rail width 200 mm, nose weight 350 kg
Version: Standard | Category: Bearing supports | Guide width (mm): 25 | Rail wid...
€668,46 €552,45 €614,98 €508,25
 
PTO shaft end piece 1 3/8 inch, 6 splines, 245 mm Valtra-Valmet
8%
PTO shaft end piece 1 3/8 inch, 6 splines, 245 mm Valtra-Valmet
Version: 1 3/8"", 6 grooves | Length (mm): 245
€415,22 €343,16 €382,00 €315,70
 
CARLISLE External plate Hi-Lo 1,5 mm, inner 98,9 mm, outer 142,5 mm, 6 teeth
CARLISLE
External plate Hi-Lo 1,5 mm, inner 98,9 mm, outer 142,5 mm, 6 teeth
Version: thickness = 1,5 mm inner = 98,9 mm outer = 142,5 mm 6 teeth
€17,19 €14,20
 
Aircon compressor 12 V, Ø 132 mm, 2 grooves, 210 ccm
8%
Aircon compressor 12 V, Ø 132 mm, 2 grooves, 210 ccm
No. of grooves: 2 | Nominal voltage (V): 12 | Connection: 7/8"" x 3/4"", vertica...
€426,97 €352,87 €392,81 €324,64
 
DANA Spicer O-ring as front axle 745, 4 g
DANA Spicer
O-ring as front axle 745, 4 g
€17,60 €14,55
 
DANA Spicer Spacer as front axle 745, outer-Ø 150 mm, inner-Ø 120 mm, 1 mm
8%
DANA Spicer
Spacer as front axle 745, outer-Ø 150 mm, inner-Ø 120 mm, 1 mm
Thickness (mm): 1 | Outer Ø (mm): 150 | Inner Ø (mm): 120
€46,81 €38,69 €43,07 €35,59
 
DANA Spicer Intermediate bush as front axle 745, 120 x 127 x 40 mm
8%
DANA Spicer
Intermediate bush as front axle 745, 120 x 127 x 40 mm
Dimensions (mm): 120 x 127 x 40 | Inner Ø (mm): 120 | Height (mm): 40 | Outer Ø ...
€140,42 €116,05 €129,19 €106,77
 
Clutch plate set omkeerinrichting Valtra-Valmet
8%
Clutch plate set omkeerinrichting Valtra-Valmet
€486,96 €402,45 €448,00 €370,25
 
Scharmüller Pick-Up Hitch einsätze 80 shank 60 x 80 mm, 417 mm, bore 26 mm
8%
Scharmüller
Pick-Up Hitch einsätze 80 shank 60 x 80 mm, 417 mm, bore 26 mm
suitable for: Valtra. Series: C-Serie. Category: Pick-up hitch. Version: ball 80...
€1.428,29 €1.180,41 €1.314,03 €1.085,97
 
Outlet valve Fendt, Massey Ferguson
Outlet valve Fendt, Massey Ferguson
€58,29 €48,18
 
Fan clutch Valtra N103.4-N163, T132-T202, T133-T203
8%
Fan clutch Valtra N103.4-N163, T132-T202, T133-T203
€726,26 €600,21 €668,16 €552,20
 
Walterscheid Drawbar ball 80 rail 330 mm, pin Ø 25 mm, 4000 kg, black
21%
Walterscheid
Drawbar ball 80 rail 330 mm, pin Ø 25 mm, 4000 kg, black
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000...
€2.152,79 €1.779,17 €1.702,02 €1.406,63
 
LED work lights spotlight 3600 lm, 36 W, 148 x 95 x 58 mm
8%
LED work lights spotlight 3600 lm, 36 W, 148 x 95 x 58 mm
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs included:...
€77,66 €64,18 €71,45 €59,05
 
Aircon compressor 12 V, pulley Ø 132 mm, 2 grooves, 135 ccm oil
8%
Aircon compressor 12 V, pulley Ø 132 mm, 2 grooves, 135 ccm oil
Reference no.: QP7H15-8024 | Suitable oil: PAG 46 | For compressor: 7H15 | Nomin...
€357,93 €295,81 €329,30 €272,15
 
Showing 1 - 48 of 104

Valtra T 202 parts for cooling, cab and hitch

This page brings together more than 100 replacement parts that fit the Valtra T 202, from makers such as GRANIT, BOSCH, DANA Spicer, Walterscheid and Scharmüller. They cover three areas that take real punishment on a tractor of this size: the cooling system, the cab with its lighting, and the hitch at the rear.

Cooling system and engine seals

On the cooling side there are thermostats with their gaskets, a cooling fan and fan clutches, together with crankshaft seals. Smaller items include seals for a lubrication line and O-rings such as the one for the oil filler cap. These are small items and easy to overlook, yet a weeping seal is often what turns a clean engine into an oily one.

When you change the thermostat, fit a new gasket every time, clean both faces carefully and bleed the system while the engine warms up. Trapped air gives the same erratic gauge reading as a sticking thermostat, which can send you chasing the wrong fault. If the temperature still wanders, check the fan clutch as well. With a hot engine the fan should be noticeably harder to turn by hand than when it is cold.

Lights, air conditioning and cab

Headlights, work lamps and LED headlights with dipped and main beam are available for the T 202, along with door locks for the cab. The aircon compressor is also part of the range. If you replace it, renew the receiver drier at the same time and check the oil charge, because moisture left in an old drier shortens the life of a new compressor.

Drawbar and hitch

At the back you will find drawbar balls, separate balls and adapter plates. Measure the rail width and pin diameter on the existing drawbar before ordering, so the replacement lines up with the mounting on your tractor without packing or drilling. Grease the ball lightly and check the locking mechanism at every service, because a worn catch is a real hazard on the road.

Matching the right part to your T 202

The rating plate on the tractor gives the exact type designation, and that is the first thing to check. If the old part is already off, look for a stamped reference number or a label and compare it with the parts on this page. For headlights and door locks, also note which side you need, left or right, because the housings are mirrored and will not swap across.

For other tractors from the same make, the Valtra parts overview gives every type its own page, which saves time if you run more than one Valtra on the farm.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart