Menu
EUR

Valtra T 213 tractor parts & technical data

Maintaining a Valtra T 213 from the T3 series? Choose from more than 120 parts here, with trailer couplings, lighting and electrics at the top of the list.

122 parts found for Valtra-Valmet T 213
Show:
Installation cable mini-contact plug 1 m
8%
Installation cable mini-contact plug 1 m
Length: 1 m. Technical data: Closure: 1.0 m. Reference no.: 1762510.
€171,07 €141,38 €157,38 €130,07
 
Scharmüller Adapter plate rail width 335 mm, hole pattern 140 x 80 mm, M20
Scharmüller
Adapter plate rail width 335 mm, hole pattern 140 x 80 mm, M20
Load capacity: 3000 kg. D-value: 89,3 kN. Rail width: 335 mm. Hole pattern: 140 ...
€638,19 €527,43
 
DANA Spicer Gear ring final drive front axle 750/201
DANA Spicer
Gear ring final drive front axle 750/201
€565,28 €467,18
 
LED headlight dipped beam / main beam 12 / 24 V, 167 x 107 x 78 mm
8%
LED headlight dipped beam / main beam 12 / 24 V, 167 x 107 x 78 mm
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs included:...
€124,12 €102,58 €114,19 €94,37
 
Walterscheid Drawbar manual rail width 330 mm, coupling pin 31 mm, 92 kN
21%
Walterscheid
Drawbar manual rail width 330 mm, coupling pin 31 mm, 92 kN
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 31 ...
€1.104,81 €913,07 €873,47 €721,88
 
DANA Spicer Plug front axle 745
DANA Spicer
Plug front axle 745
€20,26 €16,75
 
Scharmüller Drawbar frame prepared for drawbar 71,9 kN, 2000 kg, rail 335 mm
4%
Scharmüller
Drawbar frame prepared for drawbar 71,9 kN, 2000 kg, rail 335 mm
Version: Prepared for drawbar | Detent pin Ø (mm): 22 | Load capacity (kg): 2000...
€1.275,80 €1.054,38 €1.223,74 €1.011,36
 
Wabco Trailer control valve 8 bar, M22 x 1,5, NW 10 mm
8%
Wabco
Trailer control valve 8 bar, M22 x 1,5, NW 10 mm
Working pressure (bar): 8 | Connection: M22 x 1.5 | Nominal width (mm): 10
€630,05 €520,70 €579,65 €479,05
 
BOSCH Fuel pre-filter line filter D 37 mm, H 105 mm, connection 6 mm
BOSCH
Fuel pre-filter line filter D 37 mm, H 105 mm, connection 6 mm
C (mm): 35 | F: 6 | D (mm): 37 | H (mm): 105 | Height (mm): 105 | Version: Leitu...
€3,99 €3,30
 
NOX sensor Massey Ferguson, Valtra-Valmet, Fendt
8%
NOX sensor Massey Ferguson, Valtra-Valmet, Fendt
To fit: Massey Ferguson, Valtra-Valmet, Fendt.
€453,61 €374,88 €417,32 €344,89
 
Start switch 12 V, Ø 16,5 mm, lock K 11-2 keys
Start switch 12 V, Ø 16,5 mm, lock K 11-2 keys
Version: 12 V, with 4 blade terminal connections, Switch positions: 0: off, 1: c...
€16,13 €13,33
 
Walterscheid Ball hitch K80 330 / 25 / 32 mm, 2800 kg, 97,1 kN
19%
Walterscheid
Ball hitch K80 330 / 25 / 32 mm, 2800 kg, 97,1 kN
Quick height adjustment with rotation lock, load capacity up to 40 km/h 2800 kg,...
€2.111,26 €1.744,84 €1.719,18 €1.420,81
 
Cobo Contact switch mechanical brake light, clutch, PTO shaft, 12 / 24 V
8%
Cobo
Contact switch mechanical brake light, clutch, PTO shaft, 12 / 24 V
Version: For brake light, clutch, four-wheel drive, PTO, 12/24 V, power rating: ...
€32,65 €26,98 €30,04 €24,82
 
Scharmüller Support plate Piton Fix manual, 445 x 220 x 40 mm, 3 ton, AGCO gray
8%
Scharmüller
Support plate Piton Fix manual, 445 x 220 x 40 mm, 3 ton, AGCO gray
D-value (kN): 71,9 | Category: Support plates | Lock: Piton Fix manual | Version...
€987,09 €815,78 €908,12 €750,51
 
Wiper motor Massey Ferguson, Valtra-Valmet
8%
Wiper motor Massey Ferguson, Valtra-Valmet
€223,30 €184,55 €205,44 €169,78
 
Expansion valve airco 1/2 inch o-ring, 35 g
8%
Expansion valve airco 1/2 inch o-ring, 35 g
Weight (g): 35 | Equipment: O-ring | Connection thread A: # 8, 1/2"" O-ring | Co...
€54,07 €44,69 €49,74 €41,11
 
Walterscheid Adapter plate rail width 330 mm, hole pattern 160 x 100 mm, M21
21%
Walterscheid
Adapter plate rail width 330 mm, hole pattern 160 x 100 mm, M21
Guide width (mm): 32 | Description: The coupling plate is a height-adjustable sl...
€1.207,08 €997,59 €954,33 €788,70
 
Scharmüller Drawbar ball 50, rail 200 mm, pin Ø 16 mm, 150 kg
8%
Scharmüller
Drawbar ball 50, rail 200 mm, pin Ø 16 mm, 150 kg
Rail width: 200 mm. Guide width: 25 mm. Detent pin Ø: 16 mm. Load capacity: 150 ...
€583,34 €482,10 €536,67 €443,53
 
SANDEN Aircon compressor 12 V, Ø 119 mm, 6 grooves Valtra-Valmet
8%
SANDEN
Aircon compressor 12 V, Ø 119 mm, 6 grooves Valtra-Valmet
Fixing: DM | Refrigerant: R 134a | No. of grooves: 6 | Nominal voltage (V): 12 |...
€646,52 €534,31 €594,80 €491,57
 
Cooling fan Ø 600 mm Massey Ferguson, Valtra - Valmet
8%
Cooling fan Ø 600 mm Massey Ferguson, Valtra - Valmet
Ø: 600 mm. To fit: Massey Ferguson, Valtra - Valmet.
€185,59 €153,38 €170,74 €141,11
 
Gas strut door 250 N, 345 mm, stroke 126 mm Massey Ferguson 4745ZN
8%
Gas strut door 250 N, 345 mm, stroke 126 mm Massey Ferguson 4745ZN
suitable for: Tür. Newtons: 250. A: 345 mm. B: 175 mm. C: 8 mm. D: 8 mm. Form: 2...
€34,26 €28,31 €31,52 €26,05
 
Alternator 12 V / 65 A Challenger, JCB, Massey Ferguson, Valtra-Valmet
8%
Alternator 12 V / 65 A Challenger, JCB, Massey Ferguson, Valtra-Valmet
Installation angle (°): l 60 | Charging current (A): 65 | Additional information...
€256,15 €211,69 €235,66 €194,76
 
Clutches set 7+7 Valtra-Valmet 6250 - 8950, C90 - XM150
8%
Clutches set 7+7 Valtra-Valmet 6250 - 8950, C90 - XM150
€171,21 €141,50 €157,51 €130,18
 
LED main headlight round 126 x 110 x 76 mm, H11, 12/24 V
8%
LED main headlight round 126 x 110 x 76 mm, H11, 12/24 V
EMC: CISPR 25 class 3 | Light function: Dipped beam | Theoretical luminous flux ...
€87,50 €72,31 €80,50 €66,53
 
Clutches set 9+9 Valtra-Valmet 6250 - 8950, C90 - XM150
8%
Clutches set 9+9 Valtra-Valmet 6250 - 8950, C90 - XM150
€230,48 €190,48 €212,04 €175,24
 
SACHS Shock absorber rear, gas pressure MSE27/13X47A2 Valtra-Valmet
8%
SACHS
Shock absorber rear, gas pressure MSE27/13X47A2 Valtra-Valmet
Dimensions (mm): MSE27/13X47A2 | Installation location: Rear | Design: Gas press...
€698,55 €577,31 €642,67 €531,13
 
DANA Spicer King pin final drive front axle 755
8%
DANA Spicer
King pin final drive front axle 755
€114,51 €94,64 €105,35 €87,07
 
MAHLE Gear reduction starter 3,2 kW, 11 teeth clockwise, 204,3 mm, Ø 89 mm
40%
MAHLE
Gear reduction starter 3,2 kW, 11 teeth clockwise, 204,3 mm, Ø 89 mm
€548,46 €453,27 €328,50 €271,49
 
Gear reduction starter 12 V, 4,2 kW, 11 teeth, 226 mm, clockwise
8%
Gear reduction starter 12 V, 4,2 kW, 11 teeth, 226 mm, clockwise
€331,16 €273,69 €304,67 €251,79
 
Master brake cylinder with front axle brakes, mineral oil Valtra-Valmet
8%
Master brake cylinder with front axle brakes, mineral oil Valtra-Valmet
€1.214,02 €1.003,32 €1.116,90 €923,06
 
Scharmüller Drawbar frame 10 kN, rail width 200 mm, nose weight 350 kg
8%
Scharmüller
Drawbar frame 10 kN, rail width 200 mm, nose weight 350 kg
Version: Standard | Category: Bearing supports | Guide width (mm): 25 | Rail wid...
€668,46 €552,45 €614,98 €508,25
 
PTO shaft end piece 1 3/8 inch, 6 splines, 245 mm Valtra-Valmet
8%
PTO shaft end piece 1 3/8 inch, 6 splines, 245 mm Valtra-Valmet
Version: 1 3/8"", 6 grooves | Length (mm): 245
€415,22 €343,16 €382,00 €315,70
 
CARLISLE External plate Hi-Lo 1,5 mm, inner 98,9 mm, outer 142,5 mm, 6 teeth
CARLISLE
External plate Hi-Lo 1,5 mm, inner 98,9 mm, outer 142,5 mm, 6 teeth
Version: thickness = 1,5 mm inner = 98,9 mm outer = 142,5 mm 6 teeth
€17,19 €14,20
 
DANA Spicer O-ring as front axle 745, 4 g
DANA Spicer
O-ring as front axle 745, 4 g
€17,60 €14,55
 
DANA Spicer Spacer as front axle 745, outer-Ø 150 mm, inner-Ø 120 mm, 1 mm
8%
DANA Spicer
Spacer as front axle 745, outer-Ø 150 mm, inner-Ø 120 mm, 1 mm
Thickness (mm): 1 | Outer Ø (mm): 150 | Inner Ø (mm): 120
€46,81 €38,69 €43,07 €35,59
 
DANA Spicer Intermediate bush as front axle 745, 120 x 127 x 40 mm
8%
DANA Spicer
Intermediate bush as front axle 745, 120 x 127 x 40 mm
Dimensions (mm): 120 x 127 x 40 | Inner Ø (mm): 120 | Height (mm): 40 | Outer Ø ...
€140,42 €116,05 €129,19 €106,77
 
Clutch plate set omkeerinrichting Valtra-Valmet
8%
Clutch plate set omkeerinrichting Valtra-Valmet
€486,96 €402,45 €448,00 €370,25
 
Scharmüller Pick-Up Hitch einsätze 80 shank 60 x 80 mm, 417 mm, bore 26 mm
8%
Scharmüller
Pick-Up Hitch einsätze 80 shank 60 x 80 mm, 417 mm, bore 26 mm
suitable for: Valtra. Series: C-Serie. Category: Pick-up hitch. Version: ball 80...
€1.428,29 €1.180,41 €1.314,03 €1.085,97
 
BOSCH Pressure regulator CP4 Valtra-Valmet, Fendt, Massey Ferguson
15%
BOSCH
Pressure regulator CP4 Valtra-Valmet, Fendt, Massey Ferguson
€184,72 €152,66 €156,56 €129,39
 
Outlet valve Fendt, Massey Ferguson
Outlet valve Fendt, Massey Ferguson
€58,29 €48,18
 
Turbocharger Valtra-Valmet T 133 - T 213, Massey Ferguson 7600, 7700
4%
Turbocharger Valtra-Valmet T 133 - T 213, Massey Ferguson 7600, 7700
€2.661,24 €2.199,37 €2.550,30 €2.107,69
 
Showing 1 - 48 of 122

Valtra T 213 parts with a focus on cooling

When the temperature gauge on a Valtra T 213 starts creeping up, the cause is often a small component. A thermostat that no longer opens, a radiator hose gone soft, a sensor sending the wrong reading. This page holds more than 120 replacement parts for the T 213, from GRANIT, BOSCH, Walterscheid, DANA Spicer and Scharmüller.

Cooling and engine

On the cooling side there are thermostats, radiator hoses, a cooling fan and engine temperature sensors. Always fit a thermostat with a fresh gasket and bleed the system properly afterwards, since an air pocket at the thermostat makes it open late. There is also a tensioning pulley for the belt drive. If you hear a hum or rattle at the front of the engine, spin the pulley by hand: roughness or play means it is time for a new one.

You will also find gaskets, including one at the exhaust by the turbocharger, seals for pressure lines and O-rings such as the one on the oil filler cap.

Lights, cab and hitch

For working after dark there are work lamps, headlights and an LED headlight, along with connection cables for tidy wiring. In the cab there is a door lock. At the rear, a drawbar ball and a separate ball fit the hitch rail.

A tip on the cooling fan

If the cooling fan is not doing its job, the temperature climbs under heavy work or in hot weather while staying normal under light load. With the engine off, look for chipped or cracked blades and feel whether the hub has play. Blow the radiator and the coolers in front of it clean with compressed air regularly, working from the inside out. Dust and chaff between the fins hold back more heat than you would expect. If the temperature sensor gives odd readings, check its plug for corrosion before replacing the sensor.

Identifying the right part

The Valtra T series comes in several types, so check the type plate first to confirm the tractor is a T 213, then compare the reference number on the old part. With a thermostat, the opening temperature printed on it matters too, and with a radiator hose the position, upper or lower.

The other types in the T series each have a page with their own parts:

Brand-wide items are collected under Valtra parts, together with parts that are not tied to a single type.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart